Groups
Sign in
Groups
MendelMax Support
Conversations
About
Send feedback
Help
MendelMax Support
Contact owners and managers
1–30 of 1260
Mark all as read
Report group
0 selected
Richard Perry
, …
Andrew Mauldin
13
5/23/18
E3D Hot end?
Just as a followup for anyone interested (I was!) the E3D hot ends are documented pretty well here:
unread,
E3D Hot end?
Just as a followup for anyone interested (I was!) the E3D hot ends are documented pretty well here:
5/23/18
Alex
, …
md apu sarwar
15
4/10/18
Any Marlin pins and g-code for a electronics cooling fan?
Hi All, I know this post are old, However, It would be great if you could answer the question below:
unread,
Any Marlin pins and g-code for a electronics cooling fan?
Hi All, I know this post are old, However, It would be great if you could answer the question below:
4/10/18
Greg. L
, …
Guy Snover
20
8/22/16
Just burned out a RAMBO FET (sigh)
Glad we could help! Sent from my iPhone On Aug 22, 2016, at 3:33 PM, Guy Snover <gsn...@gmail.com
unread,
Just burned out a RAMBO FET (sigh)
Glad we could help! Sent from my iPhone On Aug 22, 2016, at 3:33 PM, Guy Snover <gsn...@gmail.com
8/22/16
Qianqian Fang
,
Mike Payson
4
8/3/16
MendelMax 1.0 extruder
I just wanted to note, that is not an E3D, it is a Chinese "E3D-like object". It looks the
unread,
MendelMax 1.0 extruder
I just wanted to note, that is not an E3D, it is a Chinese "E3D-like object". It looks the
8/3/16
Samotras
,
Triffid Hunter
2
6/29/16
Need advise to solve problem
Have you replaced your Y axis belts with a leadscrew? Perhaps having your Y steps/mm set to 640
unread,
Need advise to solve problem
Have you replaced your Y axis belts with a leadscrew? Perhaps having your Y steps/mm set to 640
6/29/16
james fletcher
,
ekaggrat singh kalsi
2
5/10/16
Rebuilding a MendelMax 1.5 with a Rumba
it is better to use repetier as it is easier to setup. On Tuesday, March 15, 2016 at 8:08:00 PM UTC+8
unread,
Rebuilding a MendelMax 1.5 with a Rumba
it is better to use repetier as it is easier to setup. On Tuesday, March 15, 2016 at 8:08:00 PM UTC+8
5/10/16
Michael Moore
,
Bfisch1983
3
5/10/16
E3D Volcano
Thanks Bill, I just got home from working out of town. I will look into it further. I had the thought
unread,
E3D Volcano
Thanks Bill, I just got home from working out of town. I will look into it further. I had the thought
5/10/16
Philip Schmitt
4/7/16
PLA Issues with E3D and Maxstruder (3mm)
Hello! Been awhile since posting (and printing). I recently had time to upgraded my MM 2.0 (multiple
unread,
PLA Issues with E3D and Maxstruder (3mm)
Hello! Been awhile since posting (and printing). I recently had time to upgraded my MM 2.0 (multiple
4/7/16
Ben Peng
,
Mike Payson
3
4/5/16
MM2 to MM3 upgrade kit - complete BOM?
Oh cheers On Tuesday, April 5, 2016 at 11:55:41 AM UTC+10, Mike Payson wrote: The BoM for the MM3 is
unread,
MM2 to MM3 upgrade kit - complete BOM?
Oh cheers On Tuesday, April 5, 2016 at 11:55:41 AM UTC+10, Mike Payson wrote: The BoM for the MM3 is
4/5/16
T i m
3/8/16
Repetier lockups and funnies.
Hi all, We have been happily using the MM 1.5 we (a mate and I built) for a while now and with hardly
unread,
Repetier lockups and funnies.
Hi all, We have been happily using the MM 1.5 we (a mate and I built) for a while now and with hardly
3/8/16
Richard Davies
, …
misha kriukow
10
3/3/16
Adding a thermocouple extension to RAMBo 1.2
hi, thanks it worked. For those interested: -i plugged in 5v and ground of both thermocouples to pin
unread,
Adding a thermocouple extension to RAMBo 1.2
hi, thanks it worked. For those interested: -i plugged in 5v and ground of both thermocouples to pin
3/3/16
EberleG
, …
Michael Anton
7
2/25/16
MendelMax 1.5 scaling document
Actually some of the supported rails that are used for Kossel printers would work really well on the
unread,
MendelMax 1.5 scaling document
Actually some of the supported rails that are used for Kossel printers would work really well on the
2/25/16
T i m
,
Sean Mitchell
3
2/18/16
Repetier <> Slic3r <> Marlin settings?
<snip> One of the things we noticed when we first setup the printer was that it seemed to '
unread,
Repetier <> Slic3r <> Marlin settings?
