Re: {Metal Arts Guild} Digest for metalartsguild@googlegroups.com - 2 Messages in 2 Topics

4 views
Skip to first unread message

Robyn Hawk

unread,
Sep 11, 2013, 2:36:03 PM9/11/13
to metalar...@googlegroups.com
Catherine - is this the absolute last time you will be using those casings?  the reason I ask is that it is relatively inexpensive to get a cutting die produced...either Kevin Potter or Dar Shelton 

Then you would own the solution...

Robyn 



On Wed, Sep 11, 2013 at 5:05 AM, <metalar...@googlegroups.com> wrote:

Group: http://groups.google.com/group/metalartsguild/topics

    Crowe Catherine <imago...@yahoo.ca> Sep 10 11:20AM -0700  

    I am looking to get circles cut to an odd size: 37mm to be exact, which is about 1.1 mm less than 1 1/2"
    Anyone know where I can get that done? I don't need large quantities - maybe
    about 10, a couple from fine silver and several from copper. Very thin
    gauges (27-29 guage - the thickness does not need to be so precise)
     
    It's for watch faces. They need to fit exactly in a certain housing. I will
    be enamelling them, so they will need to grow a little.
     
    Catherine Crowe
     
    http://www.imagocorvi.com

     

    imagocorvi <imago...@yahoo.ca> Sep 10 08:06AM -0700  

    I am looking to get circles cut to an odd size: 37mm to be exact, which is
    about 1.1 mm less than 1 1/2"
    Anyone know where I can get that done? I don't need large quantities -
    maybe about 10, a couple from fine silver and several from copper. Very
    thin gauges (27-29 guage - the thickness does not need to be so precise)
     
    It's for watch faces. They need to fit exactly in a certain housing. I will
    be enamelling them, so they will need to grow a little.

     

--
You received this message because you are subscribed to the Google Groups "Metal Arts Guild" group.
To unsubscribe from this group and stop receiving emails from it, send an email to metalartsguil...@googlegroups.com.
To post to this group, send email to metalar...@googlegroups.com.
Visit this group at http://groups.google.com/group/metalartsguild.
For more options, visit https://groups.google.com/groups/opt_out.



--
Robyn Hawk


Reply all
Reply to author
Forward
0 new messages