Follow up

[Bob S]

Just to finish up, I ended up getting a recommendation from a Yacht outfitter at my marina. He suggested Hatton Marine on north Lake Union. They were terrific in this repair. On time, knowledgeable, with good communications and a fair price. I recommend them and they will be using them again for my work.

[Kerry Lebel]

Bob which repair are you talking about again?

On Thu, Aug 2, 2012 at 6:54 AM, Bob S <lisc...@gmail.com> wrote:

Just to finish up, I ended up getting a recommendation from a Yacht outfitter at my marina. He suggested Hatton Marine on north Lake Union. They were terrific in this repair. On time, knowledgeable, with good communications and a fair price. I recommend them and they will be using them again for my work.

--
You received this message because you are subscribed to the Google Groups "UnifliteWorld" group.
To view this discussion on the web visit https://groups.google.com/d/msg/unifliteworld/-/0spEilMCfWoJ.
To post to this group, send email to unifli...@googlegroups.com.
To unsubscribe from this group, send email to unifliteworl...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.

[Bob S]

I needed a diesel mechanic for my onan generator. 

[Kerry Lebel]

Do they travel or do you have to go to them Bob?  I live down in Gig Harbor and Lake Union is a long ways by boat. :)

Kerry

--

You received this message because you are subscribed to the Google Groups "UnifliteWorld" group.

To view this discussion on the web visit https://groups.google.com/d/msg/unifliteworld/-/1mMMLU4XAAEJ.

[william bradley]

Bob,

I also have a 7.5kw Ohno genny What did you have done and what were the symptoms? If I may ask. I have replaced the water lift muffler and replaced the water pump impeller. Runs fine. Thank God!

Bill and Liz on What a Life San Francisco 38 convertable

---

Date: Thu, 2 Aug 2012 15:12:56 -0700
From: lisc...@gmail.com
To: unifli...@googlegroups.com
Subject: [UnifliteWorld] Re: Follow up

I needed a diesel mechanic for my onan generator. 

On Thursday, August 2, 2012 6:54:42 AM UTC-7, Bob S wrote:

Just to finish up, I ended up getting a recommendation from a Yacht outfitter at my marina. He suggested Hatton Marine on north Lake Union. They were terrific in this repair. On time, knowledgeable, with good communications and a fair price. I recommend them and they will be using them again for my work.

[Bob S]

I have a 1973 7.5 KW onan which has been a real workhourse. The boats been repowered and I keep waiting for the generator to die. It won't thankfully.  The heat exchanger sprung a tiny leak which dripped on the starter gearing and rusted it into inaction. Turns out the exchanger leak could not be fixed with a new gasket due to pitting so they boiled out the housing and fabricated new ends when they could't find a replacement part. Lets hope that does it.

To unsubscribe from this group, send email to unifliteworld+unsubscribe@googlegroups.com.

[Georgeviking]

Hey guys my 32' ss has sliding glass doors in the back the company was of course from Washington and can't find any trace of them....does anyone know where I can get replacement parts??? The local locksmith was able to make keys for the lock but I could use the sliding screen doors, screen is good dollars are going. This uni is on long Island I know most of you guys are "westies" and there just aren't as many uniflites here, and still haven't seen one with the sliders
Oh she's a 78 if that matters