Fwd: Re[2]: [PTGui] Is straightening the horizon for Xiamo Misphere supported?
62 views
Skip to first unread message
ulrich....@posteo.de
Dec 20, 2023, 1:58:29 PM12/20/23
to pt...@googlegroups.com
Hi Joost,
straightening of DNG images from Misphere is working fine, that's great.
In the meantime I bought an Insta360 X3 but unfortunately straightening
of DNG images from this camera is not yet working in PTGui V12. Am I
doing anything wrong or is it not yet supported? Do I have to switch the
gyro info on in the camera?
-------- Originalnachricht --------
Betreff: Re[2]: [PTGui] Is straightening the horizon for Xiamo Misphere
supported?
Datum: 05.12.2023 09:43
Von: "Ulrich Bangert" <ulrich....@posteo.de>
An: pt...@googlegroups.com
Hi Joost,
thanks for this info, that's a pro for buying the X3 and upgrading to
V12.
Best regards, Ulrich
------ Originalnachricht ------
Von "'PTGui Support' via PTGui Support" <pt...@googlegroups.com>
An pt...@googlegroups.com
Datum 04.12.2023 10:24:39
Betreff Re: [PTGui] Is straightening the horizon for Xiamo Misphere
supported?
> Hi Ulrich,
>
> Auto leveling for Misphere DNG images was added to PTGui 12.24.
>
> PTGui can also level Insta360 X3 images, this should work for DNGs as
> well.
>
> Kind regards,
>
> Joost Nieuwenhuijse
> www.ptgui.com
>
> On 03-12-2023 12:08, Ulrich Bangert wrote:
>> Hi Joost,
>> I didn't deal with this subject for a while but resurrected it
>> yesterday.
>> Still unsure if I should keep the Misphere or buy the Insta360 X3.
>>
>> I'm afraid, there will be no support for straightening DNG images from
>> the Misphere?
>>
>> Is there support for straightening DNG images from the X3? I found a
>> few sample photos but was not able to test the straightening feature
>> with PTGui V12 as they were aligned perfectly already.
>>
>> Best regards, Ulrich
>>
>>
>> ------ Originalnachricht ------
>> Von "'PTGui Support' via PTGui Support" <pt...@googlegroups.com>
>> An pt...@googlegroups.com
>> Datum 28.09.2023 13:23:03
>> Betreff Re: [PTGui] Is straightening the horizon for Xiamo Misphere
>> supported?
>>
>>> Hi Ulrich,
>>>
>>> Thanks for the files, I'll take a look.
>>>
>>> Kind regards,
>>>
>>> Joost Nieuwenhuijse
>>> www.ptgui.com
>>>
>>> On 27/09/2023 17:13, ulrich....@posteo.de wrote:
>>>> Hi Joost,
>>>> yes, the camera I own provides raw images in DNG format. You can
>>>> download a sample from here:
>>>> https://ulrichbangert.de/div/ptgui/levelling-ulrich-bangert.zip
>>>>
>>>> However, I'm reflecting about buying a new 360° cam as the image
>>>> quality of the Misphere is not that good and capturing is time
>>>> consuming as bracketing doesn't work in RAW mode. Maybe the Insta360
>>>> X3 might be a good choice.
>>>>
>>>> Best regards, Ulrich
>>>>
>>>> Am 26.09.2023 16:40 schrieb 'PTGui Support' via PTGui Support:
>>>>> Hi Ulrich,
>>>>>
>>>>> It's been awhile, but I thought the MiSphere could only produce
>>>>> jpeg files?
>>>>>
>>>>> In any case I'd be happy to look if you could make your image
>>>>> available for download.
>>>>>
>>>>> Kind regards,
>>>>>
>>>>> Joost Nieuwenhuijse
>>>>> www.ptgui.com
>>>>>
>>>>> On 26-09-2023 16:37, ulrich....@posteo.de wrote:
>>>>>> Hi Joost,
>>>>>> I assumed that everything is fine now, however there is a new
>>>>>> issue: When processing a RAW image in DNG format from the camera
>>>>>> it is not straightened. Is the meta data missing in the image file
>>>>>> or am I doing something wrong?
