Tool Box Keys

60 visualizzazioni
Passa al primo messaggio da leggere

Alan Comfort

da leggere,
15 set 2021, 20:44:1115/09/21
a guzzi-...@googlegroups.com
Here is a photo of the various keys that I use for the Moto Guzzi tool boxes.  I have two types of locks on the various bikes in the fleet. One type has a small slotted cylinder and the other does not. The flat keys are for the lock with the cylinder and the keys with the round shank are for the locks without the slotted cylinder. The flat keys are made with 3/64 and 5/64 steel sheet metal. I recommend the heavier steel as it is easy to bend the 3/64 steel if the lock is sticky. The round shank keys are either welded from drill rod and washers or are modified skeleton keys found in  junk stores. These keys are easy to make with a hacksaw, file and die grinder. Some day I will make them prettier. It helps to put some oil on the locks before trying to open them. It takes a bit of trial and error to get them to work, 
I trust that the ruler and grid paper will give you the dimensions that you need. 
Ciao, Alan
DSC_0321.jpg

Steve Bend, Oregon

da leggere,
16 set 2021, 13:20:1016/09/21
a Guzzi Singles
Thanks very much Alan.  That is perfect.

kste...@gmail.com

da leggere,
16 set 2021, 23:43:1216/09/21
a Guzzi Singles
Here is my “genuine” key for my 54 I got recently 



Sent from myMail for iOS


Friday, 17 September 2021, 03:20 +1000 from bris...@gmail.com <bris...@gmail.com>:
--
You received this message because you are subscribed to the Google Groups "Guzzi Singles" group.
To unsubscribe from this group and stop receiving emails from it, send an email to guzzi-single...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/guzzi-singles/c71a159c-9bb0-43fa-ac9b-a5e02885a16dn%40googlegroups.com.
image-17-09-21-13-42.jpeg
image-17-09-21-13-42-1.jpeg

Steve Bend, Oregon

da leggere,
17 set 2021, 10:24:4817/09/21
a Guzzi Singles
Thank you for the photos kste.  Can you tell us the source for the key?
Thank you,

Antonio Ricciardi

da leggere,
17 set 2021, 14:29:5917/09/21
a guzzi-...@googlegroups.com

I have keys. Send me a message. I am in Ohio.Zipolo

Stephen Brisken

da leggere,
18 set 2021, 11:48:1318/09/21
a Guzzi Singles
Supergrease, I can't find a way to message you directly so I sent and email to you following your message to me.

kste...@gmail.com

da leggere,
18 set 2021, 20:55:5218/09/21
a Guzzi Singles
Trying to remember !  Will check my old emails later. I also got a pump and some period cable ties.  I think someone on here helped. 



Sent from myMail for iOS


Saturday, 18 September 2021, 00:24 +1000 from bris...@gmail.com <bris...@gmail.com>:

John O Regan

da leggere,
19 set 2021, 10:13:1719/09/21
a guzzi-...@googlegroups.com
Hi All,
I got toolbox locks and  keys from Valenti in Italy
Then I found out that the locks had been changed and the lids had been drilled out 😟

Regards
John


ksteenst

da leggere,
19 set 2021, 21:49:3819/09/21
a Guzzi Singles
I finally found where I bought it... https://valentimotorestauri.com/en/

but i think you know that now!

jimf...@gmail.com

da leggere,
4 ott 2021, 09:37:1104/10/21
a Guzzi Singles
I was able to make one using the pics. Thanks

Alan Comfort

da leggere,
4 ott 2021, 21:08:0204/10/21
a guzzi-...@googlegroups.com
Sometimes it is much easier to make parts than to chase them down.
Regarding the flywheel parts, Valenti should have those items.
Alan in Roberts Creek

Rispondi a tutti
Rispondi all'autore
Inoltra
0 nuovi messaggi