Regarding the welding consumable for the joint on Saddle(or Support lug) to Reinforced pad

[Manager Kim]

Dear Experts,

I would like to ask you the choice of the welding consumable for

- Joint on Saddle to Reinforced pad

- Material :

1. Saddle - CS(SA283-C) : P-1

2. Reinforced pad - Low alloy(SA387-5) : P-5B 

In that case, which P No welding consumable is applied for that joint. 

P-5B or P-1.

If there are any requirement for this issue in the ASME code, please advise me.

Best regards,

Kim, Junghwan as Project Manager in DKME

[Prasad Rode]

Dear air,

As per code, in case of welding of dissimilar material, consumable of lower grade material can be used to weld it.

So, in your case, consumable of P1 material can be used.

Regards
Prasad

[Manager Kim]

Dear Mr. Prasad,

Thanks for your advice.

Could you please let me know which paragraph can I refer to welding of dissimilar material in ASME Code?

It would be highly appreciated to me.

Best regards,

Kim, Junghwan / Project Manager in DKME

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d9535442-b1fd-42df-9843-0226b4792d01%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

[pradip kumar Sil]

ASME B-31.1 Para 127.2

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMS8U9AgHe5%2BQBkH%2BPcyz-E6ogmY%2BzWHuW3SXOEyFAzuScsd_Q%40mail.gmail.com.

[Kannayeram Gnanapandithan]

u can use either welding consumable and should exceed the nominal tensile strength of weaker one. Ref ASME B 31.1, 127.2.1,(B)

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Thu, Feb 9, 2017 at 10:50 AM, pradip kumar Sil <prad...@gmail.com> wrote:

This message is eligible for Automatic Cleanup! (prad...@gmail.com) Add cleanup rule | More info

ASME B-31.1 Para 127.2

On Thu, Feb 9, 2017 at 9:06 AM, Manager Kim <junghw...@gmail.com> wrote:

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMS8U9AgHe5%2BQBkH%2BPcyz-E6ogmY%2BzWHuW3SXOEyFAzuScsd_Q%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB%3DAs8%3D6O9mcfS6RzEcyV8GTOVr9GYARe2XDRsS%2Br1YQaEH_5Q%40mail.gmail.com.