Re: [HSL] Abridged summary of heatsynclabs@googlegroups.com - 100 Messages in 16 Topics
3 views
Skip to first unread message
Vinnie Chapman
Oct 23, 2012, 9:05:44 AM10/23/12
to heatsy...@googlegroups.com, wm...@googlegroups.com
HeatSync Labs is hold a safety meeting for on Thursday November 1st at
7pm. Since the club often uses the lab for radio and other purposes, I
am encouraging all members of the club to attend this safety meeting.
Vinnie
On 10/22/2012 06:31 PM, heatsy...@googlegroups.com wrote:
> Today's Topic Summary
>
> Group: http://groups.google.com/group/heatsynclabs/topics
>
> * Safety Meeting <#group_thread_0> [7 Updates]
> * Actual wishlist link <#group_thread_1> [4 Updates]
> * west side location offer <#group_thread_2> [26 Updates]
> * It's ALIVE! 3D printer's first movements <#group_thread_3> [5 Updates]
> * Safeway can deliver us soda <#group_thread_4> [10 Updates]
> * Selfstarter <#group_thread_5> [4 Updates]
> * Dale Dougherty from Make visits tomorrow (Tue) Night, 7pm!
> <#group_thread_6> [1 Update]
> * Looking fo thermal adhesive <#group_thread_7> [7 Updates]
> * proposal for Solids Works training and 3D printer/ CNC training,
> whistle/piston motor <#group_thread_8> [4 Updates]
> * Hot Topics Call for Speakers <#group_thread_9> [8 Updates]
> * Vector logo for Heatsync <#group_thread_10> [8 Updates]
> * Use a respirator, idiot <#group_thread_11> [5 Updates]
> * Laser Tag or Paintballing? <#group_thread_12> [1 Update]
> * Anybody in San Tan Valley? <#group_thread_13> [1 Update]
> * HackRF <#group_thread_14> [1 Update]
> * New to AZ and hackerspace <#group_thread_15> [8 Updates]
>
> Safety Meeting
> <http://groups.google.com/group/heatsynclabs/t/b617ed737f452184>
>
> Austin Kipp <zapki...@gmail.com> Oct 22 02:34PM -0700
>
> Many of you have safety ideas for the lab. I would love to hear all of
> them. As well as any safety concerns you may have. So I�m holding a
> meeting
> at the lab on Thursday Nov 1, 2012 @ 7:00pm. ...more
> <http://groups.google.com/group/heatsynclabs/msg/1fdc3875748f96b9>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 02:45PM -0700
>
> Calendered.
>
> On Monday, 22 October 2012 14:34:18 UTC-7, Austin Kipp wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/82863860124a77e1>
>
> Paul Hickey <paulh...@gmail.com> Oct 22 04:14PM -0700
>
> I'm in
>
>
>
> --
> Paul Hickey
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/e31c951990a8fdfe>
>
> Doug Shade <doug....@gmail.com> Oct 22 04:37PM -0700
>
> When first introduced to the lab, I was surprised to see a radial
> arm saw.
> I am an experienced woodworker and perfectly comfortable using this
> tool
> myself... but the thought of anyone else using ...more
> <http://groups.google.com/group/heatsynclabs/msg/a83b83513c0600ba>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 04:46PM -0700
>
> I tend to agree with that sentiment. I've only seen it used twice, and
> both times were, at best, nervewracking for me and the user. An RAS is
> great for the amount of space we have, but it's my ...more
> <http://groups.google.com/group/heatsynclabs/msg/433d3b61931be855>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 04:51PM -0700
>
> Squeeze in a table saw instead? Maybe have someone who is
> comfortable using
> it swap it for a medium sized table saw?
>
> Mike
>
> On Monday, October 22, 2012 4:46:38 PM UTC-7, Nate Plamondon wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/122ad48333c1bff1>
>
> Will Bradley <bradle...@gmail.com> Oct 22 05:46PM -0700
>
> You're supposed to pull the saw out, put the wood in, turn it on,
> and push
> the saw away from you, right? Cutting with the rotation is always
> dangerous
> regardless of tool.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a1e5abd5abc1252d>
>
> Actual wishlist link
> <http://groups.google.com/group/heatsynclabs/t/232919339717b0cf>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 04:06PM -0700
>
> So we received a microsoft webcam today at the lab addressed to
> HeatSync
> Labs Wishlist from L&D Sales and Marketing.
>
> I dont see it as purchased from our amazon wishlist though?
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/9f4c1be947ce115b>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 04:19PM -0700
>
> Sorry, that was me. It's for the 3D printer.
>
> Err, it's to point at the 3D printer so that people can see:
>
> 1) If the printer is in use
> 2) If their long job is complete/failed, if they have left ...more
> <http://groups.google.com/group/heatsynclabs/msg/b6801f04a31e112d>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 04:20PM -0700
>
> its on your box
>
> --
> Jacob Rosenthal
> Sent with Sparrow (http://www.sparrowmailapp.com/?sig)
>
>
> On Monday, October 22, 2012 at 4:19 PM, Ryan Mcdermott wrote:
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/e8c011c6e56be579>
>
> Ryan Rix <r...@n.rix.si> Oct 22 04:59PM -0700
>
> YES YES YES I love you blhack. I was about to buy one.
>
> On Mon 22 October 2012 16:20:03 Jacob Rosenthal wrote:
> > > unattended.
>
> > > -Notrix
>
> > > On Mon, Oct 22, 2012 at 4:06 PM, Jacob Rosenthal ...more
> <http://groups.google.com/group/heatsynclabs/msg/b02e9ffa90185f9e>
>
> west side location offer
> <http://groups.google.com/group/heatsynclabs/t/41766e926148d678>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 10:50AM -0700
>
> Hello,
>
> I use to be a active member back when you where in gangplank, but i
> live on
> the west side. the drive was about a hr or so and soon stopped going. I
> loved the group just the drive was a ...more
> <http://groups.google.com/group/heatsynclabs/msg/9b34e83188fc89f1>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 11:02AM -0700
>
> Chris, I work RIGHT up the street from you, and would LOVE to be able to
> come by and use some of this stuff...
>
> When would be a good time to set up a tour?
>
> On Mon, Oct 22, 2012 at 10:50 AM, ...more
> <http://groups.google.com/group/heatsynclabs/msg/bc6c02d1825e02cb>
>
> Paul Hickey <paulh...@gmail.com> Oct 22 11:06AM -0700
>
> I'd love a tour also, could we set something up on an evening like
> an open
> house for heatsyncers?
>
>
> --
> Paul Hickey
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/ab2b7f905c11f4c9>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 11:45AM -0700
>
> Chris,
> I have been suffering from much the same problem, accept that I am even
> farther away, at 43rd and Cactus. But if you are willing to setup a
> 'Heatsync west" I might be able to pull some ...more
> <http://groups.google.com/group/heatsynclabs/msg/f80c281760652b41>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 12:14PM -0700
>
> That sounds awsome
>
> Woodworking I'm probably set I just listed some of the larger pieces
> of equipment I had but I have everything from drill presses to chop
> saws and jigsaws bandsaws routers... But. ...more
> <http://groups.google.com/group/heatsynclabs/msg/51afb653ff3aac08>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 12:15PM -0700
>
> That sounds awesome here's my number 623-256-7491
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/59954af629655c9d>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 12:16PM -0700
>
> That's sounds awesome
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/aced43aceb565f5b>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 12:23PM -0700
>
> I live in Surprize and would love to see something on the west side.
>
> On Monday, October 22, 2012 10:50:22 AM UTC-7, afmanufacturing wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/6a0d28852fb79fb5>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 12:23PM -0700
>
> Just a reminder: This board is publicly viewable/searchable, so
> posting your phone number here may not be wise. </PSA>
> --
> Nate Plamondon
>
>
> On Mon, Oct 22, 2012 at 12:16 PM, afmanufacturing
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/c76de68106210ea3>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:34PM -0700
>
> As far as using the HeatSync name/etc, that would need some
> community/board
> discussion, but we are always supportive of more hackerspaces
> especially in
> places that need them and I definitely want to ...more
> <http://groups.google.com/group/heatsynclabs/msg/a64f9ecb6e7c4dbc>
>
> Robert Bushman <rbb3620...@traxel.com> Oct 22 12:37PM -0700
>
> El Mirage here, which has kept me from being as involved in
> HSL as I would like. I would be very excited about a west side
> branch, and would like to help make it happen however I can.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a04e5f57e996fb49>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 12:45PM -0700
>
> It's an hour and a half for me every time I want to go to Heatsync.
