Skip to first unread message
Benedikt
Nov 28, 2015, 6:32:56 PM11/28/15
to RBW Owners Bunch
I'm selling one White Industries Bottom Bracket. 68 X 108mm JIS square taper. Steel spindle. Made in the USA. It was installed once but never rode on. It has a few ever so slight marks from installation and some Phil Wood grease but otherwise is in excellent condition. Threads are good. I'm selling it because I was misled to believing a 108mm spindle would be fine on this frame (not a Rivendell) when 103 is actually what I needed. I purchased it for $130.00 and I'm asking $100 or best offer. Best bet for payment is Paypal right now. I'm in Seattle.
Here are some pictures - 6 of them - https://www.flickr.com/photos/neutralbuoyancy/22752645234/in/album-72157607896493013/
- Brian
Mark Reimer
Nov 30, 2015, 1:36:51 PM11/30/15
to RBW Owners Bunch
Say... I have a 105mm Phil Wood BB that's never been run, steel spindle. I was told it was a 110 when I bought it. Care to trade?
Benedikt
Nov 30, 2015, 3:21:03 PM11/30/15
to RBW Owners Bunch
l would TOTALLY do that, Mark, if it was a 103mm. Thanks for the offer anyway.
Mark Reimer
Nov 30, 2015, 3:23:17 PM11/30/15
to rbw-owne...@googlegroups.com
Let me double check the length when I'm home in 3-4 hours. There is a chance it might be 103
--
You received this message because you are subscribed to a topic in the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/rbw-owners-bunch/rWx1SCjPr5s/unsubscribe.
To unsubscribe from this group and all its topics, send an email to rbw-owners-bun...@googlegroups.com.
To post to this group, send email to rbw-owne...@googlegroups.com.
Visit this group at http://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.
Mark Reimer
Nov 30, 2015, 5:05:29 PM11/30/15
to RBW Owners Bunch
Bummer, it's a 105mm for sure.
On Monday, November 30, 2015 at 2:23:17 PM UTC-6, Mark Reimer wrote:
Let me double check the length when I'm home in 3-4 hours. There is a chance it might be 103
On Mon, Nov 30, 2015 at 2:21 PM, Benedikt <neutral...@comcast.net> wrote:
l would TOTALLY do that, Mark, if it was a 103mm. Thanks for the offer anyway.
On Monday, November 30, 2015 at 10:36:51 AM UTC-8, Mark Reimer wrote:Say... I have a 105mm Phil Wood BB that's never been run, steel spindle. I was told it was a 110 when I bought it. Care to trade?
On Saturday, November 28, 2015 at 5:32:56 PM UTC-6, Benedikt wrote:I'm selling one White Industries Bottom Bracket. 68 X 108mm JIS square taper. Steel spindle. Made in the USA. It was installed once but never rode on. It has a few ever so slight marks from installation and some Phil Wood grease but otherwise is in excellent condition. Threads are good. I'm selling it because I was misled to believing a 108mm spindle would be fine on this frame (not a Rivendell) when 103 is actually what I needed. I purchased it for $130.00 and I'm asking $100 or best offer. Best bet for payment is Paypal right now. I'm in Seattle.Here are some pictures - 6 of them - https://www.flickr.com/photos/neutralbuoyancy/22752645234/in/album-72157607896493013/- Brian
--
You received this message because you are subscribed to a topic in the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/rbw-owners-bunch/rWx1SCjPr5s/unsubscribe.
To unsubscribe from this group and all its topics, send an email to rbw-owners-bunch+unsubscribe@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Brian Pickart
Nov 30, 2015, 6:00:49 PM11/30/15
to rbw-owne...@googlegroups.com
Grah! Nice try.
On Mon, Nov 30, 2015 at 2:05 PM, Mark Reimer <markn...@gmail.com> wrote:
Bummer, it's a 105mm for sure.
On Monday, November 30, 2015 at 2:23:17 PM UTC-6, Mark Reimer wrote:
Let me double check the length when I'm home in 3-4 hours. There is a chance it might be 103
On Mon, Nov 30, 2015 at 2:21 PM, Benedikt <neutral...@comcast.net> wrote:
l would TOTALLY do that, Mark, if it was a 103mm. Thanks for the offer anyway.
On Monday, November 30, 2015 at 10:36:51 AM UTC-8, Mark Reimer wrote:Say... I have a 105mm Phil Wood BB that's never been run, steel spindle. I was told it was a 110 when I bought it. Care to trade?
On Saturday, November 28, 2015 at 5:32:56 PM UTC-6, Benedikt wrote:I'm selling one White Industries Bottom Bracket. 68 X 108mm JIS square taper. Steel spindle. Made in the USA. It was installed once but never rode on. It has a few ever so slight marks from installation and some Phil Wood grease but otherwise is in excellent condition. Threads are good. I'm selling it because I was misled to believing a 108mm spindle would be fine on this frame (not a Rivendell) when 103 is actually what I needed. I purchased it for $130.00 and I'm asking $100 or best offer. Best bet for payment is Paypal right now. I'm in Seattle.Here are some pictures - 6 of them - https://www.flickr.com/photos/neutralbuoyancy/22752645234/in/album-72157607896493013/- Brian
--
You received this message because you are subscribed to a topic in the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/rbw-owners-bunch/rWx1SCjPr5s/unsubscribe.
To unsubscribe from this group and all its topics, send an email to rbw-owners-bun...@googlegroups.com.
To post to this group, send email to rbw-owne...@googlegroups.com.
Visit this group at http://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to a topic in the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/rbw-owners-bunch/rWx1SCjPr5s/unsubscribe.
To unsubscribe from this group and all its topics, send an email to rbw-owners-bun...@googlegroups.com.
To post to this group, send email to rbw-owne...@googlegroups.com.
EricK
Dec 1, 2015, 4:53:23 AM12/1/15
to RBW Owners Bunch
With the adjustment range of a Phil BB, does 2mm difference even matter?
Brian Pickart
Dec 1, 2015, 5:18:20 AM12/1/15
to rbw-owne...@googlegroups.com
Do they adjust? I was just reading about them with their cartridge cups and thinking about that.
On Tue, Dec 1, 2015 at 1:53 AM, EricK <ebk...@gmail.com> wrote:
With the adjustment range of a Phil BB, does 2mm difference even matter?
Philip Kim
Dec 1, 2015, 8:39:50 AM12/1/15
to RBW Owners Bunch
Mark Reimer
Dec 1, 2015, 11:27:57 AM12/1/15
to RBW Owners Bunch
Right, that is true. I did that with my Phil BB when I bought it for my Atlantis. I needed a 119 but could only find an 'offset' spindle at the time, so I bought that and simply pulled the spindle back to the centre. Took maybe a minute!
Benedikt - if you're interested, send me a DM. This BB has zero miles on it. 105mm, steel JIS spindle.
Reply all
Reply to author
Forward
0 new messages