Should anyone come across this issue in the future, here’s what I found the reason was for the Signal Quality graph not being populated. I had made a change to a weewwx.conf setting following a previous post which indicated that for WeeWX to calculate an average wind direction over the archive period to achieve better wind direction resolution, then record_generation = software needs to be set rather than hardware. The downside to this a[[ears to be that with record_generation set to software, no Signal Quality Data is displayed, at least in my setup.
Hi. Could someone point me in the right direction. I've noticed that the signal quality graph on weewx stopped showing data a few days ago - see attached screen print. All other graphs display as normal. Under the Sensor Status heading the signal quality is shown as N/A. The Vantage console Statistical Diagnostic Screen reports a signal quality % value as normal. I've stopped and restarted the weewx service, but this hasn't helped. Any help would be appreciated. Thanks.
--
You received this message because you are subscribed to a topic in the Google Groups "weewx-user" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/weewx-user/sJTtV84Ukow/unsubscribe.
To unsubscribe from this group and all its topics, send an email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/da8488cc-2fd2-42e1-bbeb-c34c2c7797f3n%40googlegroups.com.