Treating a peaking audio
1 view
Skip to first unread message
Dammie Onafeko
May 4, 2020, 6:08:27 PM5/4/20
to ptaccess
Hi guys:
I have this audio in a mix that the person on speaking was too close
to the mic. The level of audio in the mix is +1. I'm trying to figure
out what to do. Anyone has an idea? I'm reading online now, but in the
meantime, if you have a solution, I'd very much appreciate it. Thanks!
Best,
Dammie
I have this audio in a mix that the person on speaking was too close
to the mic. The level of audio in the mix is +1. I'm trying to figure
out what to do. Anyone has an idea? I'm reading online now, but in the
meantime, if you have a solution, I'd very much appreciate it. Thanks!
Best,
Dammie
Michael Holmes
May 4, 2020, 6:45:40 PM5/4/20
to ptac...@googlegroups.com
I haven’t tried this, but Izotope Elements has a DeClip plugin. I believe it smooths out the hard clip sounds. If the track sounds okay despite the high peak, you could get away with the Pro Tools Trim plugin before EQ and such.
> On May 4, 2020, at 18:08, Dammie Onafeko <mindof...@gmail.com> wrote:
>
> Hi guys:
> --
> You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+u...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com.
> On May 4, 2020, at 18:08, Dammie Onafeko <mindof...@gmail.com> wrote:
>
> Hi guys:
> You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+u...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com.
Dammie Onafeko
May 4, 2020, 8:44:53 PM5/4/20
to ptac...@googlegroups.com
Thanks Mike! But I tried Declip and it didn't change anything. Someone
mentioned the trim to me, but I checked the plugin section in ProTools
and couldn't find it. Could you tell where exactly where it is in
ProTools? Thanks!
Best,
Dammie
> https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com.
>
mentioned the trim to me, but I checked the plugin section in ProTools
and couldn't find it. Could you tell where exactly where it is in
ProTools? Thanks!
Best,
Dammie
>
Steve Baskis
May 4, 2020, 8:57:53 PM5/4/20
to ptac...@googlegroups.com
The trim plug-in is located under other within the plug-ins menu if I’m not mistaken.
Respectfully,
Steve Baskis
> On May 4, 2020, at 20:44, Dammie Onafeko <mindof...@gmail.com> wrote:
>
> Thanks Mike! But I tried Declip and it didn't change anything. Someone
> To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com.
Respectfully,
Steve Baskis
> On May 4, 2020, at 20:44, Dammie Onafeko <mindof...@gmail.com> wrote:
>
> Thanks Mike! But I tried Declip and it didn't change anything. Someone
mcdi...@gmail.com
May 4, 2020, 10:18:19 PM5/4/20
to ptac...@googlegroups.com
If it's a sterio track you'll have to look under multi-mono then other and you should find trim.
Best:
Matt
To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com.
Best:
Matt
Dammie Onafeko
May 5, 2020, 7:01:06 AM5/5/20
to ptac...@googlegroups.com
Thanks guys for your 2cents. I found it. And now, I have another
question and it is this: do I apply the Trim before or after E Q?
Thanks again.
Best,
Dammie
> https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com.
>
question and it is this: do I apply the Trim before or after E Q?
Thanks again.
Best,
Dammie
>
Stefan Albertshauser
May 5, 2020, 8:25:32 AM5/5/20
to ptac...@googlegroups.com
I would apply it before the EQ, as you want to work with the repaired signal.
Best Stefan
> To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com.
Best Stefan
Dammie Onafeko
May 5, 2020, 8:41:02 AM5/5/20
to ptac...@googlegroups.com
Thanks Stefan! I get it now. It didn't occur to me that I was
repairing the audio. It makes a great deal of sense.
Any tips on the parameters? God bless!
Best,
Dammie
On 5/5/20, 'Stefan Albertshauser' via Pro Tools Accessibility
> https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com.
>
repairing the audio. It makes a great deal of sense.
Any tips on the parameters? God bless!