> I do it
> because you guys are the only place in town right now. I would love
> to help
> out in any way I can to promote a "Heatsync ...more
> <http://groups.google.com/group/heatsynclabs/msg/bc0089a7b825a4a1>
>
> Tony Brenke <tony....@gmail.com> Oct 22 12:49PM -0700
>
> A west location would be great. 101 and Northern for me.
> On Oct 22, 2012 12:45 PM, "MIke Syfritt" <aestheti...@gmail.com>
> wrote:
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/2cf125fd78b2d4d0>
>
> Jerry Davis <jda...@gmail.com> Oct 22 01:29PM -0700
>
> this is about 6 miles closer to me than mesa location.
> currently I am here, when I drive my wife to work in scottsdale.
> but on other days ... wouldn't it be great to have the choice to go
> either ...more
> <http://groups.google.com/group/heatsynclabs/msg/eb173aca6d860933>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 01:38PM -0700
>
> Thanks deleted.
>
>
> On Monday, October 22, 2012 12:24:17 PM UTC-7, Nate Plamondon wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a7c192e7e86368d1>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 02:11PM -0700
>
> Huh, I guess I didn't realize you were wanting to open a "Heatsync
> West"...
>
> You should just open a space in general and compete with us :)
>
> THAT would be awesome.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b819f102a20b6db>
>
> Will Bradley <bradle...@gmail.com> Oct 22 02:15PM -0700
>
> Or collaborate! Phoenix is big enough to share :)
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/5a950a084acd2095>
>
> Jerry Davis <jda...@gmail.com> Oct 22 02:17PM -0700
>
> we don't need no stinkin competition!
> I agree with collaboration.
>
>
>
> --
> Licensed Amateur Radio Operator: K7AZJ
> Registered Linux User: 275424
> Arduino programmer
>
> Recursion: (noun): ...more
> <http://groups.google.com/group/heatsynclabs/msg/718eb1abc658dbc0>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 02:25PM -0700
>
> complaboration? collampetiton? a balance of both would be neat.
> --
> Nate Plamondon
>
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b718ad20ac758941>
>
> Chad Stearns <chadst...@gmail.com> Oct 22 02:28PM -0700
>
> Another hackerspace in Phoenix? Sounds awesome!
>
> On Monday, October 22, 2012 10:50:22 AM UTC-7, afmanufacturing wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/f2225b023576b3e5>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 02:28PM -0700
>
> Compete? I'm offering my industrial building and equipment and tools
> and not asking for anything in return.. an hour and a half drive
> from people that live on the west side just doesn't make sense
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/10b493af0ac0289c>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 02:41PM -0700
>
> They meant compete in the fun way. Like challenge eachother to be
> better.
>
> Calling it heatsync would definitely require everyone to get to know
> eachother well and deciding what mission and ...more
> <http://groups.google.com/group/heatsynclabs/msg/e5e1f2b682201ab0>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 03:11PM -0700
>
> Sounds like fun. Name the day and I will try to make time to be
> there. More
> Places, more people, more projects, more fun!
>
>
>
> Mike
>
> On Monday, October 22, 2012 2:41:32 PM UTC-7, Jacob Rosenthal
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/71ed21c2d3a15285>
>
> Ryan Rix <r...@n.rix.si> Oct 22 03:47PM -0700
>
> We've wanted a hackerspace that we could have friendly
> pranking/random nerf
> wars with for years now.
>
> ;)
>
> I'd love to see a west side space open up. I spent 18 years looking
> for one on ...more
> <http://groups.google.com/group/heatsynclabs/msg/471677a24d07c802>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 03:58PM -0700
>
> Oh I totally misread that, LOL in that case everybody knows the west
> side is the best side, LOL and we will prove it by afixing my spare
> CO2 laser tube a top of a sharks head.... that's right sharks
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/3ab5f307dcb1d50a>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 04:05PM -0700
>
> :) -- Sorry, yeah, I meant compete in a good way, like we're buddies and
> drink beer with each other but "compete" to see who can be more
> laser-sharky.
>
> -Ryan
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b9330e7df02b6605>
>
> It's ALIVE! 3D printer's first movements
> <http://groups.google.com/group/heatsynclabs/t/6955d2165f748238>
>
> Jason Robinson <sija...@gmail.com> Oct 22 02:24PM -0700
>
> Check it out!
>
> http://youtu.be/n9wnVLBwDwQ
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/4bfc1635a89ff9d3>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 02:35PM -0700
>
> Congrats guys. See you in the lab again soon I bet :)
>
> On Monday, 22 October 2012 14:24:24 UTC-7, Jason Robinson wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/c23719bcca9c7416>
>
> Jason Robinson <sija...@gmail.com> Oct 22 02:53PM -0700
>
> Ya. And thanks again for your help last time!
>
> Jason
>
> On Monday, October 22, 2012 2:35:59 PM UTC-7, Jacob Rosenthal wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/9c422dd8e54a2a6e>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 03:02PM -0700
>
> Awesome, guys!
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/f44ccaa1fec226c1>
>
> JR <google...@rziha.net> Oct 22 04:05PM -0700
>
> I see you changed the orientation of that block of wood we were
> drilling a
> couple weeks ago.
>
> Congrats on the build.
>
> On Monday, October 22, 2012 2:24:24 PM UTC-7, Jason Robinson wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/701d9c8c1c0b56d2>
>
> Safeway can deliver us soda
> <http://groups.google.com/group/heatsynclabs/t/922e58ab176dc3e4>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:39AM -0700
>
> http://www.safeway.com/ShopStores/Shopping-Help
>
> How much do we usually order? If it's more than $150, the delivery
> charge
> is $3.95.
>
> I say Kalil can frak off. I want coca cola DAMNIT!
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/7251a5f6e8b50da2>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 10:48AM -0700
>
> How much are we currently paying per can? IIRC, it's significantly
> less than 60c. Safeway's 12-packs are $7, or 58c/can.
> --
> Nate Plamondon
>
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/2f0f8be3fec37b83>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:50AM -0700
>
> Errr...can we even compare apples to apples on that, though? Kalil
> doesn't
> sell most of the Sodas we would buy anyway, do they?
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a6a67797a3369ee8>
>
> Matt Shepard <matts...@gmail.com> Oct 22 10:51AM -0700
>
> According to the sheet on the fridge, about $0.36 per can. That's a
> pretty
> good deal, but I wouldn't mind some alternatives if we could keep it
> under
> $0.50
>
> On Monday, October 22, 2012, Nate ...more
> <http://groups.google.com/group/heatsynclabs/msg/a29dbafce8d504ad>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 10:52AM -0700
>
> For the most part they have pretty comparable alternatives.
>
> I typically root for the little/local guy, but Kalil has given us
> pretty routinely bad service. I'm all for finding an alternative,
> but ...more
> <http://groups.google.com/group/heatsynclabs/msg/c0ea5a01548a8419>
>
> Matt Shepard <matts...@gmail.com> Oct 22 10:56AM -0700
>
> You should be able to get $4-5/12pack if you shop around, $7 is
> definitely
> the high end for pricing.
>
> I'd also like some low sugar/ sugar free options, but I know few good
> options exist.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/f581d8a5679be6c8>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:36PM -0700
>
> Are you able to get Safeway to deliver without calling during work
> hours?