>>>>>> Thanks in advance and best regards
>>>>>> Ulrich
>>>>>>
>>>>>> ulrich....@posteo.de schrieb am Montag, 25. September 2023 um
>>>>>> 09:50:23 UTC+2:
>>>>>>
>>>>>> Hi Joost and thanks for this info.
>>>>>> I'm gonna install the trial of V12 standard and test this. And
>>>>>> consider upgrading to that version.
>>>>>> Thanks a lot for your excellent support and best regards
>>>>>> Ulrich
>>>>>>
>>>>>> PTGui Support schrieb am Montag, 25. September 2023 um
>>>>>> 09:01:50 UTC+2:
>>>>>>
>>>>>> Hi Ulrich,
>>>>>>
>>>>>> A setting was added for this purpose:
>>>>>>
>>>>>> Project Settings -> Template Behavior -> Preserve original
>>>>>> orientation
>>>>>> of the panorama. There's a tooltip for more information.
>>>>>>
>>>>>> This is available in PTGui Pro since 11.14. The project
>>>>>> settings
>>>>>> were
>>>>>> not available in the standard version of PTGui 11.
>>>>>>
>>>>>> Since version 12 the Project Settings are available in the
>>>>>> standard
>>>>>> version as well (including this setting).
>>>>>>
>>>>>> Kind regards,
>>>>>>
>>>>>> Joost Nieuwenhuijse
>>>>>> www.ptgui.com <http://www.ptgui.com>
>>>>>>
>>>>>> On 25/09/2023 08:46, ulrich....@posteo.de wrote:
>>>>>> > Hi Joost,
>>>>>> > I performed some preprocessing (HDR by use of
>>>>>> Photomatix) and
>>>>>> this way
>>>>>> > the meta data was lost. When I load the initial JPG
>>>>>> file from
>>>>>> the camera
>>>>>> > in PTGui directly, straightening is working perfectly.
>>>>>> However there is
>>>>>> > one issue left: When I apply my template containing
>>>>>> some
>>>>>> control points
>>>>>> > specific to my camera, straightening is lost
>>>>>> completely. If I
>>>>>> do not, I
>>>>>> > get serious stitching errors.
>>>>>> > Is there a way to fix this, keep both, automatic
>>>>>> straightening and
>>>>>> > individual control points?
>>>>>> > Best regards, Ulrich
>>>>>> >
>>>>>> > ulrich....@posteo.de schrieb am Montag, 25. September
>>>>>> 2023 um
>>>>>> 08:09:51
>>>>>> > UTC+2:
>>>>>> >
>>>>>> > Hi Joost,
>>>>>> > many thanks for the quick reply. Thus it should work in
>>>>>> V11.30.
>>>>>> > Unfortunately I didn't mention that I'm using the
>>>>>> *standard
>>>>>> > *version, not Pro. Is this the reason why it doesn't
>>>>>> work for
>>>>>> me?
>>>>>> > If I had to upgrade to V12 Pro the price would be too
>>>>>> high and I
>>>>>> > would stick to straigthening manually.
>>>>>> > Best regards, Ulrich
>>>>>> >
>>>>>> > PTGui Support schrieb am Montag, 25. September 2023 um
>>>>>> 07:56:33 UTC+2:
>>>>>> >
>>>>>> > Hi Ulrich,
>>>>>> >
>>>>>> > It works in PTGui 12 for the test images I have, and
>>>>>> according
>>>>>> > to the
>>>>>> > version history this feature was added in 11.14.
>>>>>> >
>>>>>> > If it doesn't work, feel free to make an image
>>>>>> available. Any
>>>>>> > fixes will
>>>>>> > only land in PTGui 12, not 11 though.
