--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/6314490d-bcf4-4bd6-a5e0-73c0e6e94007%40googlegroups.com.
My feeders are PL EA 100141096-03
On Mon, Mar 16, 2020 at 7:26 AM Mike M. <mike...@gmail.com> wrote:
--Twin is 520 mm long and abt 100mm hightI made a 3D printed base which can shorten the feeder to abt 420mm
On Monday, 16 March 2020 15:19:14 UTC+1, Mike M. wrote:This are twin feeders;Siemens Siplace ASM Schulz Feeder 2x8 mm :
Mike
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/ad30ffb1-a3d7-4d19-b01c-31839b2b88bb%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/ad30ffb1-a3d7-4d19-b01c-31839b2b88bb%40googlegroups.com.
I thinking to buy them just i need talk about the shipping cost.
So i hope next i week i will have all of them. 😊
Feladó: ope...@googlegroups.com <ope...@googlegroups.com> E személy nevében: Bill Ruckman
Küldve: 2020. március 18., szerda 17:05
Címzett: OpenPnP <ope...@googlegroups.com>
Tárgy: Re: [OpenPnP] Re: Siemens Schultz Feeders with Open Pnp
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/52f2b45c-accb-4ae9-81e0-558c26a90179%40googlegroups.com.
> > https://groups.google.com/d/msgid/openpnp/ad30ffb1-a3d7-4d19-b01c-31839b2b88bb%40googlegroups.com
> > <https://groups.google.com/d/msgid/openpnp/ad30ffb1-a3d7-4d19-b01c-31839b2b88bb%40googlegroups.com?utm_medium=email&utm_source=footer>
> > .
> >
>
> --
> You received this message because you are subscribed to the Google Groups "OpenPnP" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/e16d6969-e0a4-4f6c-a8aa-defe49daa587%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CAE-%3D4Maq2OaikA8igjXJQiVVdRQikGU8%3DnK7FrY8PCZ-7QYGOA%40mail.gmail.com.
Hope so too.
I just bought them.
Next week i will get them!
till i want to build therest of my machine 😊
Feladó: ope...@googlegroups.com <ope...@googlegroups.com> E személy nevében: Bill Ruckman
Küldve: 2020. március 19., csütörtök 16:30
Címzett: ope...@googlegroups.com
Tárgy: Re: [OpenPnP] Re: Siemens Schultz Feeders with Open Pnp
Balazs, it seems reasonable.
--Bill
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L5-YpGcjQb_ENGXz7Cq3Nn1jgjQERBk4RJz0Oq61m9YJg%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/e16d6969-e0a4-4f6c-a8aa-defe49daa587%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CAE-%3D4Maq2OaikA8igjXJQiVVdRQikGU8%3DnK7FrY8PCZ-7QYGOA%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L5-YpGcjQb_ENGXz7Cq3Nn1jgjQERBk4RJz0Oq61m9YJg%40mail.gmail.com.
You received this message because you are subscribed to a topic in the Google Groups "OpenPnP" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/openpnp/hBWwKGdBlgE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/5bf2c448-ad7e-411c-b299-d8c1eab71601%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CAJkLna8FLZBJCVZsi3SDyUnvFPzYEaBJcYVNnqzZRn_xpthn-A%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L6K5_LndivnWi5rLXS3%3DB2vOzC4u42QHtrAtQktDqH_Ew%40mail.gmail.com.
Bill,
Can you provide some info abot your bottom vision? The camera what is looking up and checking the pieces
I succesfully made some changes and the down looking camera is fine. But the uplooking is not.
I have the more or less the same design. im very intersting about the controll and the look likes of the bottom vision.
Balazs
Feladó: ope...@googlegroups.com <ope...@googlegroups.com> E személy nevében: Bill Ruckman
Küldve: 2020. március 21., szombat 1:54
Címzett: ope...@googlegroups.com
Tárgy: Re: [OpenPnP] Re: Siemens Schultz Feeders with Open Pnp
On Fri, Mar 20, 2020 at 4:49 PM Iceturf <ice...@gmail.com> wrote:
Looks like top notch work there Bill - Those feeders are like wings eh - I'm curious what your machine is like when running. I bet it is really smooth.