Best,
Dammie
On 5/5/20, 'Stefan Albertshauser' via Pro Tools Accessibility
>
Slau Halatyn
May 5, 2020, 9:25:41 AM5/5/20
to PTAccess List
If your audio is distorted, the Trim plug-in will not repair it. The Trim plug-in will simply lower the volume of the distorted sound and it will remain distorted. If, however, the audio is going over 0 dB FS because of internal processing and the original audio is not distorted, there's still a chance to salvage it. It all depends upon whether the original audio is clipped. Pre-fader metering will let you know whether the original clip has reached 0 dB.
Slau
To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com.
Dammie Onafeko
May 5, 2020, 10:10:13 AM5/5/20
to ptac...@googlegroups.com
Wow, Slau! fThat's absolutely true! I was about coming back to inform
the community that nothing seems to change. After applying trim, the
clip was a tiny bit reduced, as the person on the mic was almost
eating the mic. The level of the audio itself is +1, and no matter
what I do it remains the same. Here is where my biggest confusion is:
what would be the set threshold if I want to apply compression to it?
Thanks a lot guys! This medium has really been helpful and I'm so
thankful to belong in it.
Best,
Dammie
On 5/5/20, Slau Halatyn <slauh...@gmail.com> wrote:
> If your audio is distorted, the Trim plug-in will not repair it. The Trim
> plug-in will simply lower the volume of the distorted sound and it will
> remain distorted. If, however, the audio is going over 0 dB FS because of
> internal processing and the original audio is not distorted, there's still a
> chance to salvage it. It all depends upon whether the original audio is
> clipped. Pre-fader metering will let you know whether the original clip has
> reached 0 dB.
> Slau
>
>
>> On May 5, 2020, at 8:40 AM, Dammie Onafeko <mindof...@gmail.com>
>> wrote:
>>
>> Thanks Stefan! I get it now. It didn't occur to me that I was
>> repairing the audio. It makes a great deal of sense.
>>
>> Any tips on the parameters? God bless!
>>
>> Best,
>>
>> Dammie
>>
>> On 5/5/20, 'Stefan Albertshauser' via Pro Tools Accessibility
>>>>>>> <https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com>.
>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com>.
>>>>> <https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com>.
>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com>.
>>> <https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com>.
>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com>.
>
the community that nothing seems to change. After applying trim, the
clip was a tiny bit reduced, as the person on the mic was almost
eating the mic. The level of the audio itself is +1, and no matter
what I do it remains the same. Here is where my biggest confusion is:
what would be the set threshold if I want to apply compression to it?
Thanks a lot guys! This medium has really been helpful and I'm so
thankful to belong in it.
Best,
Dammie
On 5/5/20, Slau Halatyn <slauh...@gmail.com> wrote:
> If your audio is distorted, the Trim plug-in will not repair it. The Trim
> plug-in will simply lower the volume of the distorted sound and it will
> remain distorted. If, however, the audio is going over 0 dB FS because of
> internal processing and the original audio is not distorted, there's still a
> chance to salvage it. It all depends upon whether the original audio is
> clipped. Pre-fader metering will let you know whether the original clip has
> reached 0 dB.
> Slau
>
>
>> On May 5, 2020, at 8:40 AM, Dammie Onafeko <mindof...@gmail.com>
>> wrote:
>>
>> Thanks Stefan! I get it now. It didn't occur to me that I was
>> repairing the audio. It makes a great deal of sense.
>>
>> Any tips on the parameters? God bless!
>>
>> Best,
>>
>> Dammie
>>
>> On 5/5/20, 'Stefan Albertshauser' via Pro Tools Accessibility
>> <ptac...@googlegroups.com <mailto:ptac...@googlegroups.com>> wrote:
>>> I would apply it before the EQ, as you want to work with the repaired
>>> signal.
>>>
>>> Best Stefan
>>>
>>>> Am 05.05.2020 um 13:01 schrieb Dammie Onafeko <mindof...@gmail.com
>>>> <mailto:mindof...@gmail.com>>:
>>> I would apply it before the EQ, as you want to work with the repaired
>>> signal.
>>>
>>> Best Stefan
>>>
>>>> Am 05.05.2020 um 13:01 schrieb Dammie Onafeko <mindof...@gmail.com
>>>>
>>>> Thanks guys for your 2cents. I found it. And now, I have another
>>>> question and it is this: do I apply the Trim before or after E Q?