>>>>>> >
>>>>>> > Kind regards,
>>>>>> >
>>>>>> > Joost Nieuwenhuijse
>>>>>> > www.ptgui.com <http://www.ptgui.com>
>>>>>> <http://www.ptgui.com
>>>>>> <http://www.ptgui.com>>
>>>>>> >
>>>>>> > On 25-09-2023 07:29, ulrich....@posteo.de wrote:
>>>>>> > > Dear PTGui experts,
>>>>>> > > Is leveling or straightening the horizon based on
>>>>>> > metadata for Xiamo
>>>>>> > > Misphere supported in any version of PTGui? Currently
>>>>>> I'm
>>>>>> > using V11.30
>>>>>> > > but would consider upgrading if this feature is
>>>>>> available.
>>>>>> > > Best regards, Ulrich
>>>>>> > >
>>>>>> > > --
>>>>>> > > You received this message because you are subscribed
>>>>>> to the
>>>>>> > Google
>>>>>> > > Groups "PTGui Support" group.
>>>>>> > > To unsubscribe from this group and stop receiving
>>>>>> emails from
>>>>>> > it, send
>>>>>> > > an email to ptgui+un...@googlegroups.com
>>>>>> > > <mailto:ptgui+un...@googlegroups.com>.
>>>>>> > > To view this discussion on the web visit
>>>>>> > >
>>>>>> >
>>>>>> https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com>
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com>>
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com?utm_medium=email&utm_source=footer
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com?utm_medium=email&utm_source=footer
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com?utm_medium=email&utm_source=footer>>>.
>>>>>> >
>>>>>> > --
>>>>>> > You received this message because you are subscribed to
>>>>>> the
>>>>>> Google
>>>>>> > Groups "PTGui Support" group.
>>>>>> > To unsubscribe from this group and stop receiving
>>>>>> emails from
>>>>>> it, send
>>>>>> > an email to ptgui+un...@googlegroups.com
>>>>>> > <mailto:ptgui+un...@googlegroups.com>.
>>>>>> > To view this discussion on the web visit
>>>>>> >
>>>>>> https://groups.google.com/d/msgid/ptgui/a1f681ad-2435-468d-83b4-5cec4ec52a86n%40googlegroups.com
>>>>>> <https://groups.google.com/d/msgid/ptgui/a1f681ad-2435-468d-83b4-5cec4ec52a86n%40googlegroups.com>
>>>>>> <https://groups.google.com/d/msgid/ptgui/a1f681ad-2435-468d-83b4-5cec4ec52a86n%40googlegroups.com?utm_medium=email&utm_source=footer
>>>>>> <https://groups.google.com/d/msgid/ptgui/a1f681ad-2435-468d-83b4-5cec4ec52a86n%40googlegroups.com?utm_medium=email&utm_source=footer>>.
>>>>>>
>>>>>> -- You received this message because you are subscribed to the
>>>>>> Google Groups "PTGui Support" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to ptgui+un...@googlegroups.com
>>>>>> <mailto:ptgui+un...@googlegroups.com>.
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/ptgui/44e73a8b-e0d3-4568-a6af-a64cc3ae81b9n%40googlegroups.com
>>>>>> <https://groups.google.com/d/msgid/ptgui/44e73a8b-e0d3-4568-a6af-a64cc3ae81b9n%40googlegroups.com?utm_medium=email&utm_source=footer>.
>>>>
>>>
>>> -- You received this message because you are subscribed to a topic in
>>> the Google Groups "PTGui Support" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/ptgui/-_u70rp7yqo/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> ptgui+un...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/ptgui/ea0121e0-ee0c-c698-8d4b-8d6b5dc0398e%40ptgui.com.
>>
>
> -- You received this message because you are subscribed to a topic in
> the Google Groups "PTGui Support" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/ptgui/-_u70rp7yqo/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> ptgui+un...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/5eead005-38c3-4c74-8c12-3dcdc3d6f519%40ptgui.com.
straightening of DNG images from Misphere is working fine, that's great.
