On my Prusa it took me a while to tweak it to get it printing really good, my mendelmax has required very few tweaks right off the line.
What material? What temp? I've been printing PLA at similar speeds but found the extruder temp had to be raised to 200+ to get a good infill - honeycomb. I print the first layer lower and slower.
Best regards,
Ross Shannon
--
You received this message because you are subscribed to the Google Groups "MendelMax Support" group.
To view this discussion on the web visit https://groups.google.com/d/msg/mendelmax/-/g_31IlY5RY4J.
To post to this group, send email to mend...@googlegroups.com.
To unsubscribe from this group, send email to mendelmax+...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/mendelmax?hl=en.
Wowza, did you added any mechanical updates to get these kind of speeds or just firmware tinkering?
--
You received this message because you are subscribed to the Google Groups "MendelMax Support" group.
To view this discussion on the web visit https://groups.google.com/d/msg/mendelmax/-/YO5hPI_fhF4J.
This is all with stock Marlin firmware maxbots ships in the mendelmax1.5 thingivewrse page. I did nothing to the firmware except for change the esteps for my extruder.Most of the sped comes from months and months of tweaking and tuning the machine itself to keep everything perfectly aligned. I also use borosilicate glass print bed and not the bug aluminium print bed as I think that one is too heavy and will not allow these kinds of speeds.Even though I get less print are IU aqxctually just use a prusa PCB heater and standard prusa sized borosilicate peice of glass at 200x214mm. It weighs soo much less it makes prints faster and better but I lose some print size.The new Y axis we're getting ready top ship will hasve borosilicate ghlass printy beds and no more hrsvy slu plates so will make for a faster Y axis a well.Cheers--Ezra
On Jun 18, 2012, at 2:15 PM, Bill Ruckman wrote:
Ezra,Can you post your configuration.h file, or at least the speed and acceleration portions?Thanks,--Bill
On Mon, Jun 18, 2012 at 6:47 AM, Misha <mbt...@gmail.com> wrote:
Wowza, did you added any mechanical updates to get these kind of speeds or just firmware tinkering?To view this discussion on the web visit https://groups.google.com/d/msg/mendelmax/-/YO5hPI_fhF4J.--
You received this message because you are subscribed to the Google Groups "MendelMax Support" group.
To unsubscribe from this group, send email to mendelmax+unsubscribe@googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "MendelMax Support" group.
To post to this group, send email to mend...@googlegroups.com.
To unsubscribe from this group, send email to mendelmax+unsubscribe@googlegroups.com.
--