reduce speed for last layers

[Infobarquee Infobarquee]

Hi everybody,
Is 't possible with kisslicer (very good project) to reduce speed for the last layers?
thank's

[hugues]

Hi,

In the material tab you can setup a minimum time for layer, but not only for the last. It can work if your model is thin at the end.

[Infobarquee]

Hi
Thank's but I do it and m'y modèle isn'tthin. I just want the l'astrologie layers slowy for à good finish.

Envoyé de mon bureau mobile
Loic leborgne
Tel : 06.26.12.17.06

> Le 18 oct. 2014 à 19:26, hugues <hto...@gmail.com> a écrit :
>
> Hi,
>
> In the material tab you can setup a minimum time for layer, but not only for the last. It can work if your model is thin at the end.
>

> --
> You received this message because you are subscribed to a topic in the Google Groups "Kisslicer Refugee Camp" group.
> To unsubscribe from this topic, visit https://groups.google.com/d/topic/kisslicer-refugee-camp/NEPgSklMQxY/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to kisslicer-refugee...@googlegroups.com.
> To post to this group, send email to kisslicer-r...@googlegroups.com.
> Visit this group at http://groups.google.com/group/kisslicer-refugee-camp.
> To view this discussion on the web visit https://groups.google.com/d/msgid/kisslicer-refugee-camp/7ff8f5c1-541c-408a-8d43-609c18e24a9c%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.