> That seems to be the biggest obstacle to ordering from Kalil. (Maybe ask
> Kalil if there are other options via them? Email?) ...more
> <http://groups.google.com/group/heatsynclabs/msg/6fa4b1d84f69e810>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 01:57PM -0700
>
> Looks like safeway is all done online.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/125bce25f85c1bbf>
>
> Austin Kipp <zapki...@gmail.com> Oct 22 02:00PM -0700
>
> We would need to buy a refrigerator that one we have is property of
> Kalil.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/c8eac2b901de5069>
>
> JR <google...@rziha.net> Oct 22 03:30PM -0700
>
> $350 on Craigslist, so not insane but certainly not free.
>
> On Monday, October 22, 2012 2:00:18 PM UTC-7, Austin Kipp wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/6f855fab0c4a03cb>
>
> Selfstarter <http://groups.google.com/group/heatsynclabs/t/7c09e1c9387373d6>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 03:00PM -0700
>
> In light of our recent CNC funding ordeal, I've been keeping an eye
> out for easier solutions. One that's really caught my attention is
> Selfstarter, created by a group whose project was rejected by
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/f79f8fafe6038459>
>
> Jasper Nance <nebar...@gmail.com> Oct 22 03:04PM -0700
>
> I would 100% use this! I am always sort of wary to promise AND
> transfer money before voting on items because the tendancy is to
> just keep
> it anyway even if the goal wasn't reached and the end item ...more
> <http://groups.google.com/group/heatsynclabs/msg/75502d2f2b2e2996>
>
> Will Bradley <bradle...@gmail.com> Oct 22 03:05PM -0700
>
> To be fair, unless you pay HeatSync via cash/check/billpay, your
> PayPal/Square/Dwolla payment gets a reasonable fee taken out already. So
> for the vast majority of donations, the only downside to ...more
> <http://groups.google.com/group/heatsynclabs/msg/495ddfa45f0125d7>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 03:10PM -0700
>
> Thanks for finding this Nate. This is perfect.
>
> -Ryan
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/692cb1ebfc224ec1>
>
> Dale Dougherty from Make visits tomorrow (Tue) Night, 7pm!
> <http://groups.google.com/group/heatsynclabs/t/e6059e185a3c3da9>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 02:49PM -0700
>
> Hey all, we've been contact that Dale Dougherty (co founder Oreilly,
> and
> Founder of Make and Maker faire) will visit us tomorrow at 7ish. I'm
> not
> intending to doll up the lab in any way as we hope ...more
> <http://groups.google.com/group/heatsynclabs/msg/c1dd362322482be9>
>
> Looking fo thermal adhesive
> <http://groups.google.com/group/heatsynclabs/t/589009cb5b4ceafa>
>
> Jason Robinson <sija...@gmail.com> Oct 22 09:05AM -0700
>
> Enough for 12 star base LEDs. They have a 3/4" diameter. So, not much.
>
> On Sunday, October 21, 2012 7:42:03 PM UTC-7, Tim M wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/efc7f5d4f2454d50>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:36AM -0700
>
> Are you *sure* Fry's doesn't sell thermal glue? I'd go down there and
> look, they have got a LOT of things.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/ed947f8700eb63a>
>
> Jason Robinson <sija...@gmail.com> Oct 22 10:55AM -0700
>
> I'll give them a call... Ya, turns out their website was right, but at
> least they will be getting some in about a week.
> Jason
>
>
> On Monday, October 22, 2012 10:36:46 AM UTC-7, Ryan "gibson_"
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/15ea41f9f3c21cfc>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 12:02PM -0700
>
> Jason, just to make sure i understand. You are looking for a glue or
> adhesive, like a special thermally conductive epoxy, not the thermal
> paste
> used between a CPU and its cooler? Staples claims to ...more
> <http://groups.google.com/group/heatsynclabs/msg/27810129bff9e2d9>
>
> Jason Robinson <sija...@gmail.com> Oct 22 12:23PM -0700
>
> Ya, you're right. If I had another way to secure them then thermal
> paste,
> which I already have, would suffice. They are going to be placed on a
> metal sheet to dissipate heat. I was going to ...more
> <http://groups.google.com/group/heatsynclabs/msg/3a0f578f013f245d>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 02:26PM -0700
>
> Yes, you could use something for fixing cracks in Franklin stoves, or
> fireplaces. That you can probably get at ACE Hardware, Home Depot,
> Lowes,
> but will likely come in black, black, and black. ...more
> <http://groups.google.com/group/heatsynclabs/msg/6ef8c83a8313afd6>
>
> Jason Robinson <sija...@gmail.com> Oct 22 02:36PM -0700
>
> Thanks, I appreciate the suggestions! Tim M mentioned he might have
> some
> extra so I'll check with him, otherwise I'll just order some. I
> thought I
> needed it immediately, but I might be able to ...more
> <http://groups.google.com/group/heatsynclabs/msg/e6fea1eafea61477>
>
> proposal for Solids Works training and 3D printer/ CNC training,
> whistle/piston motor
> <http://groups.google.com/group/heatsynclabs/t/869a6a787ed5fa06>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 11:07AM -0700
>
> I have a few cnc mills we can use, as well as visual mill 6 for cam
> software(full 3d). I wouldnt mind trying solidworks i use rhino4 or
> alibra
> for cad.
>
> On Saturday, October 20, 2012 1:29:42 ...more
> <http://groups.google.com/group/heatsynclabs/msg/d7c9a2a5efa44c0d>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 11:49AM -0700
>
> I am really looking forward to the toy, plastic piece. But once I
> get the
> files done, I would be happy to email them to you to try on a CNC. I am
> trying to keep the design simple enough to do on a ...more
> <http://groups.google.com/group/heatsynclabs/msg/db7119e8a1f64e24>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:09PM -0700
>
> Where are your CNC mills? We're in the process of buying one ourselves
> (which needs more donations, I believe!)
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/d9f73a17045da310>
>
> Artform <afmanuf...@aol.com> Oct 22 01:51PM -0700
>
> I'm at 5614 n 51st ave see the post about a west side location
>
>
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/99e1c48ae9d1a72a>
>
> Hot Topics Call for Speakers
> <http://groups.google.com/group/heatsynclabs/t/4b40588f9b2a6c40>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 09:30AM -0700
>
> I can talk about rapid prototyping and mold making. Or show off the art
> stuff I have been doing on the laser.
>
>
>
> On Saturday, October 20, 2012 12:26:47 PM UTC-7, Ryan "gibson_" wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/1ea0fb6e902bebe5>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:08AM -0700
>
> Mike: I want to see mold making, that would be awesome :)
>
> So Blaine/Luis - IcedDev
> Mike - Mold Making
>
> Who else? What talks to you want to see? Call people out!
>
> On Mon, Oct 22, 2012 at 9:30 ...more
> <http://groups.google.com/group/heatsynclabs/msg/828a5e299321c8cf>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 10:24AM -0700
>
> Awesome! OK so I will bring stuff I have finished as well and the
> product
> to show the process. How much time do I have?
>
> On Monday, October 22, 2012 10:08:03 AM UTC-7, Ryan "gibson_" wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/9b5852517996f03>
>
> Will Bradley <bradle...@gmail.com> Oct 22 10:25AM -0700
>
> I'd like to hear 5 mins from Trunk about taking ideas from prototype to
> sellable. His inventions seem really cool and practical, and he's
> been able
> to pay the bills with them. What failed or ...more
> <http://groups.google.com/group/heatsynclabs/msg/7b15b66232c0f1d>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:26AM -0700
>
> Try to keep it around 5 minutes, but if you want more time, and your
> topic
> needs it, I don't think anybody would have a problem going over that
> a bit.
> (A 45 minute talk probably wouldn't be fun. ...more
> <http://groups.google.com/group/heatsynclabs/msg/2aa13a983bf7546b>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:27AM -0700
>
> +1.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/92e598b971df9120>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 10:29AM -0700
>
> Well If I have everything ready ahead of time I can keep it around 5
> minutes.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/2c1b9670b820ad70>
>
> Mark Kirschenbaum <tr...@gethypoxic.com> Oct 22 01:34PM -0700
>
> I'm down for anything. That is a great topic and can surely do that.