In the meantime I bought an Insta360 X3 but unfortunately straightening
of DNG images from this camera is not yet working in PTGui V12. Am I
doing anything wrong or is it not yet supported? Do I have to switch the
gyro info on in the camera?
-------- Originalnachricht --------
Betreff: Re[2]: [PTGui] Is straightening the horizon for Xiamo Misphere
supported?
Datum: 05.12.2023 09:43
Von: "Ulrich Bangert" <ulrich....@posteo.de>
An: pt...@googlegroups.com
Hi Joost,
thanks for this info, that's a pro for buying the X3 and upgrading to
V12.
Best regards, Ulrich
------ Originalnachricht ------
Von "'PTGui Support' via PTGui Support" <pt...@googlegroups.com>
An pt...@googlegroups.com
Datum 04.12.2023 10:24:39
Betreff Re: [PTGui] Is straightening the horizon for Xiamo Misphere
supported?
> Hi Ulrich,
>
> Auto leveling for Misphere DNG images was added to PTGui 12.24.
>
> PTGui can also level Insta360 X3 images, this should work for DNGs as
> well.
>
> Kind regards,
>
> Joost Nieuwenhuijse
> www.ptgui.com
>
> On 03-12-2023 12:08, Ulrich Bangert wrote:
>> Hi Joost,
>> I didn't deal with this subject for a while but resurrected it
>> yesterday.
>> Still unsure if I should keep the Misphere or buy the Insta360 X3.
>>
>> I'm afraid, there will be no support for straightening DNG images from
>> the Misphere?
>>
>> Is there support for straightening DNG images from the X3? I found a
>> few sample photos but was not able to test the straightening feature
>> with PTGui V12 as they were aligned perfectly already.
>>
>> Best regards, Ulrich
>>
>>
>> ------ Originalnachricht ------
>> Von "'PTGui Support' via PTGui Support" <pt...@googlegroups.com>
>> An pt...@googlegroups.com
>> Datum 28.09.2023 13:23:03
>> Betreff Re: [PTGui] Is straightening the horizon for Xiamo Misphere
>> supported?
>>
>>> Hi Ulrich,
>>>
>>> Thanks for the files, I'll take a look.
>>>
>>> Kind regards,
>>>
>>> Joost Nieuwenhuijse
>>> www.ptgui.com
>>>
>>> On 27/09/2023 17:13, ulrich....@posteo.de wrote:
>>>> Hi Joost,
>>>> yes, the camera I own provides raw images in DNG format. You can
>>>> download a sample from here:
>>>> https://ulrichbangert.de/div/ptgui/levelling-ulrich-bangert.zip
>>>>
>>>> However, I'm reflecting about buying a new 360° cam as the image
>>>> quality of the Misphere is not that good and capturing is time
>>>> consuming as bracketing doesn't work in RAW mode. Maybe the Insta360
>>>> X3 might be a good choice.
>>>>
>>>> Best regards, Ulrich
>>>>
>>>> Am 26.09.2023 16:40 schrieb 'PTGui Support' via PTGui Support:
>>>>> Hi Ulrich,
>>>>>
>>>>> It's been awhile, but I thought the MiSphere could only produce
>>>>> jpeg files?
>>>>>
>>>>> In any case I'd be happy to look if you could make your image
>>>>> available for download.
>>>>>
>>>>> Kind regards,
>>>>>
>>>>> Joost Nieuwenhuijse
>>>>> www.ptgui.com
>>>>>
>>>>> On 26-09-2023 16:37, ulrich....@posteo.de wrote:
>>>>>> Hi Joost,
>>>>>> I assumed that everything is fine now, however there is a new
>>>>>> issue: When processing a RAW image in DNG format from the camera
>>>>>> it is not straightened. Is the meta data missing in the image file
>>>>>> or am I doing something wrong?