On Fri, Mar 20, 2020 at 5:11 PM Bill Ruckman <bil...@gmail.com> wrote:
My machine loaded up with Siemens feeders.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L6K5_LndivnWi5rLXS3%3DB2vOzC4u42QHtrAtQktDqH_Ew%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CAE-%3D4MZnxroimN0%3Didkhufze7n7m%2BQs7AYEdD8eNNTRL_N6h6g%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/01de01d5ff85%24bf031080%243d093180%24%40gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L7M4cWQaNKh9W3rWfDzopfGZPNe4SFAHcq3v9XHWJdEgQ%40mail.gmail.com.
To unsubscribe from this group and all its topics, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/5bf2c448-ad7e-411c-b299-d8c1eab71601%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CAJkLna8FLZBJCVZsi3SDyUnvFPzYEaBJcYVNnqzZRn_xpthn-A%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L6K5_LndivnWi5rLXS3%3DB2vOzC4u42QHtrAtQktDqH_Ew%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/01de01d5ff85%24bf031080%243d093180%24%40gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L7M4cWQaNKh9W3rWfDzopfGZPNe4SFAHcq3v9XHWJdEgQ%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CAE-%3D4MbBVmaUYad8SbUt2e%2BnOtXfNiMxzhchwewRxvK3Bi_MYA%40mail.gmail.com.
How do you know that at the end and the begginig is 100% parallel? Or you just left the openpnp to compensate it?
To unsubscribe from this group and all its topics, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/5bf2c448-ad7e-411c-b299-d8c1eab71601%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CAJkLna8FLZBJCVZsi3SDyUnvFPzYEaBJcYVNnqzZRn_xpthn-A%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L6K5_LndivnWi5rLXS3%3DB2vOzC4u42QHtrAtQktDqH_Ew%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/01de01d5ff85%24bf031080%243d093180%24%40gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L7M4cWQaNKh9W3rWfDzopfGZPNe4SFAHcq3v9XHWJdEgQ%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L7M4cWQaNKh9W3rWfDzopfGZPNe4SFAHcq3v9XHWJdEgQ%40mail.gmail.com.
To unsubscribe from this group and all its topics, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/5bf2c448-ad7e-411c-b299-d8c1eab71601%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CAJkLna8FLZBJCVZsi3SDyUnvFPzYEaBJcYVNnqzZRn_xpthn-A%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L6K5_LndivnWi5rLXS3%3DB2vOzC4u42QHtrAtQktDqH_Ew%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/01de01d5ff85%24bf031080%243d093180%24%40gmail.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CALrF6L7M4cWQaNKh9W3rWfDzopfGZPNe4SFAHcq3v9XHWJdEgQ%40mail.gmail.com.
BullI was experimenting with similar arrangement before I purchased used Keyence CA-DXR3...see enclosed - but I used different 12VDC lights (Cheep Car light..)Mike
BullI was experimenting with similar arrangement before I purchased used Keyence CA-DXR3...see enclosed - but I used different 12VDC lights (Cheep Car light..)Mike
On Sunday, 22 March 2020 05:03:51 UTC+1, Bill Ruckman wrote:
To unsubscribe from this group and all its topics, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/fccb95e8-803a-497a-8743-38c148bf0d03%40googlegroups.com.
Was the Keyence a big step up from your DIY version?
To unsubscribe from this group and all its topics, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/fccb95e8-803a-497a-8743-38c148bf0d03%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/39a11e2d-d065-4a90-b3e5-100d947d884e%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/39a11e2d-d065-4a90-b3e5-100d947d884e%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/ab4e327f-c9f8-4a64-8026-0cf0c52ddf24%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/20200326224703.GE69099%40cicely7.cicely.de.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/95fd007c-20ac-46ef-a973-2b4bdfce082e%40googlegroups.com.