>>>> Thanks again.
>>>>
>>>> Best,
>>>>
>>>> Dammie
>>>>
>>>> On 5/4/20, Steve Baskis <baskis...@gmail.com
>>>> Thanks guys for your 2cents. I found it. And now, I have another
>>>> question and it is this: do I apply the Trim before or after E Q?
>>>> Thanks again.
>>>>
>>>> Best,
>>>>
>>>> Dammie
>>>>
>>>> On 5/4/20, Steve Baskis <baskis...@gmail.com
>>>> <mailto:baskis...@gmail.com>> wrote:
>>>>> The trim plug-in is located under other within the plug-ins menu if
>>>>> I’m
>>>>> not
>>>>> mistaken.
>>>>>
>>>>> Respectfully,
>>>>> Steve Baskis
>>>>>
>>>>>> On May 4, 2020, at 20:44, Dammie Onafeko <mindof...@gmail.com
>>>>>> <mailto:mindof...@gmail.com>>
>>>>> The trim plug-in is located under other within the plug-ins menu if
>>>>> I’m
>>>>> not
>>>>> mistaken.
>>>>>
>>>>> Respectfully,
>>>>> Steve Baskis
>>>>>
>>>>>> On May 4, 2020, at 20:44, Dammie Onafeko <mindof...@gmail.com
>>>>>> wrote:
>>>>>>
>>>>>> Thanks Mike! But I tried Declip and it didn't change anything.
>>>>>> Someone
>>>>>> mentioned the trim to me, but I checked the plugin section in
>>>>>> ProTools
>>>>>> and couldn't find it. Could you tell where exactly where it is in
>>>>>> ProTools? Thanks!
>>>>>>
>>>>>> Best,
>>>>>>
>>>>>> Dammie
>>>>>>
>>>>>>> On 5/4/20, Michael Holmes <m.richar...@gmail.com
>>>>>>
>>>>>> Thanks Mike! But I tried Declip and it didn't change anything.
>>>>>> Someone
>>>>>> mentioned the trim to me, but I checked the plugin section in
>>>>>> ProTools
>>>>>> and couldn't find it. Could you tell where exactly where it is in
>>>>>> ProTools? Thanks!
>>>>>>
>>>>>> Best,
>>>>>>
>>>>>> Dammie
>>>>>>
>>>>>>> On 5/4/20, Michael Holmes <m.richar...@gmail.com
>>>>>>> <mailto:m.richar...@gmail.com>> wrote:
>>>>>>> I haven’t tried this, but Izotope Elements has a DeClip plugin. I
>>>>>>> believe
>>>>>>> it
>>>>>>> smooths out the hard clip sounds. If the track sounds okay despite
>>>>>>> the
>>>>>>> high
>>>>>>> peak, you could get away with the Pro Tools Trim plugin before EQ
>>>>>>> and
>>>>>>> such.
>>>>>>>
>>>>>>>>> On May 4, 2020, at 18:08, Dammie Onafeko <mindof...@gmail.com
>>>>>>>>> <mailto:mindof...@gmail.com>>
>>>>>>> I haven’t tried this, but Izotope Elements has a DeClip plugin. I
>>>>>>> believe
>>>>>>> it
>>>>>>> smooths out the hard clip sounds. If the track sounds okay despite
>>>>>>> the
>>>>>>> high
>>>>>>> peak, you could get away with the Pro Tools Trim plugin before EQ
>>>>>>> and
>>>>>>> such.
>>>>>>>
>>>>>>>>> On May 4, 2020, at 18:08, Dammie Onafeko <mindof...@gmail.com
>>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Hi guys:
>>>>>>>>
>>>>>>>> I have this audio in a mix that the person on speaking was too
>>>>>>>> close
>>>>>>>> to the mic. The level of audio in the mix is +1. I'm trying to
>>>>>>>> figure
>>>>>>>> out what to do. Anyone has an idea? I'm reading online now, but in
>>>>>>>> the
>>>>>>>> meantime, if you have a solution, I'd very much appreciate it.
>>>>>>>> Thanks!