<snip> One of the things we noticed when we first setup the printer was that it seemed to '
2/18/16
GrtBaldini
, …
Chris Johnson
5
2/15/16
Looking for setting to make some parts
Don't know if it will help, but I print parts for ABS parts for printers at 243C and bed at 95-
unread,
Looking for setting to make some parts
Don't know if it will help, but I print parts for ABS parts for printers at 243C and bed at 95-
2/15/16
WA Nick
,
GrtBaldini
2
1/22/16
Terrible time keeping bed level
I haven't seen an issue with mine but I have a 12v Mk2a with stationary bolts /nuts to level and
unread,
Terrible time keeping bed level
I haven't seen an issue with mine but I have a 12v Mk2a with stationary bolts /nuts to level and
1/22/16
GrtBaldini
, …
Larry Knopp
11
1/5/16
Back to the beginning......arrrggg
Just an update, the printer didn't like being connected to the new pc I had recently built. Dunno
unread,
Back to the beginning......arrrggg
Just an update, the printer didn't like being connected to the new pc I had recently built. Dunno
1/5/16
Joseph Helmstetter Jr
, …
Michael Anton
14
12/24/15
increasing build dimensions
All good suggestions. I enlarged the rod diameter when I expanded the axes of my MendelMax V1.5. I
unread,
increasing build dimensions
All good suggestions. I enlarged the rod diameter when I expanded the axes of my MendelMax V1.5. I
12/24/15
UK Chris
, …
Larry Knopp
9
12/11/15
Nozzle wear
You too, Chris! And "Master"... LOL Thx Look forward to hearing what you got going on! As
unread,
Nozzle wear
You too, Chris! And "Master"... LOL Thx Look forward to hearing what you got going on! As
12/11/15
Ben Carter
, …
Patrick Chaopricha
4
12/9/15
Fan not working?
Has anyone figured out this problem? I have 24VDC fan with a 24VDC supply as well and sending the
unread,
Fan not working?
Has anyone figured out this problem? I have 24VDC fan with a 24VDC supply as well and sending the
12/9/15
Dennis Young
,
UK Chris
2
11/12/15
LCD problems on MM2, LCD blank, just backlit,
Dennis, Does your LCD have a tiny potentiometer on the back? If so, this is a contrast control. Mine
unread,
LCD problems on MM2, LCD blank, just backlit,
Dennis, Does your LCD have a tiny potentiometer on the back? If so, this is a contrast control. Mine
11/12/15
Dennis Young
,
Michael Anton
3
11/4/15
Bed Heater not getting power
That is a safety feature to prevent the bed from overheating if the thermistor is disconnected. Mike
unread,
Bed Heater not getting power
That is a safety feature to prevent the bed from overheating if the thermistor is disconnected. Mike
11/4/15
TheSniper
, …
Peter Juškovič
15
10/10/15
beginning prints. Im inviting your critism in hopes of getting better prints.
Hello, I sorted this problem out, I upgraded y axsis, beacause my previus axsis was falling apart.
unread,
beginning prints. Im inviting your critism in hopes of getting better prints.
Hello, I sorted this problem out, I upgraded y axsis, beacause my previus axsis was falling apart.
10/10/15
T i m
,
Sean Mitchell
3
9/16/15
Buying from Misumi GmbH from the UK?
On Wednesday, September 16, 2015 at 8:57:24 PM UTC+1, muzik` wrote: When I tried to buy from Misumi
unread,
Buying from Misumi GmbH from the UK?
On Wednesday, September 16, 2015 at 8:57:24 PM UTC+1, muzik` wrote: When I tried to buy from Misumi
9/16/15
Jerry G
, …
Dean
5
9/9/15
Back in the printing game, what's new?!
Actually, e3d does NOT have the same groove mount as aj head, it just looks like it, that's it,
unread,
Back in the printing game, what's new?!
Actually, e3d does NOT have the same groove mount as aj head, it just looks like it, that's it,
9/9/15
Steven DeRose
2
8/23/15
Wiring thermocouples via MakerGeeks board
I should mention that a test sketch that does an analogRead() on A3 and A4 (which have the signal
unread,
Wiring thermocouples via MakerGeeks board
I should mention that a test sketch that does an analogRead() on A3 and A4 (which have the signal
8/23/15
icu___
8/22/15
quick question about the Lower Shaft Mount on Mendelmax 2.0
So today I started assembling my Mendelmax 2.0. I just have a quick question about the Lower Shaft
unread,
quick question about the Lower Shaft Mount on Mendelmax 2.0
So today I started assembling my Mendelmax 2.0. I just have a quick question about the Lower Shaft
8/22/15
T i m
,
Michael Anton
9
8/21/15
MiSUMi parts for MM 1.5 confirmation please.
On Friday, 21 August 2015 05:59:29 UTC+1, Michael Anton wrote: <snip> http://uk.misumi-ec.com/
unread,
MiSUMi parts for MM 1.5 confirmation please.
On Friday, 21 August 2015 05:59:29 UTC+1, Michael Anton wrote: <snip> http://uk.misumi-ec.com/
8/21/15
Patrick Brinton
,
Michael Anton
2
8/10/15
Spoke too soon! Return of the weird hairballs! (pics included this time!)
Do you have a place in the filament path where the filament is not supported? If so, is that where
unread,
Spoke too soon! Return of the weird hairballs! (pics included this time!)
Do you have a place in the filament path where the filament is not supported? If so, is that where
8/10/15
Patrick Brinton
,
Drew
5
8/6/15
Getting better, but now I seem to have an extruder problem
I was not saving the files correctly out of slic3r. For some reason I had got into the habit of
unread,
Getting better, but now I seem to have an extruder problem
I was not saving the files correctly out of slic3r. For some reason I had got into the habit of
8/6/15
Patrick Brinton
, …
Chris Johnson
3
7/30/15
wiring a nozzle heatsink fan
Many of us wire it to the board's inbound 12v connection, for a "always on" connection.
unread,
wiring a nozzle heatsink fan
Many of us wire it to the board's inbound 12v connection, for a "always on" connection.
7/30/15