OK,
Thanks for the update. I have the new H8-H67-H37-H17 board that I need to finish building out… I’ll spend time with that for now and wait for the new board.
Thanks!
Rob
From:
se...@googlegroups.com <
se...@googlegroups.com> On Behalf Of norberto.collado
koyado.com
Sent: Thursday, June 16, 2022 7:18 PM
To: sebhc Google Group <
se...@googlegroups.com>
Subject: Re: [sebhc] Looking for a Z67-IDE+
Rob,
I do not have any more Z67-IDE+ boards. Rather than ordering more boards, I'm focused on enabling the Z67-SDC board which will cost less than the Z67-IDE+ as it uses standard TTL parts.
The Z67-SDC is still in debug as it has a timing issue (it crashes at random, so it is hard to understand what is causing the issue). It is using same code as the Z67-IDE+ on different HW. Terry S. has been helping me to solved this issue. Small progress in the right direction has been made. My setup has a SCSI logic analyzer, SPI logic analyzer, and a scope attached to hopefully find the issue. Also I have attached two laptops to capture proper timing.
In the background, I'm also I'm updating the original Z67-IDE that was used inside the H8 chassis with a newer version. Same design but faster. It is going to be a full-size board. I will be ordering boards soon to check the layout. It will be using the same Z67-IDE+ code on different HW to make it easy to enable.
Thanks,
Norberto
________________________________
From:
se...@googlegroups.com<mailto:
se...@googlegroups.com> <
se...@googlegroups.com<mailto:
se...@googlegroups.com>> on behalf of Rob <
rw...@robhome.com<mailto:
rw...@robhome.com>>
Sent: Thursday, June 16, 2022 4:53 PM
To: SEBHC <
se...@googlegroups.com<mailto:
se...@googlegroups.com>>
Subject: [sebhc] Looking for a Z67-IDE+
I have the original SASI board and the Z67-IDE board, but see that some things require the Z67-IDE+? If so, does anyone have one they can sell me?
I've been away for a few years and just trying to get back up to speed...
Don't worry, I have a TON of questions.
Thanks!
Rob
--
You received this message because you are subscribed to the Google Groups "SEBHC" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
sebhc+un...@googlegroups.com<mailto:
sebhc+un...@googlegroups.com>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/sebhc/39dc6057-262a-4b79-a794-5e407fcd61d7n%40googlegroups.com<
https://groups.google.com/d/msgid/sebhc/39dc6057-262a-4b79-a794-5e407fcd61d7n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to a topic in the Google Groups "SEBHC" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/sebhc/Oi_w7v4PwVY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
sebhc+un...@googlegroups.com<mailto:
sebhc+un...@googlegroups.com>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/sebhc/SN6PR01MB3855F2DB891FC3EF1F03CFC8F7AF9%40SN6PR01MB3855.prod.exchangelabs.com<
https://groups.google.com/d/msgid/sebhc/SN6PR01MB3855F2DB891FC3EF1F03CFC8F7AF9%40SN6PR01MB3855.prod.exchangelabs.com?utm_medium=email&utm_source=footer>.