>>>>>>>>
>>>>>>>> Best,
>>>>>>>>
>>>>>>>> Dammie
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups
>>>>>>>> "Pro Tools Accessibility" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send
>>>>>>>> an
>>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>.
>>>>>>>>
>>>>>>>> Hi guys:
>>>>>>>>
>>>>>>>> I have this audio in a mix that the person on speaking was too
>>>>>>>> close
>>>>>>>> to the mic. The level of audio in the mix is +1. I'm trying to
>>>>>>>> figure
>>>>>>>> out what to do. Anyone has an idea? I'm reading online now, but in
>>>>>>>> the
>>>>>>>> meantime, if you have a solution, I'd very much appreciate it.
>>>>>>>> Thanks!
>>>>>>>>
>>>>>>>> Best,
>>>>>>>>
>>>>>>>> Dammie
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups
>>>>>>>> "Pro Tools Accessibility" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send
>>>>>>>> an
>>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com
>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com>.
>>>>>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups
>>>>>>> "Pro Tools Accessibility" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send
>>>>>>> an
>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>> <mailto:ptaccess+u...@googlegroups.com>.
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups
>>>>>>> "Pro Tools Accessibility" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send
>>>>>>> an
>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com
>>>>>>> <https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com>.
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups
>>>>>> "Pro Tools Accessibility" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send
>>>>>> an
>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>> <mailto:ptaccess+u...@googlegroups.com>.
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups
>>>>>> "Pro Tools Accessibility" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send
>>>>>> an
>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com
>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com>.
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups
>>>>> "Pro Tools Accessibility" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an
>>>>> email to ptaccess+u...@googlegroups.com
>>>>> <mailto:ptaccess+u...@googlegroups.com>.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups
>>>>> "Pro Tools Accessibility" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an
>>>>> email to ptaccess+u...@googlegroups.com
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com
>>>>> <https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com>.
>>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups
>>>> "Pro Tools Accessibility" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an
>>>> email to ptaccess+u...@googlegroups.com
>>>> <mailto:ptaccess+u...@googlegroups.com>.
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups
>>>> "Pro Tools Accessibility" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an
>>>> email to ptaccess+u...@googlegroups.com
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com
>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com>.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an
>>> email to ptaccess+u...@googlegroups.com
>>> <mailto:ptaccess+u...@googlegroups.com>.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an
>>> email to ptaccess+u...@googlegroups.com
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com
>>> <https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com>.
>>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to ptaccess+u...@googlegroups.com
>> <mailto:ptaccess+u...@googlegroups.com>.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to ptaccess+u...@googlegroups.com
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com
>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com>.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to ptaccess+u...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptaccess/977FE58B-D3C5-469D-BC19-E38E6DBC726D%40gmail.com.
> --
> You received this message because you are subscribed to the Google Groups
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to ptaccess+u...@googlegroups.com.
> To view this discussion on the web visit
>
Slau Halatyn
May 5, 2020, 12:01:49 PM5/5/20
to PTAccess List
Dammie,
If you want to keep it under 0 dB, there are multiple ways of doing it. One simple way is to select the entire length of the timeline for that track in the Edit window and lower the level of the clips with clip Gain. If your clip gain is set to its default value, pressing Control+Shift+Down Arrow will bring the clip volume down by half a decibel for each press. So, to bring down the volume 2 decibels, press Control+Shift+Down Arrow 4 times.
Setting an appropriate threshold depends on the average levels of the audio in a track. It's impossible to say what the right threshold would be. Use your ears and study how compression works. I'm trying to help but you're asking questions that take more than an email to explain.
Good luck,
Slau
To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d8gBTKHpu0VTBHupRhboWPreRKUUXqxYg%2BBw8VcRqrkAw%40mail.gmail.com.
CHUCK REICHEL
May 5, 2020, 12:08:49 PM5/5/20
to ptac...@googlegroups.com
Hi Dammie,
If you can't hear it distorting just "clip gain" it down 5 Db or so and call it a day! :)
To clip gain your audio track down select the whole track and hit;
Control shift down arrow to decrees it or up arrow to increase it.