Here is my "Base for Schultz feeders" made out of 6mm Aluminum plateSee enclosedMike
On Wednesday, 18 March 2020 17:32:09 UTC+1, Bernd Walter wrote:FYI, if you need a mount for those feeders.
This is what I use on my machine:
https://www.thingiverse.com/thing:2616380
They might be a bit long for most printers, in which case you have to
modify the design.
On Wed, Mar 18, 2020 at 08:25:09AM -0700, Bill Ruckman wrote:
> That seems like a good price. The one in the picture is -04, which is the
> newest version. They work the same though.
>
> --Bill
>
>
> On Wednesday, March 18, 2020 at 8:14:46 AM UTC-7, Mike M. wrote:
> >
> > Here
> > 1 unit - 2 feeders 50 Eur (25Eur/pc +SH) this look like new but used;
> > https://www.ebay.com/itm/324091582972?ul_noapp=true
> >
> > Mike
> >
> > On Monday, 16 March 2020 16:43:43 UTC+1, Bill Ruckman wrote:
> >>
> >> My feeders are PL EA 1
> >> 00141096-03
> >>
> >>
> >> On Mon, Mar 16, 2020 at 7:26 AM Mike M. <mike...@gmail.com> wrote:
> >>
> >>> Twin is 520 mm long and abt 100mm hight
> >>> I made a 3D printed base which can shorten the feeder to abt 420mm
> >>>
> >>> On Monday, 16 March 2020 15:19:14 UTC+1, Mike M. wrote:
> >>>>
> >>>> This are twin feeders;
> >>>> Siemens Siplace ASM Schulz Feeder 2x8 mm :
> >>>>
> >>>> https://www.ebay.de/itm/Siemens-Siplace-ASM-Schulz-Feeder-2x8-mm/324091584181?_trkparms=aid%3D1110001%26algo%3DSPLICE.SIM%26ao%3D1%26asc%3D225078%26meid%3D85bf9f09dfa04c068fc9ee13372a7ddf%26pid%3D100036%26rk%3D3%26rkt%3D12%26sd%3D324091289897%26itm%3D324091584181%26pmt%3D0%26noa%3D1%26pg%3D2047675&_trksid=p2047675.c100036.m2109
> >>>>
> >>>> Mike
> >>>>
> >>> --
> >>> You received this message because you are subscribed to the Google
> >>> Groups "OpenPnP" group.
> >>> To unsubscribe from this group and stop receiving emails from it, send
> >>> an email to ope...@googlegroups.com.
> >>> To view this discussion on the web visit
> >>>
> >>
>
> --
> You received this message because you are subscribed to the Google Groups "OpenPnP" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.> To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/ad30ffb1-a3d7-4d19-b01c-31839b2b88bb%40googlegroups.com.
--
B.Walter <be...@bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/928d44e6-463a-4622-97fa-8a2c5ba52b15%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CAE-%3D4MZosn8u-w6YJkopjBzv%3DBpjbQTAf-e5-D8d%3Dwo10Y8gvQ%40mail.gmail.com.
The 4 pin connector pinout is:
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/928d44e6-463a-4622-97fa-8a2c5ba52b15%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/41d06808-39de-48ae-92fb-95d19a05c55e%40googlegroups.com.
WoowThats great. Wanna share the design? Maybe i will replace it too.Is this feeder working with Rx tx or just like a switch 1 for 1 side?Balazs
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/41d06808-39de-48ae-92fb-95d19a05c55e%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/ea378147-7157-4db4-bf20-6b1057a10f1b%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/78bfd17e-9fb3-48f7-8037-40ea288ea303n%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/5e5efced-810c-4312-8101-ec14135b8f8an%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/72766aef-dd34-489e-a8dd-d50800d287d8n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/ca984a57-3d02-4c48-8843-e96a670ba8efn%40googlegroups.com.