>
> I don't know if anyone has done 2 before but I think a fun topic is
> to show
> modern day skydiving equipment and demostrate and ...more
> <http://groups.google.com/group/heatsynclabs/msg/1c702603db590bd>
>
> Vector logo for Heatsync
> <http://groups.google.com/group/heatsynclabs/t/9f7fd38e37ae1478>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 09:42AM -0700
>
> Hey guys. I'm heading up there today to cut another Mushroom and the
> rest
> of the Arbitrary arts signs. The bottom of these signs are going to be
> where the name of the artist is -and will also be ...more
> <http://groups.google.com/group/heatsynclabs/msg/e7e6b541bc4bb849>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 09:43AM -0700
>
> http://wiki.heatsynclabs.org/wiki/Press_Kit
> --
> Nate Plamondon
>
>
> On Mon, Oct 22, 2012 at 9:42 AM, MIke Syfritt
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/d7c21cadb5523890>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 10:05AM -0700
>
> That is beautiful. Thanks Nate!
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/4ade7b90948bcf4d>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:24AM -0700
>
> Mike, I think I also pulled the vector out of the PDF linked there so I
> could use it in a laser project a long time ago.
>
> Look around on the laser computer in my folder. "Ryan McDermott" for
> it. ...more
> <http://groups.google.com/group/heatsynclabs/msg/9ab6ddd2135131a5>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 10:26AM -0700
>
> I downloaded the PDF. That was what I was excited about. Thanks for your
> help guys.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/3cb12b700477b77f>
>
> Paul Hickey <paulh...@gmail.com> Oct 22 10:40AM -0700
>
> I also have a different vectorized logo in an svg or something if
> you need
> it.
>
> On Mon, Oct 22, 2012 at 10:26 AM, MIke Syfritt
>
> --
> Paul Hickey
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/bd596ddb2160c2d8>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:36PM -0700
>
> It should all be in the zip :)
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a42c3c350e8df36a>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 12:46PM -0700
>
> I think I have it all covered with the link you gave me Will. Thanks
>
> I'm heading there in a couple hours to work on some stuff unless
> there are
> names on the calender for the laser.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/230d5cb452b6df20>
>
> Use a respirator, idiot
> <http://groups.google.com/group/heatsynclabs/t/b902fd4a99d5deb9>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 11:32AM -0700
>
> Fact: Nikola Tesla did not use a respirator, and he is currently DEAD!
>
> Sharing my own stupidity here for all of your sake:
>
> I was angle grinding some sheet metal the other day, and when I got
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b7cbccdd155dbb73>
>
> Frank Jensen <arc...@gmail.com> Oct 22 11:48AM -0700
>
> Even a cheap paper one is better than nothing especially if you are
> doing
> something that causes large amount of dust or particulate in the air.
>
> On Monday, October 22, 2012 11:32:16 AM UTC-7, Ryan ...more
> <http://groups.google.com/group/heatsynclabs/msg/158ab6e4fd2aba84>
>
> Jasper Nance <nebar...@gmail.com> Oct 22 11:57AM -0700
>
> For fumes even? Particles yes, for fumes you usually need a ducted
> air mask.
>
> And don't ever blow your nose and peek after making black powder...
> OMGBLACKLUNGDISEASE
>
>
> -- ...more
> <http://groups.google.com/group/heatsynclabs/msg/7ddaf2417f36cb42>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 12:01PM -0700
>
> Okay, fumes was the wrong word.
>
> On Oct 22, 2012, at 11:57 AM, Jasper Nance <nebar...@gmail.com> wrote:
>
> For fumes even? Particles yes, for fumes you usually need a ducted
> air mask.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/9943ab0abe583f32>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:08PM -0700
>
> Borrow a fan or something even for stuff like acetone, too. Stuff is
> nasty
> if you let its fumes hang around your face.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/62602877d6923022>
>
> Laser Tag or Paintballing?
> <http://groups.google.com/group/heatsynclabs/t/8d2588d9a9feca4d>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 11:22AM -0700
>
> im in !!!!
>
>
> On Friday, October 12, 2012 4:05:00 PM UTC-7, Ingrid Avenda�o wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a1ef62046e502dae>
>
> Anybody in San Tan Valley?
> <http://groups.google.com/group/heatsynclabs/t/862dabe95cd1c380>
>
> Jason Robinson <sija...@gmail.com> Oct 22 11:21AM -0700
>
> I'd like to make more use of the shop, but I'm clear out in San Tan
> Valley.
> Anybody in this area interested in car pooling?
> My crossroads are Ironwood and Ocotillo.
>
> jason
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/2bbe3675a8ee0d80>
>
> HackRF <http://groups.google.com/group/heatsynclabs/t/a848afeff9c85bb5>
>
> Lisa Kachold <lisak...@obnosis.com> Oct 22 10:45AM -0700
>
> Anyone running anything like HackRF?
>
> https://github.com/mossmann/hackrf
>
> If so, what hardware?
>
> Reference: ...more
> <http://groups.google.com/group/heatsynclabs/msg/f720cf70d6daf926>
>
> New to AZ and hackerspace
> <http://groups.google.com/group/heatsynclabs/t/95c4e7501c78f423>
>
> Duane Mathes <sand...@gmail.com> Oct 21 09:18PM -0700
>
> That is perfect, Will, thanks again. I'll be there tomorrow night
> ready to
> rock.
>
> On Sunday, October 21, 2012 8:20:22 PM UTC-7, Will Bradley wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/4b17d1f2dde9f8f6>
>
> Duane Mathes <sand...@gmail.com> Oct 21 09:25PM -0700
>
> I'm on the SDA team, I'm in charge of making everything look pretty.
> Also
> iOS development in Obj-C, and in my downtime I'm in charge of team
> building.
> Maybe I'll meet you tomorrow night, I'm ...more
> <http://groups.google.com/group/heatsynclabs/msg/256fb7b8ebe90b50>
>
> Will Bradley <bradle...@gmail.com> Oct 21 09:46PM -0700
>
> Anyone going to be around willing to help Duane cut stuff?
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/4aee0f074ac768a9>
>
> Duane Mathes <sand...@gmail.com> Oct 21 09:51PM -0700
>
> I can always come another night if tomorrow is too short notice :)
>
> On Sunday, October 21, 2012 9:46:47 PM UTC-7, Will Bradley wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/3ea34d384426af61>
>
> Nate Plamondon <nplam...@gmail.com> Oct 21 10:16PM -0700
>
> I'll be there and happy to help!
>
> --
> Nate Plamondon
> Sent from a tiny on-screen keyboard
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/e907183e0bb20a8f>
>
> Gadget <gadge...@gmail.com> Oct 21 10:44PM -0700
>
> Same here. I should be in the space around 4ish.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/dae7aab805c1f733>
>
> Jason Robinson <sija...@gmail.com> Oct 22 08:36AM -0700
>
> It's a small world.. my Dad also works off of Ocotillo. I believe he
> is in
> a different building though, fab 12.
>
> Jason
>
> On Sunday, October 21, 2012 6:27:48 PM UTC-7, Ingrid Avenda�o wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b963e93b2687f1af>
>
> Duane Mathes <sand...@gmail.com> Oct 22 10:26AM -0700
>
> You guys are champions, thanks a mil. I'll see you around 4:30!
>
> @Jason, small world indeed! Looks like almost everyone works in the
> fabs,
> I'm a software dude though :)
>
> On Monday, October 22, ...more
> <http://groups.google.com/group/heatsynclabs/msg/727eef767163426e>
>
> You received this message because you are subscribed to the Google Group
> heatsynclabs.
> You can post via email <mailto:heatsy...@googlegroups.com>.
> To unsubscribe from this group, send
> <mailto:heatsynclabs...@googlegroups.com> an empty message.
> For more options, visit
> <http://groups.google.com/group/heatsynclabs/topics> this group.
>
> --
>
>
--
Regards,
Vinnie Chapman,
N1LQJ
Sent from my Ubuntu Desktop
7pm. Since the club often uses the lab for radio and other purposes, I
am encouraging all members of the club to attend this safety meeting.
