Separated STLs

84 views
Skip to first unread message

szafran

unread,
May 12, 2018, 4:09:14 PM5/12/18
to Cyclone PCB Factory
Hello, 
I'm finishing my build of Cyclone PCB - great work btw (I mean the design :) ). I have only one quetion. Can I get STLs with separeted parts? 
I mean eg. spindle holder is done with 2 parts combined in to one object. Same with "Cycl_Ycarriage_linearBearingHolder_x4" with 4 parts, all gears are combined also. 
Sorry if it's obvious but I couldn;t find any files, even on thingiverse etc. 

Cheers and I will post photo of my build after I finish completely :)

Carlos García

unread,
May 12, 2018, 5:50:13 PM5/12/18
to cyclone-p...@googlegroups.com
Hi! We did it this way because Cura readily allows to separate the STLs (right click -> split into parts).
So you can re-arrange them for printing or even export them.

I hope that helps! :-)

Cheers,
Carlos

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-pcb-factory@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/3ee371ca-6e61-460a-9075-ab60c610f09b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

szafran

unread,
May 12, 2018, 10:51:55 PM5/12/18
to Cyclone PCB Factory
Oh, I see. I use KISSlicer on a daily basis so I wasn't aware :) thanks!
Message has been deleted

szafran

unread,
May 15, 2018, 9:02:17 AM5/15/18
to Cyclone PCB Factory
I've done some investigation. Cura does not support splitting any more - at least way you described. I've downloaded several version of that program and versions dated after mid 2016 seems to don't have that option (maybe it could after adding some plugins). Am I right? 
If so, it maybe a good idea to upload separated parts somewhere to make it easier for future users or for users who don't use Cura often. 

Cheers!

W dniu sobota, 12 maja 2018 23:50:13 UTC+2 użytkownik Carlos GS napisał:
Hi! We did it this way because Cura readily allows to separate the STLs (right click -> split into parts).
So you can re-arrange them for printing or even export them.

I hope that helps! :-)

Cheers,
Carlos
On Sat, May 12, 2018 at 10:09 PM, szafran <p.fabi...@gmail.com> wrote:
Hello, 
I'm finishing my build of Cyclone PCB - great work btw (I mean the design :) ). I have only one quetion. Can I get STLs with separeted parts? 
I mean eg. spindle holder is done with 2 parts combined in to one object. Same with "Cycl_Ycarriage_linearBearingHolder_x4" with 4 parts, all gears are combined also. 
Sorry if it's obvious but I couldn;t find any files, even on thingiverse etc. 

Cheers and I will post photo of my build after I finish completely :)

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-p...@googlegroups.com.

Carlos García

unread,
May 15, 2018, 11:10:46 AM5/15/18
to cyclone-p...@googlegroups.com
Ouch! What a pity :(
Then my advice is to use Cura 15.04 to do the splitting... If you can then share the splitted parts, it would help other people in the same situation.

Sorry for the inconvenience!

On Tue, May 15, 2018 at 3:02 PM, szafran <p.fabi...@gmail.com> wrote:
I've done some investigation. Cura does not support splitting any more - at least way you described. I've downloaded several version of that program and versions dated after mid 2016 seems to don't have that option (maybe it could after adding some plugins). Am I right? 
If so, it maybe a good idea to upload separated parts somewhere to make it easier for future users or for users who don't use Cura often. 

Cheers!

W dniu sobota, 12 maja 2018 23:50:13 UTC+2 użytkownik Carlos GS napisał:
Hi! We did it this way because Cura readily allows to separate the STLs (right click -> split into parts).
So you can re-arrange them for printing or even export them.

I hope that helps! :-)

Cheers,
Carlos
On Sat, May 12, 2018 at 10:09 PM, szafran <p.fabi...@gmail.com> wrote:
Hello, 
I'm finishing my build of Cyclone PCB - great work btw (I mean the design :) ). I have only one quetion. Can I get STLs with separeted parts? 
I mean eg. spindle holder is done with 2 parts combined in to one object. Same with "Cycl_Ycarriage_linearBearingHolder_x4" with 4 parts, all gears are combined also. 
Sorry if it's obvious but I couldn;t find any files, even on thingiverse etc. 

Cheers and I will post photo of my build after I finish completely :)

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsubscribe...@googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-pcb-factory@googlegroups.com.

Visit this group at https://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/19fe786a-b9ef-48e6-ab79-d27ae86b3dac%40googlegroups.com.

szafran

unread,
May 16, 2018, 7:40:52 AM5/16/18
to Cyclone PCB Factory
Ok, I've done this. Do you want me to upload those STLs here or somewhere else and put a link here? Cheers


W dniu wtorek, 15 maja 2018 17:10:46 UTC+2 użytkownik Carlos GS napisał:
Ouch! What a pity :(
Then my advice is to use Cura 15.04 to do the splitting... If you can then share the splitted parts, it would help other people in the same situation.

