Wow, Slau! fThat's absolutely true! I was about coming back to inform
the community that nothing seems to change. After applying trim, the
clip was a tiny bit reduced, as the person on the mic was almost
eating the mic. The level of the audio itself is +1, and no matter
what I do it remains the same. Here is where my biggest confusion is:
what would be the set threshold if I want to apply compression to it?
Thanks a lot guys! This medium has really been helpful and I'm so
thankful to belong in it.
Best,
Dammie
On 5/5/20, Slau Halatyn <
slauh...@gmail.com> wrote:
> If your audio is distorted, the Trim plug-in will not repair it. The Trim
> plug-in will simply lower the volume of the distorted sound and it will
> remain distorted. If, however, the audio is going over 0 dB FS because of
> internal processing and the original audio is not distorted, there's still a
> chance to salvage it. It all depends upon whether the original audio is
> clipped. Pre-fader metering will let you know whether the original clip has
> reached 0 dB.
> Slau
>
>
>> On May 5, 2020, at 8:40 AM, Dammie Onafeko <
mindof...@gmail.com>
>> wrote:
>>
>> Thanks Stefan! I get it now. It didn't occur to me that I was
>> repairing the audio. It makes a great deal of sense.
>>
>> Any tips on the parameters? God bless!
>>
>> Best,
>>
>> Dammie
>>
>> On 5/5/20, 'Stefan Albertshauser' via Pro Tools Accessibility
>>>> <mailto:
mindof...@gmail.com>>:
>>>>
>>>> Thanks guys for your 2cents. I found it. And now, I have another
>>>> question and it is this: do I apply the Trim before or after E Q?
>>>> Thanks again.
>>>>
>>>> Best,
>>>>
>>>> Dammie
>>>>
>>>> On 5/4/20, Steve Baskis <
baskis...@gmail.com
>>>> <mailto:
baskis...@gmail.com>> wrote:
>>>>> The trim plug-in is located under other within the plug-ins menu if
>>>>> I’m
>>>>> not
>>>>> mistaken.
>>>>>
>>>>> Respectfully,
>>>>> Steve Baskis
>>>>>
>>>>>> On May 4, 2020, at 20:44, Dammie Onafeko <
mindof...@gmail.com
>>>>>> <mailto:
mindof...@gmail.com>>
>>>>>> wrote:
>>>>>>
>>>>>> Thanks Mike! But I tried Declip and it didn't change anything.
>>>>>> Someone
>>>>>> mentioned the trim to me, but I checked the plugin section in
>>>>>> ProTools
>>>>>> and couldn't find it. Could you tell where exactly where it is in
>>>>>> ProTools? Thanks!
>>>>>>
>>>>>> Best,
>>>>>>
>>>>>> Dammie
>>>>>>
>>>>>>> On 5/4/20, Michael Holmes <
m.richar...@gmail.com
>>>>>>> <mailto:
m.richar...@gmail.com>> wrote:
>>>>>>> I haven’t tried this, but Izotope Elements has a DeClip plugin. I
>>>>>>> believe
>>>>>>> it
>>>>>>> smooths out the hard clip sounds. If the track sounds okay despite
>>>>>>> the
>>>>>>> high
>>>>>>> peak, you could get away with the Pro Tools Trim plugin before EQ
>>>>>>> and
>>>>>>> such.
>>>>>>>
>>>>>>>>> On May 4, 2020, at 18:08, Dammie Onafeko <
mindof...@gmail.com
>>>>>>>>> <mailto:
mindof...@gmail.com>>
>>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Hi guys:
>>>>>>>>
>>>>>>>> I have this audio in a mix that the person on speaking was too
>>>>>>>> close
>>>>>>>> to the mic. The level of audio in the mix is +1. I'm trying to
>>>>>>>> figure
>>>>>>>> out what to do. Anyone has an idea? I'm reading online now, but in
>>>>>>>> the
>>>>>>>> meantime, if you have a solution, I'd very much appreciate it.
>>>>>>>> Thanks!
>>>>>>>>
>>>>>>>> Best,
>>>>>>>>
>>>>>>>> Dammie
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups
>>>>>>>> "Pro Tools Accessibility" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send
>>>>>>>> an
>>>>>>>> email to
ptaccess+u...@googlegroups.com
>>>>>>>> <mailto:
ptaccess+u...@googlegroups.com>.
>>>>>>>> <
https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com>.
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups
>>>>>>> "Pro Tools Accessibility" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send
>>>>>>> an
>>>>>>> email to
ptaccess+u...@googlegroups.com
>>>>>>> <mailto:
ptaccess+u...@googlegroups.com>.
>>>>>>> To view this discussion on the web visit
>>>>>>>
https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com
>>>>>>> <
https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com>.
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups
>>>>>> "Pro Tools Accessibility" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send
>>>>>> an
>>>>>> email to
ptaccess+u...@googlegroups.com
>>>>>> <mailto:
ptaccess+u...@googlegroups.com>.
>>>>>> To view this discussion on the web visit
>>>>>>
https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com
>>>>>> <
https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com>.
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups
>>>>> "Pro Tools Accessibility" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an
>>>>> email to
ptaccess+u...@googlegroups.com
>>>>> <mailto:
ptaccess+u...@googlegroups.com>.
>>>>> To view this discussion on the web visit
>>>>>
https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com
>>>>> <
https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com>.
>>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups
>>>> "Pro Tools Accessibility" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an
>>>> email to
ptaccess+u...@googlegroups.com
>>>> <mailto:
ptaccess+u...@googlegroups.com>.
>>>> To view this discussion on the web visit
>>>>
https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com
>>>> <
https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com>.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an
>>> email to
ptaccess+u...@googlegroups.com
>>> <mailto:
ptaccess+u...@googlegroups.com>.
>>> To view this discussion on the web visit
>>>
https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com
>>> <
https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com>.
>>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to
ptaccess+u...@googlegroups.com
>> <mailto:
ptaccess+u...@googlegroups.com>.
>> To view this discussion on the web visit
>>
https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com
>> <
https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com>.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to
ptaccess+u...@googlegroups.com.
> To view this discussion on the web visit
>
https://groups.google.com/d/msgid/ptaccess/977FE58B-D3C5-469D-BC19-E38E6DBC726D%40gmail.com.
>