Vinnie
On 10/22/2012 06:31 PM, heatsy...@googlegroups.com wrote:
> Today's Topic Summary
>
> Group: http://groups.google.com/group/heatsynclabs/topics
>
> * Safety Meeting <#group_thread_0> [7 Updates]
> * Actual wishlist link <#group_thread_1> [4 Updates]
> * west side location offer <#group_thread_2> [26 Updates]
> * It's ALIVE! 3D printer's first movements <#group_thread_3> [5 Updates]
> * Safeway can deliver us soda <#group_thread_4> [10 Updates]
> * Selfstarter <#group_thread_5> [4 Updates]
> * Dale Dougherty from Make visits tomorrow (Tue) Night, 7pm!
> <#group_thread_6> [1 Update]
> * Looking fo thermal adhesive <#group_thread_7> [7 Updates]
> * proposal for Solids Works training and 3D printer/ CNC training,
> whistle/piston motor <#group_thread_8> [4 Updates]
> * Hot Topics Call for Speakers <#group_thread_9> [8 Updates]
> * Vector logo for Heatsync <#group_thread_10> [8 Updates]
> * Use a respirator, idiot <#group_thread_11> [5 Updates]
> * Laser Tag or Paintballing? <#group_thread_12> [1 Update]
> * Anybody in San Tan Valley? <#group_thread_13> [1 Update]
> * HackRF <#group_thread_14> [1 Update]
> * New to AZ and hackerspace <#group_thread_15> [8 Updates]
>
> Safety Meeting
> <http://groups.google.com/group/heatsynclabs/t/b617ed737f452184>
>
> Austin Kipp <zapki...@gmail.com> Oct 22 02:34PM -0700
>
> Many of you have safety ideas for the lab. I would love to hear all of
> them. As well as any safety concerns you may have. So I�m holding a
> meeting
> at the lab on Thursday Nov 1, 2012 @ 7:00pm. ...more
> <http://groups.google.com/group/heatsynclabs/msg/1fdc3875748f96b9>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 02:45PM -0700
>
> Calendered.
>
> On Monday, 22 October 2012 14:34:18 UTC-7, Austin Kipp wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/82863860124a77e1>
>
> Paul Hickey <paulh...@gmail.com> Oct 22 04:14PM -0700
>
> I'm in
>
>
>
> --
> Paul Hickey
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/e31c951990a8fdfe>
>
> Doug Shade <doug....@gmail.com> Oct 22 04:37PM -0700
>
> When first introduced to the lab, I was surprised to see a radial
> arm saw.
> I am an experienced woodworker and perfectly comfortable using this
> tool
> myself... but the thought of anyone else using ...more
> <http://groups.google.com/group/heatsynclabs/msg/a83b83513c0600ba>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 04:46PM -0700
>
> I tend to agree with that sentiment. I've only seen it used twice, and
> both times were, at best, nervewracking for me and the user. An RAS is
> great for the amount of space we have, but it's my ...more
> <http://groups.google.com/group/heatsynclabs/msg/433d3b61931be855>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 04:51PM -0700
>
> Squeeze in a table saw instead? Maybe have someone who is
> comfortable using
> it swap it for a medium sized table saw?
>
> Mike
>
> On Monday, October 22, 2012 4:46:38 PM UTC-7, Nate Plamondon wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/122ad48333c1bff1>
>
> Will Bradley <bradle...@gmail.com> Oct 22 05:46PM -0700
>
> You're supposed to pull the saw out, put the wood in, turn it on,
> and push
> the saw away from you, right? Cutting with the rotation is always
> dangerous
> regardless of tool.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a1e5abd5abc1252d>
>
> Actual wishlist link
> <http://groups.google.com/group/heatsynclabs/t/232919339717b0cf>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 04:06PM -0700
>
> So we received a microsoft webcam today at the lab addressed to
> HeatSync
> Labs Wishlist from L&D Sales and Marketing.
>
> I dont see it as purchased from our amazon wishlist though?
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/9f4c1be947ce115b>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 04:19PM -0700
>
> Sorry, that was me. It's for the 3D printer.
>
> Err, it's to point at the 3D printer so that people can see:
>
> 1) If the printer is in use
> 2) If their long job is complete/failed, if they have left ...more
> <http://groups.google.com/group/heatsynclabs/msg/b6801f04a31e112d>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 04:20PM -0700
>
> its on your box
>
> --
> Jacob Rosenthal
> Sent with Sparrow (http://www.sparrowmailapp.com/?sig)
>
>
> On Monday, October 22, 2012 at 4:19 PM, Ryan Mcdermott wrote:
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/e8c011c6e56be579>
>
> Ryan Rix <r...@n.rix.si> Oct 22 04:59PM -0700
>
> YES YES YES I love you blhack. I was about to buy one.
>
> On Mon 22 October 2012 16:20:03 Jacob Rosenthal wrote:
> > > unattended.
>
> > > -Notrix
>
> > > On Mon, Oct 22, 2012 at 4:06 PM, Jacob Rosenthal ...more
> <http://groups.google.com/group/heatsynclabs/msg/b02e9ffa90185f9e>
>
> west side location offer
> <http://groups.google.com/group/heatsynclabs/t/41766e926148d678>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 10:50AM -0700
>
> Hello,
>
> I use to be a active member back when you where in gangplank, but i
> live on
> the west side. the drive was about a hr or so and soon stopped going. I
> loved the group just the drive was a ...more
> <http://groups.google.com/group/heatsynclabs/msg/9b34e83188fc89f1>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 11:02AM -0700
>
> Chris, I work RIGHT up the street from you, and would LOVE to be able to
> come by and use some of this stuff...
>
> When would be a good time to set up a tour?
>
> On Mon, Oct 22, 2012 at 10:50 AM, ...more
> <http://groups.google.com/group/heatsynclabs/msg/bc6c02d1825e02cb>
>
> Paul Hickey <paulh...@gmail.com> Oct 22 11:06AM -0700
>
> I'd love a tour also, could we set something up on an evening like
> an open
> house for heatsyncers?
>
>
> --
> Paul Hickey
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/ab2b7f905c11f4c9>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 11:45AM -0700
>
> Chris,
> I have been suffering from much the same problem, accept that I am even
> farther away, at 43rd and Cactus. But if you are willing to setup a
> 'Heatsync west" I might be able to pull some ...more
> <http://groups.google.com/group/heatsynclabs/msg/f80c281760652b41>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 12:14PM -0700
>
> That sounds awsome
>
> Woodworking I'm probably set I just listed some of the larger pieces
> of equipment I had but I have everything from drill presses to chop
> saws and jigsaws bandsaws routers... But. ...more
> <http://groups.google.com/group/heatsynclabs/msg/51afb653ff3aac08>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 12:15PM -0700
>
> That sounds awesome here's my number 623-256-7491
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/59954af629655c9d>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 12:16PM -0700
>
> That's sounds awesome
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/aced43aceb565f5b>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 12:23PM -0700
>
> I live in Surprize and would love to see something on the west side.
>
> On Monday, October 22, 2012 10:50:22 AM UTC-7, afmanufacturing wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/6a0d28852fb79fb5>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 12:23PM -0700
>
> Just a reminder: This board is publicly viewable/searchable, so
> posting your phone number here may not be wise. </PSA>
> --
> Nate Plamondon
>
>
> On Mon, Oct 22, 2012 at 12:16 PM, afmanufacturing
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/c76de68106210ea3>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:34PM -0700
>
> As far as using the HeatSync name/etc, that would need some
> community/board
> discussion, but we are always supportive of more hackerspaces
> especially in
> places that need them and I definitely want to ...more
> <http://groups.google.com/group/heatsynclabs/msg/a64f9ecb6e7c4dbc>
>
> Robert Bushman <rbb3620...@traxel.com> Oct 22 12:37PM -0700
>
> El Mirage here, which has kept me from being as involved in
> HSL as I would like. I would be very excited about a west side
> branch, and would like to help make it happen however I can.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a04e5f57e996fb49>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 12:45PM -0700
>
> It's an hour and a half for me every time I want to go to Heatsync.
