Gigapixel Cloud align issue
55 views
Skip to first unread message
Alex Preyer
Mar 27, 2023, 5:39:03 AM3/27/23
to PTGui Support
Hi,
I stitched a Gigapixel Panorama with 180 images. Due a fast movement of the clouds PTGUI struggles to stitch it. After using the "align to grid" function it looked much better, but on the right site it getting errors in the sky (clouds). Is there a way to manually correct this.
I really appreciate any hint and help
Alex
PTGui Support
Mar 27, 2023, 6:03:42 AM3/27/23
to pt...@googlegroups.com
Hi Alex,
I don't think there's much you can do about the misalignments in the
clouds. Perhaps you can try moving the images by hand (switch Panorama
Editor to Edit Individual Images mode) to make the breaks less obvious.
It's best to let PTGui ignore any control points in the clouds. You can
do this by unchecking those images in the 'Use Control Points Of:' list
in the Optimizer tab. Then you can at least get the remainder of the
panorama properly aligned.
But perhaps other users may have a better idea?
Kind regards,
Joost Nieuwenhuijse
www.ptgui.com
> AlexGigapixel.jpg
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/5a859137-95b9-412d-954c-2c77686438afn%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/5a859137-95b9-412d-954c-2c77686438afn%40googlegroups.com?utm_medium=email&utm_source=footer>.
I don't think there's much you can do about the misalignments in the
clouds. Perhaps you can try moving the images by hand (switch Panorama
Editor to Edit Individual Images mode) to make the breaks less obvious.
It's best to let PTGui ignore any control points in the clouds. You can
do this by unchecking those images in the 'Use Control Points Of:' list
in the Optimizer tab. Then you can at least get the remainder of the
panorama properly aligned.
But perhaps other users may have a better idea?
Kind regards,
Joost Nieuwenhuijse
www.ptgui.com
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/5a859137-95b9-412d-954c-2c77686438afn%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/5a859137-95b9-412d-954c-2c77686438afn%40googlegroups.com?utm_medium=email&utm_source=footer>.
Message has been deleted
Michał Niedźwiecki
Mar 28, 2023, 7:41:17 AM3/28/23
to pt...@googlegroups.com
I use a different lens (or zoom) to take a series with clouds.
For example, from a tripod I use 200-600mm tele-lens and use 600m for ground and 200m for clouds.
From the Mavic 3 drone I use a tele-camera (161mm and 12MPix) for ground and main camera (24mm and 20MPix) for clouds.
So I have another problems:
1. Hoverwer clouds are easy to upscale but the noise is upscaled too. Topaz Gigapixel AI makes good work. But sometimes it is better to use Denoise AI and upscale by PTGui.
2. I must create control points between photos from the main camera and tele-camera manually because the algorithm rarely finds.
I think PTGui should improve 2. point. I can share a series for tests.
https://nkg-mn.com/gigapixel/bielsko-biala/2023-03-12-kozia_gorka3/ - my latest 120K full spherical gigapixel panorama when I used the mentioned technique. Stitched from >500 photos from tele-camera (-45° to 0°) and a few upscaled photos from main to replenish the clouds and nadir (-90° to -45°).
--
Michał Niedźwiecki
Michał Niedźwiecki
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/b0699234-66e1-a726-8e3a-9a9a3dddc889%40ptgui.com.
PTGui Support
Mar 28, 2023, 7:58:05 AM3/28/23
to pt...@googlegroups.com
Hi Michał,
Sure, please send me your images if you would like me to take a look.
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
Sure, please send me your images if you would like me to take a look.
On 3/27/23 14:23, Michał Niedźwiecki wrote:
> I use a different lens (or zoom) to take a series with clouds.
>
> For example, from a tripod I use 200-600mm tele-lens and use 600m for
> ground and 200m for clouds.
> From the Mavic 3 drone I use a tele-camera (161mm and 12MPix) for
> ground and main camera (24mm and 20MPix) for clouds.
>
> So I have another problems:
>
> 1. Hoverwer clouds are easy to upscale but the noise is upscaled too.
> Topaz Gigapixel AI makes good work. But sometimes it is better to
> use Denoise AI and upscale by PTGui.
> 2. I must create control points between photos from the main camera and
> tele-camera manually because the algorithm rarely finds.
>
> I think PTGui should improve 2. point. I can share a series for tests.
>
> https://nkg-mn.com/gigapixel/bielsko-biala/2023-03-12-kozia_gorka3/
> <https://nkg-mn.com/gigapixel/bielsko-biala/2023-03-12-kozia_gorka3/> -
> my latest 120K full spherical gigapixel panorama when I used the
> mentioned technique. Stitched from >500 photos from tele-camera (-45° to
> 0*°*) and a few upscaled photos from main to replenish the clouds and
> I use a different lens (or zoom) to take a series with clouds.
>
> For example, from a tripod I use 200-600mm tele-lens and use 600m for
> ground and 200m for clouds.
> From the Mavic 3 drone I use a tele-camera (161mm and 12MPix) for
> ground and main camera (24mm and 20MPix) for clouds.
