Kisslicer Refugee Camp

Hi Ron unlike cubex firmware ,this firmware for cube pro is calculating the filament usage from the

You can find the treefrog on Thingiverse, but if you print the "Cone" is faster and you

I just put a new print nozzle on it for $150, so I would have to turn down that offer, plus I am

As you decrease the Gap (XY) on vertically straight parts then having a separate Gap (XY) Bottom and

Hi, I'm a little new to 3D Printing and I just bought a CubePro Trio, hoping to get really good

On Saturday, November 8, 2014 11:16:07 AM UTC-8, Plexus Brett wrote: Jonathan does a great job with

Hi, the cylinder is into "Support" tab, -> Pillar, you can set to "None" to

Thanks, to everyone for all your help! I'm now printing production parts with KISSlicer on my

You can try to reduce the gap setting, you will see the effect by zooming a lot on the seam point in

Did another part last night after tweaking my PID settings for the bed. The banding is better but

Hi everyone! I'm new to this, so please bear with me if any of my questions or technical terms

I felt like this program needed a subreddit, for people to discuss settings and such. So i created it

Yes, I manually calibrated my dual extruders (see pic). The white material is HIPS and the blue is

Consistent perimeter sense (ie:clockwise/ccw) and lining up the loop starts goes a loooong way to

I've recently set up my printer with dual heads, as soon as I tune them up finely enough and get

On Thursday, October 30, 2014 11:47:59 AM UTC-7, Thomas Roager wrote: Well i could use a knife, but

here's my piece of gcode that fixes this G1 Y0 Z.5; G1 X0 Y0 Z.1 E25 F900; extrudes the "

looks as if it makes all of my files bigger. Here is a smaller gcode file, original is 624kb and

I'm using 1.4.5.10 without problems on Yosemite, MacBook Air

Okay, thanks. I think I have a voltage problem. -Lon On Sunday, October 26, 2014 7:50:14 PM UTC-7,

Thanks a lot for your answers! I changed my temperature back to 260°C (from 252°C) and added another

On Thursday, October 16, 2014 3:07:12 AM UTC-7, Davide Ardizzoia wrote: I completely agree. Once you

On Monday, October 20, 2014 3:33:15 PM UTC-7, Vlad O wrote: I have Min = 0.3 and max 5 mm^3/s Running

Have you run the calibrations? Past that, could be Min/Max speeds in Flow Tweak.

That sounds like a great idea. It can also host default profiles for different machines. Post

I think it's possible, Rodney build a custom board for cubex (similar to 3d touch) and Jetguy and

Those of you with a 3dTouch, what settings are you finding that work the best?

Hello All, what if I want NOW filament needed for each extruder involved in a multiextruder print ?

Would you please specify that slicer with arbitrary support ? Thanks, Vlad On Sunday, October 12,

Flow rate is too high. In KS, decrease "bed roughness" This happens to me every single time