Bang your done
Clip gain increments default to half of a Db so if you want it down 5 DB hold control shift then hit down arrow ten times to lower the track by 5 Db.
talk soon
Chuck"God does not play dice with the universe"
"Albert Einstein’
> To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d8gBTKHpu0VTBHupRhboWPreRKUUXqxYg%2BBw8VcRqrkAw%40mail.gmail.com.
If you can't hear it distorting just "clip gain" it down 5 Db or so and call it a day! :)
To clip gain your audio track down select the whole track and hit;
Control shift down arrow to decrees it or up arrow to increase it.
Bang your done
Clip gain increments default to half of a Db so if you want it down 5 DB hold control shift then hit down arrow ten times to lower the track by 5 Db.
talk soon
Chuck"God does not play dice with the universe"
"Albert Einstein’
Dammie Onafeko
May 7, 2020, 6:58:15 PM5/7/20
to ptac...@googlegroups.com
Chuck, Slau, and all, thank you! your advices worked I did the control
Shift Down Arrow and the became fairly better than previously. Thanks
to you all.
Best regards,
Ibrahim
>>> https://groups.google.com/d/msgid/ptaccess/977FE58B-D3C5-469D-BC19-E38E6DBC726D%40gmail.com
>>> <https://groups.google.com/d/msgid/ptaccess/977FE58B-D3C5-469D...@gmail.com>.
>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d8gBTKHpu0VTBHupRhboWPreRKUUXqxYg%2BBw8VcRqrkAw%40mail.gmail.com>.
>
Shift Down Arrow and the became fairly better than previously. Thanks
to you all.
Best regards,
Ibrahim
>> <mailto:slauh...@gmail.com>> wrote:
>>> If your audio is distorted, the Trim plug-in will not repair it. The
>>> Trim
>>> plug-in will simply lower the volume of the distorted sound and it will
>>> remain distorted. If, however, the audio is going over 0 dB FS because
>>> of
>>> internal processing and the original audio is not distorted, there's
>>> still a
>>> chance to salvage it. It all depends upon whether the original audio is
>>> clipped. Pre-fader metering will let you know whether the original clip
>>> has
>>> reached 0 dB.
>>> Slau
>>>
>>>
>>>> On May 5, 2020, at 8:40 AM, Dammie Onafeko <mindof...@gmail.com>
>>>> wrote:
>>>>
>>>> Thanks Stefan! I get it now. It didn't occur to me that I was
>>>> repairing the audio. It makes a great deal of sense.
>>>>
>>>> Any tips on the parameters? God bless!
>>>>
>>>> Best,
>>>>
>>>> Dammie
>>>>
>>>> On 5/5/20, 'Stefan Albertshauser' via Pro Tools Accessibility
>>>> <ptac...@googlegroups.com <mailto:ptac...@googlegroups.com>
>>>> <mailto:ptac...@googlegroups.com <mailto:ptac...@googlegroups.com>>>
>>> If your audio is distorted, the Trim plug-in will not repair it. The
>>> Trim
>>> plug-in will simply lower the volume of the distorted sound and it will
>>> remain distorted. If, however, the audio is going over 0 dB FS because
>>> of
>>> internal processing and the original audio is not distorted, there's
>>> still a
>>> chance to salvage it. It all depends upon whether the original audio is
>>> clipped. Pre-fader metering will let you know whether the original clip
>>> has
>>> reached 0 dB.
>>> Slau
>>>
>>>
>>>> On May 5, 2020, at 8:40 AM, Dammie Onafeko <mindof...@gmail.com>
>>>> wrote:
>>>>
>>>> Thanks Stefan! I get it now. It didn't occur to me that I was
>>>> repairing the audio. It makes a great deal of sense.
>>>>
>>>> Any tips on the parameters? God bless!
>>>>
>>>> Best,
>>>>
>>>> Dammie
>>>>
>>>> On 5/5/20, 'Stefan Albertshauser' via Pro Tools Accessibility
>>>> <ptac...@googlegroups.com <mailto:ptac...@googlegroups.com>
>>>> wrote:
>>>>> I would apply it before the EQ, as you want to work with the repaired
>>>>> signal.
