Cyclone PCB Factory

I've settled with 400 for all 3 axis (the Z axis now can easily handle it as well). Still tried

Just for information: I added art suport for my CNC- Gcode-Controller: https://github.com/pknoe3lh/

Thanks! I will try today! Em qua, 22 de jun de 2016 às 05:22, Carlos García <carlosgarciasaura@

Hello, everyone, I built the CyclonPCB. The machine works perfectly. But I have difficulties with

Thanks for the info, I discover the problem. It was a settings problem. I have some configuration

Hi, it seems to be working OK for me with the latest version of OpenScad. Please make sure to

I bought these https://www.aliexpress.com/item/32917405361.html?spm=a2g0s.9042311.0.0.27424c4dYL0kYc

Thanks W dniu niedz., 17.03.2019 o 18:18 Arnošt Galuska <mcp...@gmail.com> napisał(a): I am

That looks good, thanks for sharing. Both look really good. I have seen those and wondered about

50% infill is a good choice El dom., 10 feb. 2019 13:11, Benas Molis <benas...@gmail.com>

Hello, where did you buy the Mega3D board from?

hi guys thnx for joining ok i got a cyclops pcb factory build i got all up and running normal homing

Hi, finally I have terminated printing and assembling all the mechanical parts of my Cyclone! Now I

Yes, I connected the shaft of the spindle motor to ground using a 1 MOhm resistor. My motor had a

Ok, so for future users I'm attaching separated STL files here. Rest of STL files already have

Hi all After a few updates and tweaks it starts to get really nice results. The new gantry really did

I went with a 400W silent, quite a big difference when comparing with a dremel and it is indeed

Servus Alex from just around the corner, my name is Rainer and I am from St. Poelten (which is also

Hello! You can find a version of GRBL with the correct settings here: https://github.com/CarlosGS/

Maybe double check Z steps/mm in bCNC controller setttings?

I had my Cyclone under maintenance for long time, more than a year I think and finally had the time

Check that all parameters match these: https://github.com/CarlosGS/grblForCyclone/wiki/1)-Configure-

how do I change speed?

I know cnc shield, I use it often Il giorno martedì 12 settembre 2017 14:28:50 UTC+2, Iceflow ha

My English is very poor.You can look at my blog. http://engineer2designer.blogspot.tw/search/label/

You only write to tell us that? the group its not dead, but maybe you can search a little by yourself

Hi all, Bringing this up here to see if anyone has noticed the same issues. It's two separate

Pues eso, muy buenas a todos y un honor publicar aqui. Soy de Asturias y he construido este artilugio

Can you post the file for this?

Oops !! The "split into parts" option of "Cura" isn't intended for that.

Hi, I am Angel Espeso, an EE with a a Cyclone on my Desk right now. Also twittering about makies at

ah that... still palying around. I have some references that I look when needed: https://othermachine

I havent done it yet. Dne 26. 4. 2017 7:03 odpoledne napsal uživatel "'Lars Mielchen'