> I do it
> because you guys are the only place in town right now. I would love
> to help
> out in any way I can to promote a "Heatsync ...more
> <http://groups.google.com/group/heatsynclabs/msg/bc0089a7b825a4a1>
>
> Tony Brenke <tony....@gmail.com> Oct 22 12:49PM -0700
>
> A west location would be great. 101 and Northern for me.
> On Oct 22, 2012 12:45 PM, "MIke Syfritt" <aestheti...@gmail.com>
> wrote:
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/2cf125fd78b2d4d0>
>
> Jerry Davis <jda...@gmail.com> Oct 22 01:29PM -0700
>
> this is about 6 miles closer to me than mesa location.
> currently I am here, when I drive my wife to work in scottsdale.
> but on other days ... wouldn't it be great to have the choice to go
> either ...more
> <http://groups.google.com/group/heatsynclabs/msg/eb173aca6d860933>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 01:38PM -0700
>
> Thanks deleted.
>
>
> On Monday, October 22, 2012 12:24:17 PM UTC-7, Nate Plamondon wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a7c192e7e86368d1>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 02:11PM -0700
>
> Huh, I guess I didn't realize you were wanting to open a "Heatsync
> West"...
>
> You should just open a space in general and compete with us :)
>
> THAT would be awesome.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b819f102a20b6db>
>
> Will Bradley <bradle...@gmail.com> Oct 22 02:15PM -0700
>
> Or collaborate! Phoenix is big enough to share :)
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/5a950a084acd2095>
>
> Jerry Davis <jda...@gmail.com> Oct 22 02:17PM -0700
>
> we don't need no stinkin competition!
> I agree with collaboration.
>
>
>
> --
> Licensed Amateur Radio Operator: K7AZJ
> Registered Linux User: 275424
> Arduino programmer
>
> Recursion: (noun): ...more
> <http://groups.google.com/group/heatsynclabs/msg/718eb1abc658dbc0>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 02:25PM -0700
>
> complaboration? collampetiton? a balance of both would be neat.
> --
> Nate Plamondon
>
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b718ad20ac758941>
>
> Chad Stearns <chadst...@gmail.com> Oct 22 02:28PM -0700
>
> Another hackerspace in Phoenix? Sounds awesome!
>
> On Monday, October 22, 2012 10:50:22 AM UTC-7, afmanufacturing wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/f2225b023576b3e5>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 02:28PM -0700
>
> Compete? I'm offering my industrial building and equipment and tools
> and not asking for anything in return.. an hour and a half drive
> from people that live on the west side just doesn't make sense
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/10b493af0ac0289c>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 02:41PM -0700
>
> They meant compete in the fun way. Like challenge eachother to be
> better.
>
> Calling it heatsync would definitely require everyone to get to know
> eachother well and deciding what mission and ...more
> <http://groups.google.com/group/heatsynclabs/msg/e5e1f2b682201ab0>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 03:11PM -0700
>
> Sounds like fun. Name the day and I will try to make time to be
> there. More
> Places, more people, more projects, more fun!
>
>
>
> Mike
>
> On Monday, October 22, 2012 2:41:32 PM UTC-7, Jacob Rosenthal
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/71ed21c2d3a15285>
>
> Ryan Rix <r...@n.rix.si> Oct 22 03:47PM -0700
>
> We've wanted a hackerspace that we could have friendly
> pranking/random nerf
> wars with for years now.
>
> ;)
>
> I'd love to see a west side space open up. I spent 18 years looking
> for one on ...more
> <http://groups.google.com/group/heatsynclabs/msg/471677a24d07c802>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 03:58PM -0700
>
> Oh I totally misread that, LOL in that case everybody knows the west
> side is the best side, LOL and we will prove it by afixing my spare
> CO2 laser tube a top of a sharks head.... that's right sharks
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/3ab5f307dcb1d50a>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 04:05PM -0700
>
> :) -- Sorry, yeah, I meant compete in a good way, like we're buddies and
> drink beer with each other but "compete" to see who can be more
> laser-sharky.
>
> -Ryan
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b9330e7df02b6605>
>
> It's ALIVE! 3D printer's first movements
> <http://groups.google.com/group/heatsynclabs/t/6955d2165f748238>
>
> Jason Robinson <sija...@gmail.com> Oct 22 02:24PM -0700
>
> Check it out!
>
> http://youtu.be/n9wnVLBwDwQ
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/4bfc1635a89ff9d3>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 02:35PM -0700
>
> Congrats guys. See you in the lab again soon I bet :)
>
> On Monday, 22 October 2012 14:24:24 UTC-7, Jason Robinson wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/c23719bcca9c7416>
>
> Jason Robinson <sija...@gmail.com> Oct 22 02:53PM -0700
>
> Ya. And thanks again for your help last time!
>
> Jason
>
> On Monday, October 22, 2012 2:35:59 PM UTC-7, Jacob Rosenthal wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/9c422dd8e54a2a6e>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 03:02PM -0700
>
> Awesome, guys!
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/f44ccaa1fec226c1>
>
> JR <google...@rziha.net> Oct 22 04:05PM -0700
>
> I see you changed the orientation of that block of wood we were
> drilling a
> couple weeks ago.
>
> Congrats on the build.
>
> On Monday, October 22, 2012 2:24:24 PM UTC-7, Jason Robinson wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/701d9c8c1c0b56d2>
>
> Safeway can deliver us soda
> <http://groups.google.com/group/heatsynclabs/t/922e58ab176dc3e4>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:39AM -0700
>
> http://www.safeway.com/ShopStores/Shopping-Help
>
> How much do we usually order? If it's more than $150, the delivery
> charge
> is $3.95.
>
> I say Kalil can frak off. I want coca cola DAMNIT!
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/7251a5f6e8b50da2>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 10:48AM -0700
>
> How much are we currently paying per can? IIRC, it's significantly
> less than 60c. Safeway's 12-packs are $7, or 58c/can.
> --
> Nate Plamondon
>
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/2f0f8be3fec37b83>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:50AM -0700
>
> Errr...can we even compare apples to apples on that, though? Kalil
> doesn't
> sell most of the Sodas we would buy anyway, do they?
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a6a67797a3369ee8>
>
> Matt Shepard <matts...@gmail.com> Oct 22 10:51AM -0700
>
> According to the sheet on the fridge, about $0.36 per can. That's a
> pretty
> good deal, but I wouldn't mind some alternatives if we could keep it
> under
> $0.50
>
> On Monday, October 22, 2012, Nate ...more
> <http://groups.google.com/group/heatsynclabs/msg/a29dbafce8d504ad>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 10:52AM -0700
>
> For the most part they have pretty comparable alternatives.
>
> I typically root for the little/local guy, but Kalil has given us
> pretty routinely bad service. I'm all for finding an alternative,
> but ...more
> <http://groups.google.com/group/heatsynclabs/msg/c0ea5a01548a8419>
>
> Matt Shepard <matts...@gmail.com> Oct 22 10:56AM -0700
>
> You should be able to get $4-5/12pack if you shop around, $7 is
> definitely
> the high end for pricing.
>
> I'd also like some low sugar/ sugar free options, but I know few good
> options exist.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/f581d8a5679be6c8>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:36PM -0700
>
> Are you able to get Safeway to deliver without calling during work
> hours?
> That seems to be the biggest obstacle to ordering from Kalil. (Maybe ask
> Kalil if there are other options via them? Email?) ...more
> <http://groups.google.com/group/heatsynclabs/msg/6fa4b1d84f69e810>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 01:57PM -0700
>
> Looks like safeway is all done online.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/125bce25f85c1bbf>
>
> Austin Kipp <zapki...@gmail.com> Oct 22 02:00PM -0700
>
> We would need to buy a refrigerator that one we have is property of
> Kalil.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/c8eac2b901de5069>
>
> JR <google...@rziha.net> Oct 22 03:30PM -0700
>
> $350 on Craigslist, so not insane but certainly not free.
