I use Heekscad/cnc 0.18.0 on Ubuntu 11.04.
I experimented a bit with the drilling operations.
One time i set the drill depth to -8.5(negative!) and since then Heekscnc will crash everytime i
select drilling operations.
The wrong parameter is somewhere stored, but i didn't find where.
I reinstalled Heekscad/cnc .deb and chosed to remove all files. Nothing
happend. It still crash and the wrong parameter is for short time visible.
Can anybody tell me how to reset this parameter?
Should i open an issue at code.google that negative values get braced out?
For your answers thanks in advance.
Pascal
You solved my problem. I had only looked on visible files.
Thank you for the hint.
Pascal
--
You received this message because you are subscribed to the Google Groups "HeeksCAD - Users Mailing List" group.
To view this discussion on the web visit https://groups.google.com/d/msg/heekscad-users/-/7uF9uEikvYYJ.
To post to this group, send email to heeksca...@googlegroups.com.
To unsubscribe from this group, send email to heekscad-user...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/heekscad-users?hl=en.
To view this discussion on the web visit https://groups.google.com/d/msg/heekscad-users/-/8dPPShzB0jUJ.