Titanium disk brake conversion.wanted...

[aria...@gmail.com]

Seeking a suitable converter bought the popular A to Z model but my problem is the 160 disk just hits the frame,any advice appreciated thankyou

[Jon Norstog]

You might try a 130mm disc.  Other options would include taking the frame to a 'builder who welds TI and having the job done right. 

Good luck!

jn

On Thu, Aug 19, 2021 at 11:33 AM aria...@gmail.com <aria...@gmail.com> wrote:

Seeking a suitable converter bought the popular A to Z model but my problem is the 160 disk just hits the frame,any advice appreciated thankyou

--
--
You received this message because you are subscribed to the Google
Groups "Framebuilders" group.
 
Searchable archives for this group can be found at http://groups.google.com/group/framebuilders (recent content) and http://search.bikelist.org (older content).
 
To post to this group, send email to frameb...@googlegroups.com
To unsubscribe from this group, send email to
framebuilder...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/framebuilders?hl=en

---
You received this message because you are subscribed to the Google Groups "Framebuilders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to framebuilder...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/framebuilders/d62aefda-6a94-43e8-89a9-225fb6a3b6a7n%40googlegroups.com.

[david levy]

Dent the stay to clear the rotor or go to a 140mm rotor.

Dave

To view this discussion on the web visit https://groups.google.com/d/msgid/framebuilders/CAEasqY2pFupSbDxtgiSN8P954n4nKeuZDsQfyeG3Zg%3DBynqicQ%40mail.gmail.com.

--

Dave Levy 
Ti Cycles Fabrication (Bicycle stuff) 
Cedar Ridge Fabrication (Car stuff) 
15707 NW McNamee Road 
Portland OR 97231 USA
503-621-9670 | http://ticycles.com
https://www.facebook.com/pages/Ti-Cycles-Fabrication/167667523288692

https://www.facebook.com/Cedar-Ridge-Fabrication-LLC-1709306112629624/