>
> On Monday, October 22, 2012 2:00:18 PM UTC-7, Austin Kipp wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/6f855fab0c4a03cb>
>
> Selfstarter <http://groups.google.com/group/heatsynclabs/t/7c09e1c9387373d6>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 03:00PM -0700
>
> In light of our recent CNC funding ordeal, I've been keeping an eye
> out for easier solutions. One that's really caught my attention is
> Selfstarter, created by a group whose project was rejected by
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/f79f8fafe6038459>
>
> Jasper Nance <nebar...@gmail.com> Oct 22 03:04PM -0700
>
> I would 100% use this! I am always sort of wary to promise AND
> transfer money before voting on items because the tendancy is to
> just keep
> it anyway even if the goal wasn't reached and the end item ...more
> <http://groups.google.com/group/heatsynclabs/msg/75502d2f2b2e2996>
>
> Will Bradley <bradle...@gmail.com> Oct 22 03:05PM -0700
>
> To be fair, unless you pay HeatSync via cash/check/billpay, your
> PayPal/Square/Dwolla payment gets a reasonable fee taken out already. So
> for the vast majority of donations, the only downside to ...more
> <http://groups.google.com/group/heatsynclabs/msg/495ddfa45f0125d7>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 03:10PM -0700
>
> Thanks for finding this Nate. This is perfect.
>
> -Ryan
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/692cb1ebfc224ec1>
>
> Dale Dougherty from Make visits tomorrow (Tue) Night, 7pm!
> <http://groups.google.com/group/heatsynclabs/t/e6059e185a3c3da9>
>
> Jacob Rosenthal <jakero...@gmail.com> Oct 22 02:49PM -0700
>
> Hey all, we've been contact that Dale Dougherty (co founder Oreilly,
> and
> Founder of Make and Maker faire) will visit us tomorrow at 7ish. I'm
> not
> intending to doll up the lab in any way as we hope ...more
> <http://groups.google.com/group/heatsynclabs/msg/c1dd362322482be9>
>
> Looking fo thermal adhesive
> <http://groups.google.com/group/heatsynclabs/t/589009cb5b4ceafa>
>
> Jason Robinson <sija...@gmail.com> Oct 22 09:05AM -0700
>
> Enough for 12 star base LEDs. They have a 3/4" diameter. So, not much.
>
> On Sunday, October 21, 2012 7:42:03 PM UTC-7, Tim M wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/efc7f5d4f2454d50>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:36AM -0700
>
> Are you *sure* Fry's doesn't sell thermal glue? I'd go down there and
> look, they have got a LOT of things.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/ed947f8700eb63a>
>
> Jason Robinson <sija...@gmail.com> Oct 22 10:55AM -0700
>
> I'll give them a call... Ya, turns out their website was right, but at
> least they will be getting some in about a week.
> Jason
>
>
> On Monday, October 22, 2012 10:36:46 AM UTC-7, Ryan "gibson_"
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/15ea41f9f3c21cfc>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 12:02PM -0700
>
> Jason, just to make sure i understand. You are looking for a glue or
> adhesive, like a special thermally conductive epoxy, not the thermal
> paste
> used between a CPU and its cooler? Staples claims to ...more
> <http://groups.google.com/group/heatsynclabs/msg/27810129bff9e2d9>
>
> Jason Robinson <sija...@gmail.com> Oct 22 12:23PM -0700
>
> Ya, you're right. If I had another way to secure them then thermal
> paste,
> which I already have, would suffice. They are going to be placed on a
> metal sheet to dissipate heat. I was going to ...more
> <http://groups.google.com/group/heatsynclabs/msg/3a0f578f013f245d>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 02:26PM -0700
>
> Yes, you could use something for fixing cracks in Franklin stoves, or
> fireplaces. That you can probably get at ACE Hardware, Home Depot,
> Lowes,
> but will likely come in black, black, and black. ...more
> <http://groups.google.com/group/heatsynclabs/msg/6ef8c83a8313afd6>
>
> Jason Robinson <sija...@gmail.com> Oct 22 02:36PM -0700
>
> Thanks, I appreciate the suggestions! Tim M mentioned he might have
> some
> extra so I'll check with him, otherwise I'll just order some. I
> thought I
> needed it immediately, but I might be able to ...more
> <http://groups.google.com/group/heatsynclabs/msg/e6fea1eafea61477>
>
> proposal for Solids Works training and 3D printer/ CNC training,
> whistle/piston motor
> <http://groups.google.com/group/heatsynclabs/t/869a6a787ed5fa06>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 11:07AM -0700
>
> I have a few cnc mills we can use, as well as visual mill 6 for cam
> software(full 3d). I wouldnt mind trying solidworks i use rhino4 or
> alibra
> for cad.
>
> On Saturday, October 20, 2012 1:29:42 ...more
> <http://groups.google.com/group/heatsynclabs/msg/d7c9a2a5efa44c0d>
>
> Mike Bushroe <mbus...@gmail.com> Oct 22 11:49AM -0700
>
> I am really looking forward to the toy, plastic piece. But once I
> get the
> files done, I would be happy to email them to you to try on a CNC. I am
> trying to keep the design simple enough to do on a ...more
> <http://groups.google.com/group/heatsynclabs/msg/db7119e8a1f64e24>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:09PM -0700
>
> Where are your CNC mills? We're in the process of buying one ourselves
> (which needs more donations, I believe!)
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/d9f73a17045da310>
>
> Artform <afmanuf...@aol.com> Oct 22 01:51PM -0700
>
> I'm at 5614 n 51st ave see the post about a west side location
>
>
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/99e1c48ae9d1a72a>
>
> Hot Topics Call for Speakers
> <http://groups.google.com/group/heatsynclabs/t/4b40588f9b2a6c40>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 09:30AM -0700
>
> I can talk about rapid prototyping and mold making. Or show off the art
> stuff I have been doing on the laser.
>
>
>
> On Saturday, October 20, 2012 12:26:47 PM UTC-7, Ryan "gibson_" wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/1ea0fb6e902bebe5>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:08AM -0700
>
> Mike: I want to see mold making, that would be awesome :)
>
> So Blaine/Luis - IcedDev
> Mike - Mold Making
>
> Who else? What talks to you want to see? Call people out!
>
> On Mon, Oct 22, 2012 at 9:30 ...more
> <http://groups.google.com/group/heatsynclabs/msg/828a5e299321c8cf>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 10:24AM -0700
>
> Awesome! OK so I will bring stuff I have finished as well and the
> product
> to show the process. How much time do I have?
>
> On Monday, October 22, 2012 10:08:03 AM UTC-7, Ryan "gibson_" wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/9b5852517996f03>
>
> Will Bradley <bradle...@gmail.com> Oct 22 10:25AM -0700
>
> I'd like to hear 5 mins from Trunk about taking ideas from prototype to
> sellable. His inventions seem really cool and practical, and he's
> been able
> to pay the bills with them. What failed or ...more
> <http://groups.google.com/group/heatsynclabs/msg/7b15b66232c0f1d>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:26AM -0700
>
> Try to keep it around 5 minutes, but if you want more time, and your
> topic
> needs it, I don't think anybody would have a problem going over that
> a bit.
> (A 45 minute talk probably wouldn't be fun. ...more
> <http://groups.google.com/group/heatsynclabs/msg/2aa13a983bf7546b>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:27AM -0700
>
> +1.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/92e598b971df9120>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 10:29AM -0700
>
> Well If I have everything ready ahead of time I can keep it around 5
> minutes.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/2c1b9670b820ad70>
>
> Mark Kirschenbaum <tr...@gethypoxic.com> Oct 22 01:34PM -0700
>
> I'm down for anything. That is a great topic and can surely do that.
