Vantage Signal Quality not reporting

103 views
Skip to first unread message

Alastair L

unread,
May 7, 2021, 5:56:34 AM5/7/21
to weewx-user
Hi. Could someone point me in the right direction. I've noticed that the signal quality graph on weewx stopped showing data a few days ago - see attached screen print.  All other graphs display as normal.  Under the Sensor Status heading the signal quality is shown as N/A. The Vantage console  Statistical Diagnostic Screen reports a signal quality % value as normal.   I've stopped and restarted the weewx service, but this hasn't helped.  Any help would be appreciated. Thanks.
 

SignalQuality.pdf

Alastair

unread,
May 12, 2021, 6:37:06 AM5/12/21
to weewx...@googlegroups.com

Should anyone come across this issue in the future, here’s what I found the reason was for the Signal Quality graph not being populated.  I had made a change to a weewwx.conf setting following a previous post which indicated that for WeeWX to calculate an average wind direction over the archive period to achieve better wind direction resolution, then record_generation = software needs to be set rather than hardware.   The downside to this a[[ears to be that with record_generation set to software, no Signal Quality Data is displayed, at least in my setup.


On Fri, 7 May 2021 at 10:56, Alastair L <ajan...@gmail.com> wrote:
Hi. Could someone point me in the right direction. I've noticed that the signal quality graph on weewx stopped showing data a few days ago - see attached screen print.  All other graphs display as normal.  Under the Sensor Status heading the signal quality is shown as N/A. The Vantage console  Statistical Diagnostic Screen reports a signal quality % value as normal.   I've stopped and restarted the weewx service, but this hasn't helped.  Any help would be appreciated. Thanks.
 

--
You received this message because you are subscribed to a topic in the Google Groups "weewx-user" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/weewx-user/sJTtV84Ukow/unsubscribe.
To unsubscribe from this group and all its topics, send an email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/da8488cc-2fd2-42e1-bbeb-c34c2c7797f3n%40googlegroups.com.
Reply all
Reply to author
Forward
0 new messages