>>>>>> Thanks in advance and best regards
>>>>>> Ulrich
>>>>>>
>>>>>> ulrich....@posteo.de schrieb am Montag, 25. September 2023 um
>>>>>> 09:50:23 UTC+2:
>>>>>>
>>>>>> Hi Joost and thanks for this info.
>>>>>> I'm gonna install the trial of V12 standard and test this. And
>>>>>> consider upgrading to that version.
>>>>>> Thanks a lot for your excellent support and best regards
>>>>>> Ulrich
>>>>>>
>>>>>> PTGui Support schrieb am Montag, 25. September 2023 um
>>>>>> 09:01:50 UTC+2:
>>>>>>
>>>>>> Hi Ulrich,
>>>>>>
>>>>>> A setting was added for this purpose:
>>>>>>
>>>>>> Project Settings -> Template Behavior -> Preserve original
>>>>>> orientation
>>>>>> of the panorama. There's a tooltip for more information.
>>>>>>
>>>>>> This is available in PTGui Pro since 11.14. The project
>>>>>> settings
>>>>>> were
>>>>>> not available in the standard version of PTGui 11.
>>>>>>
>>>>>> Since version 12 the Project Settings are available in the
>>>>>> standard
>>>>>> version as well (including this setting).
>>>>>>
>>>>>> Kind regards,
>>>>>>
>>>>>> Joost Nieuwenhuijse
>>>>>> www.ptgui.com <http://www.ptgui.com>
>>>>>>
>>>>>> On 25/09/2023 08:46, ulrich....@posteo.de wrote:
>>>>>> > Hi Joost,
>>>>>> > I performed some preprocessing (HDR by use of
>>>>>> Photomatix) and
>>>>>> this way
>>>>>> > the meta data was lost. When I load the initial JPG
>>>>>> file from
>>>>>> the camera
>>>>>> > in PTGui directly, straightening is working perfectly.
>>>>>> However there is
>>>>>> > one issue left: When I apply my template containing
>>>>>> some
>>>>>> control points
>>>>>> > specific to my camera, straightening is lost
>>>>>> completely. If I
>>>>>> do not, I
>>>>>> > get serious stitching errors.
>>>>>> > Is there a way to fix this, keep both, automatic
>>>>>> straightening and
>>>>>> > individual control points?
>>>>>> > Best regards, Ulrich
>>>>>> >
>>>>>> > ulrich....@posteo.de schrieb am Montag, 25. September
>>>>>> 2023 um
>>>>>> 08:09:51
>>>>>> > UTC+2:
>>>>>> >
>>>>>> > Hi Joost,
>>>>>> > many thanks for the quick reply. Thus it should work in
>>>>>> V11.30.
>>>>>> > Unfortunately I didn't mention that I'm using the
>>>>>> *standard
>>>>>> > *version, not Pro. Is this the reason why it doesn't
>>>>>> work for
>>>>>> me?
>>>>>> > If I had to upgrade to V12 Pro the price would be too
>>>>>> high and I
>>>>>> > would stick to straigthening manually.
>>>>>> > Best regards, Ulrich
>>>>>> >
>>>>>> > PTGui Support schrieb am Montag, 25. September 2023 um
>>>>>> 07:56:33 UTC+2:
>>>>>> >
>>>>>> > Hi Ulrich,
>>>>>> >
>>>>>> > It works in PTGui 12 for the test images I have, and
>>>>>> according
>>>>>> > to the
>>>>>> > version history this feature was added in 11.14.
>>>>>> >
>>>>>> > If it doesn't work, feel free to make an image
>>>>>> available. Any
>>>>>> > fixes will
>>>>>> > only land in PTGui 12, not 11 though.
>>>>>> >
>>>>>> > Kind regards,
>>>>>> >
>>>>>> > Joost Nieuwenhuijse
>>>>>> > www.ptgui.com <http://www.ptgui.com>
>>>>>> <http://www.ptgui.com
>>>>>> <http://www.ptgui.com>>
>>>>>> >
>>>>>> > On 25-09-2023 07:29, ulrich....@posteo.de wrote:
>>>>>> > > Dear PTGui experts,
>>>>>> > > Is leveling or straightening the horizon based on
>>>>>> > metadata for Xiamo
>>>>>> > > Misphere supported in any version of PTGui? Currently
>>>>>> I'm
>>>>>> > using V11.30
>>>>>> > > but would consider upgrading if this feature is
>>>>>> available.
