Nozzle comes down to PCB height while fiducial check

[S G.]

Hi,

The nozzle is comin down to PCB height while checking fiducials. All other safe z is working correct except this one. Where do i have to change the setting that the nozzle stays at safe z while checking  fids?

thanks.

[mark maker]

A suspiciously similar case was discussed here:

https://groups.google.com/g/openpnp/c/usVC9UdP8g4/m/fg8ef49CAAAJ

Quote:

You need to assign the virtual Z axis to the camera:

The newest test version should actually catch that mistake with Issues & Solutions.

https://github.com/openpnp/openpnp/pull/1535

However, there is currently a problem with the very newest test version for Windows 7 so if you have that OS, please use this version:

https://openpnp.s3-us-west-2.amazonaws.com/index.html?prefix=test/2023-03-17_15-40-52.1ae8d52/

About that, see also

https://groups.google.com/g/openpnp/c/nF6X3Hj-c9I

_Mark

--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/8fff0fb3-1a63-4405-8051-e69fc56bec35n%40googlegroups.com.

[S G.]

Thank you Mark.

I will check it and report here if that fixes the issue.