>
> I don't know if anyone has done 2 before but I think a fun topic is
> to show
> modern day skydiving equipment and demostrate and ...more
> <http://groups.google.com/group/heatsynclabs/msg/1c702603db590bd>
>
> Vector logo for Heatsync
> <http://groups.google.com/group/heatsynclabs/t/9f7fd38e37ae1478>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 09:42AM -0700
>
> Hey guys. I'm heading up there today to cut another Mushroom and the
> rest
> of the Arbitrary arts signs. The bottom of these signs are going to be
> where the name of the artist is -and will also be ...more
> <http://groups.google.com/group/heatsynclabs/msg/e7e6b541bc4bb849>
>
> Nate Plamondon <nplam...@gmail.com> Oct 22 09:43AM -0700
>
> http://wiki.heatsynclabs.org/wiki/Press_Kit
> --
> Nate Plamondon
>
>
> On Mon, Oct 22, 2012 at 9:42 AM, MIke Syfritt
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/d7c21cadb5523890>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 10:05AM -0700
>
> That is beautiful. Thanks Nate!
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/4ade7b90948bcf4d>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 10:24AM -0700
>
> Mike, I think I also pulled the vector out of the PDF linked there so I
> could use it in a laser project a long time ago.
>
> Look around on the laser computer in my folder. "Ryan McDermott" for
> it. ...more
> <http://groups.google.com/group/heatsynclabs/msg/9ab6ddd2135131a5>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 10:26AM -0700
>
> I downloaded the PDF. That was what I was excited about. Thanks for your
> help guys.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/3cb12b700477b77f>
>
> Paul Hickey <paulh...@gmail.com> Oct 22 10:40AM -0700
>
> I also have a different vectorized logo in an svg or something if
> you need
> it.
>
> On Mon, Oct 22, 2012 at 10:26 AM, MIke Syfritt
>
> --
> Paul Hickey
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/bd596ddb2160c2d8>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:36PM -0700
>
> It should all be in the zip :)
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a42c3c350e8df36a>
>
> MIke Syfritt <aestheti...@gmail.com> Oct 22 12:46PM -0700
>
> I think I have it all covered with the link you gave me Will. Thanks
>
> I'm heading there in a couple hours to work on some stuff unless
> there are
> names on the calender for the laser.
>
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/230d5cb452b6df20>
>
> Use a respirator, idiot
> <http://groups.google.com/group/heatsynclabs/t/b902fd4a99d5deb9>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 11:32AM -0700
>
> Fact: Nikola Tesla did not use a respirator, and he is currently DEAD!
>
> Sharing my own stupidity here for all of your sake:
>
> I was angle grinding some sheet metal the other day, and when I got
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b7cbccdd155dbb73>
>
> Frank Jensen <arc...@gmail.com> Oct 22 11:48AM -0700
>
> Even a cheap paper one is better than nothing especially if you are
> doing
> something that causes large amount of dust or particulate in the air.
>
> On Monday, October 22, 2012 11:32:16 AM UTC-7, Ryan ...more
> <http://groups.google.com/group/heatsynclabs/msg/158ab6e4fd2aba84>
>
> Jasper Nance <nebar...@gmail.com> Oct 22 11:57AM -0700
>
> For fumes even? Particles yes, for fumes you usually need a ducted
> air mask.
>
> And don't ever blow your nose and peek after making black powder...
> OMGBLACKLUNGDISEASE
>
>
> -- ...more
> <http://groups.google.com/group/heatsynclabs/msg/7ddaf2417f36cb42>
>
> Ryan Mcdermott <blh...@gmail.com> Oct 22 12:01PM -0700
>
> Okay, fumes was the wrong word.
>
> On Oct 22, 2012, at 11:57 AM, Jasper Nance <nebar...@gmail.com> wrote:
>
> For fumes even? Particles yes, for fumes you usually need a ducted
> air mask.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/9943ab0abe583f32>
>
> Will Bradley <bradle...@gmail.com> Oct 22 12:08PM -0700
>
> Borrow a fan or something even for stuff like acetone, too. Stuff is
> nasty
> if you let its fumes hang around your face.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/62602877d6923022>
>
> Laser Tag or Paintballing?
> <http://groups.google.com/group/heatsynclabs/t/8d2588d9a9feca4d>
>
> afmanufacturing <afmanuf...@aol.com> Oct 22 11:22AM -0700
>
> im in !!!!
>
>
> On Friday, October 12, 2012 4:05:00 PM UTC-7, Ingrid Avenda�o wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/a1ef62046e502dae>
>
> Anybody in San Tan Valley?
> <http://groups.google.com/group/heatsynclabs/t/862dabe95cd1c380>
>
> Jason Robinson <sija...@gmail.com> Oct 22 11:21AM -0700
>
> I'd like to make more use of the shop, but I'm clear out in San Tan
> Valley.
> Anybody in this area interested in car pooling?
> My crossroads are Ironwood and Ocotillo.
>
> jason
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/2bbe3675a8ee0d80>
>
> HackRF <http://groups.google.com/group/heatsynclabs/t/a848afeff9c85bb5>
>
> Lisa Kachold <lisak...@obnosis.com> Oct 22 10:45AM -0700
>
> Anyone running anything like HackRF?
>
> https://github.com/mossmann/hackrf
>
> If so, what hardware?
>
> Reference: ...more
> <http://groups.google.com/group/heatsynclabs/msg/f720cf70d6daf926>
>
> New to AZ and hackerspace
> <http://groups.google.com/group/heatsynclabs/t/95c4e7501c78f423>
>
> Duane Mathes <sand...@gmail.com> Oct 21 09:18PM -0700
>
> That is perfect, Will, thanks again. I'll be there tomorrow night
> ready to
> rock.
>
> On Sunday, October 21, 2012 8:20:22 PM UTC-7, Will Bradley wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/4b17d1f2dde9f8f6>
>
> Duane Mathes <sand...@gmail.com> Oct 21 09:25PM -0700
>
> I'm on the SDA team, I'm in charge of making everything look pretty.
> Also
> iOS development in Obj-C, and in my downtime I'm in charge of team
> building.
> Maybe I'll meet you tomorrow night, I'm ...more
> <http://groups.google.com/group/heatsynclabs/msg/256fb7b8ebe90b50>
>
> Will Bradley <bradle...@gmail.com> Oct 21 09:46PM -0700
>
> Anyone going to be around willing to help Duane cut stuff?
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/4aee0f074ac768a9>
>
> Duane Mathes <sand...@gmail.com> Oct 21 09:51PM -0700
>
> I can always come another night if tomorrow is too short notice :)
>
> On Sunday, October 21, 2012 9:46:47 PM UTC-7, Will Bradley wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/3ea34d384426af61>
>
> Nate Plamondon <nplam...@gmail.com> Oct 21 10:16PM -0700
>
> I'll be there and happy to help!
>
> --
> Nate Plamondon
> Sent from a tiny on-screen keyboard
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/e907183e0bb20a8f>
>
> Gadget <gadge...@gmail.com> Oct 21 10:44PM -0700
>
> Same here. I should be in the space around 4ish.
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/dae7aab805c1f733>
>
> Jason Robinson <sija...@gmail.com> Oct 22 08:36AM -0700
>
> It's a small world.. my Dad also works off of Ocotillo. I believe he
> is in
> a different building though, fab 12.
>
> Jason
>
> On Sunday, October 21, 2012 6:27:48 PM UTC-7, Ingrid Avenda�o wrote:
> ...more
> <http://groups.google.com/group/heatsynclabs/msg/b963e93b2687f1af>
>
> Duane Mathes <sand...@gmail.com> Oct 22 10:26AM -0700
>
> You guys are champions, thanks a mil. I'll see you around 4:30!
>
> @Jason, small world indeed! Looks like almost everyone works in the
> fabs,
> I'm a software dude though :)
>
> On Monday, October 22, ...more
> <http://groups.google.com/group/heatsynclabs/msg/727eef767163426e>
>
> You received this message because you are subscribed to the Google Group
> heatsynclabs.
> You can post via email <mailto:heatsy...@googlegroups.com>.
> To unsubscribe from this group, send
> <mailto:heatsynclabs...@googlegroups.com> an empty message.
> For more options, visit
> <http://groups.google.com/group/heatsynclabs/topics> this group.
>
> --
>
>
--
Regards,
Vinnie Chapman,
N1LQJ
Sent from my Ubuntu Desktop
Reply all
Reply to author
Forward
0 new messages