Failure of fiducial homing with circular symmetry cropped to nothing.

[Flash Packets]

My machine is ball screw system with servos. It has a placement accuracy that is what should be expected with errors considerably smaller than the 0201s I hope to place. During initial calibration, homing to the home, primary and secondary fiducials worked. Then I added the bottom camera and everything fell completely apart. When I home the system it dies with a Circular symmetry exception: search ranged cropped to nothing even though the cursor is perfectly centered over the fiducial. The system is running on a Raspi5 -- Kudos on that!! I might say that the 1mm fiducial is a white dot surrounded by an almost perfect black background extending  40 mm in every direction. Have I made the background too perfect?

[tonyl...@gmail.com]

> Have I made the background too perfect?

I doubt it. 

Please post all the .xml files in your .openpnp2 directory as well as a log file (with the logging level set to TRACE) that shows your homing attempt.

[Flash Packets]

Occasionally, if I thrash around log enough it will work once and then it's back to small animal sacrifices and cursing the gods.

--
You received this message because you are subscribed to a topic in the Google Groups "OpenPnP" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/openpnp/jtsQTdVW1Ic/unsubscribe.
To unsubscribe from this group and all its topics, send an email to openpnp+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/openpnp/351760eb-06ed-47c9-8635-8831f9fb4377n%40googlegroups.com.

[tonyl...@gmail.com]

It doesn't look like you have calibrated your top camera's units per pixel. Please follow the calibration instructions provided on the Issues & Solutions tab.