>
> So I have another problems:
>
> 1. Hoverwer clouds are easy to upscale but the noise is upscaled too.
> Topaz Gigapixel AI makes good work. But sometimes it is better to
> use Denoise AI and upscale by PTGui.
> 2. I must create control points between photos from the main camera and
> tele-camera manually because the algorithm rarely finds.
>
> I think PTGui should improve 2. point. I can share a series for tests.
>
> https://nkg-mn.com/gigapixel/bielsko-biala/2023-03-12-kozia_gorka3/
> <https://nkg-mn.com/gigapixel/bielsko-biala/2023-03-12-kozia_gorka3/> -
> my latest 120K full spherical gigapixel panorama when I used the
> mentioned technique. Stitched from >500 photos from tele-camera (-45° to
> nadir (-90° to -45°).
>
>
> --
> Michał Niedźwiecki
>
> pon., 27 mar 2023, 12:03 użytkownik 'PTGui Support' via PTGui Support
> <pt...@googlegroups.com <mailto:pt...@googlegroups.com>> napisał:
>
>
> --
> Michał Niedźwiecki
>
> pon., 27 mar 2023, 12:03 użytkownik 'PTGui Support' via PTGui Support
>
> Hi Alex,
>
> I don't think there's much you can do about the misalignments in the
> clouds. Perhaps you can try moving the images by hand (switch Panorama
> Editor to Edit Individual Images mode) to make the breaks less obvious.
>
> It's best to let PTGui ignore any control points in the clouds. You can
> do this by unchecking those images in the 'Use Control Points Of:' list
> in the Optimizer tab. Then you can at least get the remainder of the
> panorama properly aligned.
>
> But perhaps other users may have a better idea?
>
> Kind regards,
>
> Joost Nieuwenhuijse
> www.ptgui.com <http://www.ptgui.com>
> Hi Alex,
>
> I don't think there's much you can do about the misalignments in the
> clouds. Perhaps you can try moving the images by hand (switch Panorama
> Editor to Edit Individual Images mode) to make the breaks less obvious.
>
> It's best to let PTGui ignore any control points in the clouds. You can
> do this by unchecking those images in the 'Use Control Points Of:' list
> in the Optimizer tab. Then you can at least get the remainder of the
> panorama properly aligned.
>
> But perhaps other users may have a better idea?
>
> Kind regards,
>
> Joost Nieuwenhuijse
>
> On 27/03/2023 11:39, 'Alex Preyer' via PTGui Support wrote:
> > Hi,
> > I stitched a Gigapixel Panorama with 180 images. Due a fast
> movement of
> > the clouds PTGUI struggles to stitch it. After using the "align
> to grid"
> > function it looked much better, but on the right site it getting
> errors
> > in the sky (clouds). Is there a way to manually correct this.
> > I really appreciate any hint and help
> > AlexGigapixel.jpg
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> On 27/03/2023 11:39, 'Alex Preyer' via PTGui Support wrote:
> > Hi,
> > I stitched a Gigapixel Panorama with 180 images. Due a fast
> movement of
> > the clouds PTGUI struggles to stitch it. After using the "align
> to grid"
> > function it looked much better, but on the right site it getting
> errors
> > in the sky (clouds). Is there a way to manually correct this.
> > I really appreciate any hint and help
> > AlexGigapixel.jpg
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/ptgui/5a859137-95b9-412d-954c-2c77686438afn%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/5a859137-95b9-412d-954c-2c77686438afn%40googlegroups.com> <https://groups.google.com/d/msgid/ptgui/5a859137-95b9-412d-954c-2c77686438afn%40googlegroups.com?utm_medium=email&utm_source=footer <https://groups.google.com/d/msgid/ptgui/5a859137-95b9-412d-954c-2c77686438afn%40googlegroups.com?utm_medium=email&utm_source=footer>>.
> >
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>.
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/b0699234-66e1-a726-8e3a-9a9a3dddc889%40ptgui.com <https://groups.google.com/d/msgid/ptgui/b0699234-66e1-a726-8e3a-9a9a3dddc889%40ptgui.com>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/CACm8tcLysOPEbKM2o120TC0qeKs3W0SW5zCz%3DtzR8BZ7qdv8hw%40mail.gmail.com <https://groups.google.com/d/msgid/ptgui/CACm8tcLysOPEbKM2o120TC0qeKs3W0SW5zCz%3DtzR8BZ7qdv8hw%40mail.gmail.com?utm_medium=email&utm_source=footer>.
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
Anhdao Vu
Apr 6, 2023, 2:47:35 AM4/6/23
to PTGui Support
hi,
Click anywhere to show 'Align to Grid'. Can you send me instructions on how to make your photos?
Click anywhere to show 'Align to Grid'. Can you send me instructions on how to make your photos?
Vào lúc 16:39:03 UTC+7 ngày Thứ Hai, 27 tháng 3, 2023, Alex Preyer đã viết:
Reply all
Reply to author
Forward
0 new messages