>>>>>
>>>>> Best Stefan
>>>>>
>>>>>> Am 05.05.2020 um 13:01 schrieb Dammie Onafeko <mindof...@gmail.com
>>>>>> <mailto:mindof...@gmail.com>
>>>>>> <mailto:mindof...@gmail.com <mailto:mindof...@gmail.com>>>:
>>>>> I would apply it before the EQ, as you want to work with the repaired
>>>>> signal.
>>>>>
>>>>> Best Stefan
>>>>>
>>>>>> Am 05.05.2020 um 13:01 schrieb Dammie Onafeko <mindof...@gmail.com
>>>>>> <mailto:mindof...@gmail.com>
>>>>>>
>>>>>> Thanks guys for your 2cents. I found it. And now, I have another
>>>>>> question and it is this: do I apply the Trim before or after E Q?
>>>>>> Thanks again.
>>>>>>
>>>>>> Best,
>>>>>>
>>>>>> Dammie
>>>>>>
>>>>>> On 5/4/20, Steve Baskis <baskis...@gmail.com
>>>>>> <mailto:baskis...@gmail.com>
>>>>>> <mailto:baskis...@gmail.com <mailto:baskis...@gmail.com>>>
>>>>>> Thanks guys for your 2cents. I found it. And now, I have another
>>>>>> question and it is this: do I apply the Trim before or after E Q?
>>>>>> Thanks again.
>>>>>>
>>>>>> Best,
>>>>>>
>>>>>> Dammie
>>>>>>
>>>>>> On 5/4/20, Steve Baskis <baskis...@gmail.com
>>>>>> <mailto:baskis...@gmail.com>
>>>>>> wrote:
>>>>>>> The trim plug-in is located under other within the plug-ins menu if
>>>>>>> I’m
>>>>>>> not
>>>>>>> mistaken.
>>>>>>>
>>>>>>> Respectfully,
>>>>>>> Steve Baskis
>>>>>>>
>>>>>>>> On May 4, 2020, at 20:44, Dammie Onafeko <mindof...@gmail.com
>>>>>>>> <mailto:mindof...@gmail.com>
>>>>>>>> <mailto:mindof...@gmail.com <mailto:mindof...@gmail.com>>>
>>>>>>> The trim plug-in is located under other within the plug-ins menu if
>>>>>>> I’m
>>>>>>> not
>>>>>>> mistaken.
>>>>>>>
>>>>>>> Respectfully,
>>>>>>> Steve Baskis
>>>>>>>
>>>>>>>> On May 4, 2020, at 20:44, Dammie Onafeko <mindof...@gmail.com
>>>>>>>> <mailto:mindof...@gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Thanks Mike! But I tried Declip and it didn't change anything.
>>>>>>>> Someone
>>>>>>>> mentioned the trim to me, but I checked the plugin section in
>>>>>>>> ProTools
>>>>>>>> and couldn't find it. Could you tell where exactly where it is in
>>>>>>>> ProTools? Thanks!
>>>>>>>>
>>>>>>>> Best,
>>>>>>>>
>>>>>>>> Dammie
>>>>>>>>
>>>>>>>>> On 5/4/20, Michael Holmes <m.richar...@gmail.com
>>>>>>>>> <mailto:m.richar...@gmail.com>
>>>>>>>>> <mailto:m.richar...@gmail.com
>>>>>>>>
>>>>>>>> Thanks Mike! But I tried Declip and it didn't change anything.
>>>>>>>> Someone
>>>>>>>> mentioned the trim to me, but I checked the plugin section in
>>>>>>>> ProTools
>>>>>>>> and couldn't find it. Could you tell where exactly where it is in
>>>>>>>> ProTools? Thanks!
>>>>>>>>
>>>>>>>> Best,
>>>>>>>>
>>>>>>>> Dammie
>>>>>>>>
>>>>>>>>> On 5/4/20, Michael Holmes <m.richar...@gmail.com
>>>>>>>>> <mailto:m.richar...@gmail.com>
>>>>>>>>> <mailto:m.richar...@gmail.com>>> wrote:
>>>>>>>>> I haven’t tried this, but Izotope Elements has a DeClip plugin. I
>>>>>>>>> believe
>>>>>>>>> it
>>>>>>>>> smooths out the hard clip sounds. If the track sounds okay despite
>>>>>>>>> the
>>>>>>>>> high
>>>>>>>>> peak, you could get away with the Pro Tools Trim plugin before EQ
>>>>>>>>> and
>>>>>>>>> such.