>>>>>> > > Best regards, Ulrich
>>>>>> > >
>>>>>> > > --
>>>>>> > > You received this message because you are subscribed
>>>>>> to the
>>>>>> > > Groups "PTGui Support" group.
>>>>>> > > To unsubscribe from this group and stop receiving
>>>>>> emails from
>>>>>> > it, send
>>>>>> > > an email to ptgui+un...@googlegroups.com
>>>>>> > > <mailto:ptgui+un...@googlegroups.com>.
>>>>>> > > To view this discussion on the web visit
>>>>>> > >
>>>>>> >
>>>>>> https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com>
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com>>
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com?utm_medium=email&utm_source=footer
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com?utm_medium=email&utm_source=footer
>>>>>> <https://groups.google.com/d/msgid/ptgui/5124dbb6-163a-435a-9275-af9f6a4f7777n%40googlegroups.com?utm_medium=email&utm_source=footer>>>.
>>>>>> >
>>>>>> > --
>>>>>> > You received this message because you are subscribed to
>>>>>> the
>>>>>> > Groups "PTGui Support" group.
>>>>>> > To unsubscribe from this group and stop receiving
>>>>>> emails from
>>>>>> it, send
>>>>>> > an email to ptgui+un...@googlegroups.com
>>>>>> > <mailto:ptgui+un...@googlegroups.com>.
>>>>>> > To view this discussion on the web visit
>>>>>> >
>>>>>> https://groups.google.com/d/msgid/ptgui/a1f681ad-2435-468d-83b4-5cec4ec52a86n%40googlegroups.com
>>>>>> <https://groups.google.com/d/msgid/ptgui/a1f681ad-2435-468d-83b4-5cec4ec52a86n%40googlegroups.com>
>>>>>> <https://groups.google.com/d/msgid/ptgui/a1f681ad-2435-468d-83b4-5cec4ec52a86n%40googlegroups.com?utm_medium=email&utm_source=footer
>>>>>> <https://groups.google.com/d/msgid/ptgui/a1f681ad-2435-468d-83b4-5cec4ec52a86n%40googlegroups.com?utm_medium=email&utm_source=footer>>.
>>>>>>
>>>>>> -- You received this message because you are subscribed to the
>>>>>> Google Groups "PTGui Support" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to ptgui+un...@googlegroups.com
>>>>>> <mailto:ptgui+un...@googlegroups.com>.
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/ptgui/44e73a8b-e0d3-4568-a6af-a64cc3ae81b9n%40googlegroups.com
>>>>>> <https://groups.google.com/d/msgid/ptgui/44e73a8b-e0d3-4568-a6af-a64cc3ae81b9n%40googlegroups.com?utm_medium=email&utm_source=footer>.
>>>>
>>>
>>> -- You received this message because you are subscribed to a topic in
>>> the Google Groups "PTGui Support" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/ptgui/-_u70rp7yqo/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> ptgui+un...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/ptgui/ea0121e0-ee0c-c698-8d4b-8d6b5dc0398e%40ptgui.com.
>>
>
> -- You received this message because you are subscribed to a topic in
> the Google Groups "PTGui Support" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/ptgui/-_u70rp7yqo/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> ptgui+un...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/5eead005-38c3-4c74-8c12-3dcdc3d6f519%40ptgui.com.
PTGui Support
Dec 21, 2023, 2:55:52 AM12/21/23
to pt...@googlegroups.com
Hi Ulrich,
Please let me take a look. Could you make an image available for download?
Please let me take a look. Could you make an image available for download?
Reply all
Reply to author
Forward
0 new messages