Sorry for the inconvenience!
On Tue, May 15, 2018 at 3:02 PM, szafran <p.fabi...@gmail.com> wrote:
I've done some investigation. Cura does not support splitting any more - at least way you described. I've downloaded several version of that program and versions dated after mid 2016 seems to don't have that option (maybe it could after adding some plugins). Am I right? 
If so, it maybe a good idea to upload separated parts somewhere to make it easier for future users or for users who don't use Cura often. 

Cheers!

W dniu sobota, 12 maja 2018 23:50:13 UTC+2 użytkownik Carlos GS napisał:
Hi! We did it this way because Cura readily allows to separate the STLs (right click -> split into parts).
So you can re-arrange them for printing or even export them.

I hope that helps! :-)

Cheers,
Carlos
On Sat, May 12, 2018 at 10:09 PM, szafran <p.fabi...@gmail.com> wrote:
Hello, 
I'm finishing my build of Cyclone PCB - great work btw (I mean the design :) ). I have only one quetion. Can I get STLs with separeted parts? 
I mean eg. spindle holder is done with 2 parts combined in to one object. Same with "Cycl_Ycarriage_linearBearingHolder_x4" with 4 parts, all gears are combined also. 
Sorry if it's obvious but I couldn;t find any files, even on thingiverse etc. 

Cheers and I will post photo of my build after I finish completely :)

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-p...@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

Carlos García

unread,
May 16, 2018, 8:16:50 AM5/16/18
to cyclone-p...@googlegroups.com
Thank you!! If they fit, you can attach them here in a zip file. Cheers!

On Wed, May 16, 2018 at 1:40 PM, szafran <p.fabi...@gmail.com> wrote:
Ok, I've done this. Do you want me to upload those STLs here or somewhere else and put a link here? Cheers

W dniu wtorek, 15 maja 2018 17:10:46 UTC+2 użytkownik Carlos GS napisał:
Ouch! What a pity :(
Then my advice is to use Cura 15.04 to do the splitting... If you can then share the splitted parts, it would help other people in the same situation.

Sorry for the inconvenience!
On Tue, May 15, 2018 at 3:02 PM, szafran <p.fabi...@gmail.com> wrote:
I've done some investigation. Cura does not support splitting any more - at least way you described. I've downloaded several version of that program and versions dated after mid 2016 seems to don't have that option (maybe it could after adding some plugins). Am I right? 
If so, it maybe a good idea to upload separated parts somewhere to make it easier for future users or for users who don't use Cura often. 

Cheers!

W dniu sobota, 12 maja 2018 23:50:13 UTC+2 użytkownik Carlos GS napisał:
Hi! We did it this way because Cura readily allows to separate the STLs (right click -> split into parts).
So you can re-arrange them for printing or even export them.

I hope that helps! :-)

Cheers,
Carlos
On Sat, May 12, 2018 at 10:09 PM, szafran <p.fabi...@gmail.com> wrote:
Hello, 
I'm finishing my build of Cyclone PCB - great work btw (I mean the design :) ). I have only one quetion. Can I get STLs with separeted parts? 
I mean eg. spindle holder is done with 2 parts combined in to one object. Same with "Cycl_Ycarriage_linearBearingHolder_x4" with 4 parts, all gears are combined also. 
Sorry if it's obvious but I couldn;t find any files, even on thingiverse etc. 

Cheers and I will post photo of my build after I finish completely :)

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsubscribe...@googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsubscribe...@googlegroups.com.

To post to this group, send email to cyclone-p...@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-pcb-factory@googlegroups.com.

Visit this group at https://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/f5b37a63-243e-4f1a-b1c9-742703726f92%40googlegroups.com.

szafran

unread,
May 16, 2018, 8:56:03 AM5/16/18
to Cyclone PCB Factory
Ok, so for future users I'm attaching separated STL files here. Rest of STL files already have just one part so I'm only attaching moded ones. 
Source of these files is main repo on github. I think it's version 2.3. Anyway - they work because I've alredy have built Cyclone using them. 

I've done this beacuse sometimes it's necessary to print just one part or it's easier to change printing orientation etc.
If anyone find any error - please write me here. I will fix it. 

Cheers!
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-p...@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-p...@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.
Cycl_Ycarriage_linearBearingHolder_x1.stl
Cycl_rodFixer_x1.stl
Cycl_XYgearCover_x1.stl
single_stls.zip
Cycl_Ycarriage_PCBholder_x1_lower.stl
Cycl_Ycarriage_PCBholder_x1_upper.stl
Cycl_Yfront_RodIdlers_left.stl
Cycl_Yfront_RodIdlers_right.stl
Cycl_allGears_xy_axis_rod.stl
Cycl_allGears_xy_axis_stepper.stl
Cycl_allGears_z_axis_rod.stl
Cycl_allGears_z_axis_stepper.stl
Reply all
Reply to author
Forward
0 new messages