>>>>>>>>>
>>>>>>>>>>> On May 4, 2020, at 18:08, Dammie Onafeko <mindof...@gmail.com
>>>>>>>>>>> <mailto:mindof...@gmail.com>
>>>>>>>>>>> <mailto:mindof...@gmail.com <mailto:mindof...@gmail.com>>>
>>>>>>>>> I haven’t tried this, but Izotope Elements has a DeClip plugin. I
>>>>>>>>> believe
>>>>>>>>> it
>>>>>>>>> smooths out the hard clip sounds. If the track sounds okay despite
>>>>>>>>> the
>>>>>>>>> high
>>>>>>>>> peak, you could get away with the Pro Tools Trim plugin before EQ
>>>>>>>>> and
>>>>>>>>> such.
>>>>>>>>>
>>>>>>>>>>> On May 4, 2020, at 18:08, Dammie Onafeko <mindof...@gmail.com
>>>>>>>>>>> <mailto:mindof...@gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Hi guys:
>>>>>>>>>>
>>>>>>>>>> I have this audio in a mix that the person on speaking was too
>>>>>>>>>> close
>>>>>>>>>> to the mic. The level of audio in the mix is +1. I'm trying to
>>>>>>>>>> figure
>>>>>>>>>> out what to do. Anyone has an idea? I'm reading online now, but
>>>>>>>>>> in
>>>>>>>>>> the
>>>>>>>>>> meantime, if you have a solution, I'd very much appreciate it.
>>>>>>>>>> Thanks!
>>>>>>>>>>
>>>>>>>>>> Best,
>>>>>>>>>>
>>>>>>>>>> Dammie
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google
>>>>>>>>>> Groups
>>>>>>>>>> "Pro Tools Accessibility" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send
>>>>>>>>>> an
>>>>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>>>>>> <mailto:ptaccess+u...@googlegroups.com
>>>>>>>>>>
>>>>>>>>>> Hi guys:
>>>>>>>>>>
>>>>>>>>>> I have this audio in a mix that the person on speaking was too
>>>>>>>>>> close
>>>>>>>>>> to the mic. The level of audio in the mix is +1. I'm trying to
>>>>>>>>>> figure
>>>>>>>>>> out what to do. Anyone has an idea? I'm reading online now, but
>>>>>>>>>> in
>>>>>>>>>> the
>>>>>>>>>> meantime, if you have a solution, I'd very much appreciate it.
>>>>>>>>>> Thanks!
>>>>>>>>>>
>>>>>>>>>> Best,
>>>>>>>>>>
>>>>>>>>>> Dammie
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Groups
>>>>>>>>>> "Pro Tools Accessibility" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send
>>>>>>>>>> an
>>>>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>>.
>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com
>>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com>
>>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com
>>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com>>.
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups
>>>>>>>>> "Pro Tools Accessibility" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send
>>>>>>>>> an
>>>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>>>>> <mailto:ptaccess+u...@googlegroups.com
>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com
>>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com>
>>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com
>>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-pjrVKBFrMZpN9RZjGp-KkJCCz4C%2BguRfeWJdDZhV0wg%40mail.gmail.com>>.
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups
>>>>>>>>> "Pro Tools Accessibility" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send
>>>>>>>>> an
>>>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>>.
>>>>>>>>> To view this discussion on the web visit
>>>>>>>>> https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com
>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com>
>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com
>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com>>.
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups
>>>>>>>> "Pro Tools Accessibility" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send
>>>>>>>> an
>>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>>>> <mailto:ptaccess+u...@googlegroups.com
>>>>>>>>> To view this discussion on the web visit
>>>>>>>>> https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com
>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com>
>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com
>>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/52A06949-97F2-42BC-AFBE-49C01562F999%40gmail.com>>.
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups
>>>>>>>> "Pro Tools Accessibility" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send
>>>>>>>> an
>>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>>>> <mailto:ptaccess+u...@googlegroups.com>>.
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com
>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com>
>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com
>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com>>.