For those who want to use these feeders with OpenPnP, I have made a interface board to convert Gcode to serial commands to talk to these feeders. It has 20 serial ports, so can support 20 dual lane feeders. It also distributes the 30V power and handles the 30V signaling. The MCU is a Arduino Nano Every. Everything you need to build your own can be found here: https://github.com/bilsef/SchultzControllerFor basic operation, you can use the latest ReferenceAutoFeeder or ReferenceSlotAutoFeeder. Be sure to check the box "Move before feed" in the configuration wizard. There is also a new feeder class in the works specifically for these feeders. It adds a lot of functionality, like reading the feeder ID from EEPROM, change pitch from GUI, get feeder status, read and clear feed count. The slot version is especially well suited to these feeders. With it, you can swap feeders in and out of the machine and it will use the ID to know what feeder is installed where and what part is loaded in the feeder.
On Wednesday, March 18, 2020 at 8:25:10 AM UTC-7, Bill Ruckman wrote:
That seems like a good price. The one in the picture is -04, which is the newest version. They work the same though.--Bill
On Wednesday, March 18, 2020 at 8:14:46 AM UTC-7, Mike M. wrote:
Here1 unit - 2 feeders 50 Eur (25Eur/pc +SH) this look like new but used;Mike
On Monday, 16 March 2020 16:43:43 UTC+1, Bill Ruckman wrote:
My feeders are PL EA 100141096-03
On Mon, Mar 16, 2020 at 7:26 AM Mike M. <mike...@gmail.com> wrote:
Twin is 520 mm long and abt 100mm hightI made a 3D printed base which can shorten the feeder to abt 420mm
On Monday, 16 March 2020 15:19:14 UTC+1, Mike M. wrote:
This are twin feeders;Siemens Siplace ASM Schulz Feeder 2x8 mm :
Mike
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/6314490d-bcf4-4bd6-a5e0-73c0e6e94007%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/6617b0c0-6682-4451-affa-fd38d3a94286n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/31f7c58c-0819-4bc9-bf7e-acb35bada7abn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/accd934e-501d-4203-be7b-931f920ab807n%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/84492864-1297-46d9-8a5f-ff56db5534b2n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/ebe03de1-4c08-491b-97df-e97c9b8011ecn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/158b5e22-30ab-4fd7-b3c3-5a5bdd2179a3n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/f54f1847-c874-4d2e-a6d3-fe8b754ebf88n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/dcc48ced-f47a-42db-a215-e029e375bdfen%40googlegroups.com.
<command head-mountable-id="ACT1602366696952" type="ACTUATOR_READ_REGEX">
<text><![CDATA[<text><![CDATA[^ok.*ID: (?<Value>.+)]]></text>]]></text>
</command>
<command head-mountable-id="ACT1602366696952" type="ACTUATOR_READ_WITH_DOUBLE_COMMAND">
<text><![CDATA[<text><![CDATA[M610N{IntegerValue}]]></text>]]></text>
</command>
<command head-mountable-id="ACT1602365219913" type="ACTUATOR_READ_WITH_DOUBLE_COMMAND">
<text><![CDATA[<text><![CDATA[M610N{IntegerValue}]]></text>]]></text>
</command>
<command head-mountable-id="ACT1602365219913" type="ACTUATOR_READ_REGEX">
<text><![CDATA[<text><![CDATA[^ok.*ID: (?<Value>.+)]]></text>]]></text>
</command>
<command head-mountable-id="ACT1602367360967" type="ACTUATE_DOUBLE_COMMAND">
<text><![CDATA[<text><![CDATA[M600N{IntegerValue}]]></text>]]></text>
</command>
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/dcc48ced-f47a-42db-a215-e029e375bdfen%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/001b89d2-b049-7ca5-21d9-7eb76bfc4dcc%40gmx.net.
<string>SchultzFeederSlot.banks</string>
<object class="org.openpnp.machine.reference.feeder.SlotSchultzFeeder$BanksProperty">
<banks>
<bank id="BANK-1602364626821" name="BankWest">
<feeders/>
</bank>
</banks>
</object>
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/ae78e904-5b36-41ab-8419-b23daf5f397dn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/2fd3a4c4-354a-4ad3-acf8-4186db78607an%40googlegroups.com.