Framebuilders

Thomas, The 1.2 mm is the wall thickness where the binder is brazed on. I wanted a little more

Since the adhesive is just to prevent loss, rather than truly structural, maybe consider something

Thanks Alex, I did email Peter at Ceeway about this, but I'm far too impatient to wait for a

All epoxy is not alike. It sounds like you're concerned that repeated flexing might break the

I'm interested in a few pieces. I could come up from Seattle this afternoon/evening if you are

The Smith's torch has been sold. On Wed, Mar 11, 2026 at 11:52 AM Mike Jenkins <mjenk20236@

J28 torch has been sold. On Mon, Mar 2, 2026 at 8:18 AM Mike Jenkins <mjenk...@gmail.com>

This is what it looks like as a dry fit. I then flux it all up and have a go at it. \ -Rich, in soon

I have for many years used the Uniweld no.71 torch and use type 17 tips. For sure a better price

Wow! The Journeyman outfit is almost $750 and that is discounted! Check your l9oca pawnshop! jn On

Whit, sorry to hear about Meriwether shutting down, you were one of the good ones. Anyone buying this

I don't have builders liability insurance. The couplers are recycled, I'm using them on an

Oh yeah, I missed the part about stem diameter! Glad you found what you needed. I like Merry - they

Matt, you might want to talk directly to Gasflux yourself. (440) 365-1941. I've stopped by their

Thanks to all who responded with answers! David Feldman Vancouver, WA

Dave, Bike Friday stays are small in diameter and you can bend them all over the place with no issues

While I have no experience with cargo bikes I happened upon this and figured I'd post a link. It

Wayne, I've gotten three bikes and a bunch of racks powder coated at Seattle Powdercoat. This was

I can imagine that a substantial increase in stiffness in the steerer with these diameters (assuming

I've only done straight blades the last few years, but when I was bending it was with true temper

Cable splitters https://www.ticycles.com/components/da-vinci-cable-splitters Dave Levy Ti Cycles

Bruce Gordon Cycles for the splitters. Jess On Fri, Oct 31, 2025 at 9:47 PM <framebuilders@

I will check those out! Get Outlook for iOS From: peter weigle <jpwei...@gmail.com> Sent:

Wondering if anyone knows of a source that shows the actual CS profile not jut a cross section?

https://firsthand.bike/ Here is my goto for all parts and materials. Dave Levy Ti Cycles Fabrication

Roy, I'm curious. You said this is a new frame? What is the issue? Tom NE Ohio On Friday, October

Hei Jon, FWIW : My dad mostly gave A or F, he said either you got it ir you didn't, I almost

We've tested the prototype and -- while it works -- we've discovered it needs some refinement

there it is, rim-brakes, I KNEW it had SOMEthing to do with geometry... My mind is/was to fuzzy to

A few weeks ago I was visiting family in the Sandpoint, ID area, driving along US 95. I saw a pillar