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups
>>>>>>> "Pro Tools Accessibility" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send
>>>>>>> an
>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>>> <mailto:ptaccess+u...@googlegroups.com
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com
>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com>
>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com
>>>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d-FMbZRt_sJXTEXxLP2Dn4-MS8ACwDR0f%3DT-GyFoZ_%2Brw%40mail.gmail.com>>.
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups
>>>>>>> "Pro Tools Accessibility" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send
>>>>>>> an
>>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>>> <mailto:ptaccess+u...@googlegroups.com>>.
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com
>>>>>>> <https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com>
>>>>>>> <https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com
>>>>>>> <https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com>>.
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups
>>>>>> "Pro Tools Accessibility" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send
>>>>>> an
>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>> <mailto:ptaccess+u...@googlegroups.com
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com
>>>>>>> <https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com>
>>>>>>> <https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com
>>>>>>> <https://groups.google.com/d/msgid/ptaccess/5A996258-C42B-4E34-9483-48C159863047%40gmail.com>>.
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups
>>>>>> "Pro Tools Accessibility" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send
>>>>>> an
>>>>>> email to ptaccess+u...@googlegroups.com
>>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>>> <mailto:ptaccess+u...@googlegroups.com>>.
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com
>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com>
>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com
>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com>>.
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups
>>>>> "Pro Tools Accessibility" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an
>>>>> email to ptaccess+u...@googlegroups.com
>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>> <mailto:ptaccess+u...@googlegroups.com
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com
>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com>
>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com
>>>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9kvM4QzQcuSoi83Szx%2B1EMwZcQc93wux_2SFXGnjqiwg%40mail.gmail.com>>.
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups
>>>>> "Pro Tools Accessibility" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an
>>>>> email to ptaccess+u...@googlegroups.com
>>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>>> <mailto:ptaccess+u...@googlegroups.com>>.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com
>>>>> <https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com>
>>>>> <https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com
>>>>> <https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com>>.
>>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups
>>>> "Pro Tools Accessibility" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an
>>>> email to ptaccess+u...@googlegroups.com
>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>> <mailto:ptaccess+u...@googlegroups.com
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com
>>>>> <https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com>
>>>>> <https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com
>>>>> <https://groups.google.com/d/msgid/ptaccess/9A9D58E9-0728-4CB0-8A00-46905236F0A8%40icloud.com>>.
>>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups
>>>> "Pro Tools Accessibility" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an
>>>> email to ptaccess+u...@googlegroups.com
>>>> <mailto:ptaccess+u...@googlegroups.com>
>>>> <mailto:ptaccess+u...@googlegroups.com>>.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com
>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com>
>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com
>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com>>.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an
>>> email to ptaccess+u...@googlegroups.com
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com
>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com>
>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com
>>>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d9_2mt_4WxmGof_u%2BmBYvX78fpVL-wv5nxoaiOq3TmiMg%40mail.gmail.com>>.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an
>>> https://groups.google.com/d/msgid/ptaccess/977FE58B-D3C5-469D-BC19-E38E6DBC726D%40gmail.com
>>> <https://groups.google.com/d/msgid/ptaccess/977FE58B-D3C5-469D...@gmail.com>.
>>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to ptaccess+u...@googlegroups.com
>> <mailto:ptaccess+u...@googlegroups.com>.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d8gBTKHpu0VTBHupRhboWPreRKUUXqxYg%2BBw8VcRqrkAw%40mail.gmail.com
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to ptaccess+u...@googlegroups.com
>> <mailto:ptaccess+u...@googlegroups.com>.
>> To view this discussion on the web visit
>> <https://groups.google.com/d/msgid/ptaccess/CAN%3Dh5d8gBTKHpu0VTBHupRhboWPreRKUUXqxYg%2BBw8VcRqrkAw%40mail.gmail.com>.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to ptaccess+u...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptaccess/3125B228-CBB7-46F6-9BDE-4C0510D0BEF3%40gmail.com.
> --
> You received this message because you are subscribed to the Google Groups
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to ptaccess+u...@googlegroups.com.
> To view this discussion on the web visit
>
Reply all
Reply to author
Forward
0 new messages