gcode pcb

[Simone Petrino]

I have a problem a print pcb. I did not understand if I'm wrong to generate the gcode or if the cyclone does not work. someone has a small gcode for a pcb? so I can do a test. thank you

[Iceflow]

Whats the problem? explain it a little more so we can try to help.

2017-09-10 21:34 GMT+02:00 Simone Petrino <federi...@gmail.com>:

I have a problem a print pcb. I did not understand if I'm wrong to generate the gcode or if the cyclone does not work. someone has a small gcode for a pcb? so I can do a test. thank you

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send an email to cyclone-pcb-factory@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/f72c0e0b-3bb1-42d6-b947-4556e7f79f20%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Simone Petrino]

it often affects more deeply at other times it does not affect it at all. Sometimes it locks bcnc.has a gcode of a already printed pcb with good results? so I understand if I'm wrong to generate code or have hardware / bcnc problems

Il giorno domenica 10 settembre 2017 23:03:02 UTC+2, Iceflow ha scritto:

Whats the problem? explain it a little more so we can try to help.

2017-09-10 21:34 GMT+02:00 Simone Petrino <federi...@gmail.com>:

I have a problem a print pcb. I did not understand if I'm wrong to generate the gcode or if the cyclone does not work. someone has a small gcode for a pcb? so I can do a test. thank you

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.

To post to this group, send an email to cyclone-p...@googlegroups.com.

[Simone Petrino]

http://oi67.tinypic.com/29n8kdx.jpg

why? autolevel problem?

[Iceflow]

How many probe points you use?

2017-09-12 19:17 GMT+02:00 Simone Petrino <federi...@gmail.com>:

http://oi67.tinypic.com/29n8kdx.jpg

why? autolevel problem?

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.

To post to this group, send an email to cyclone-pcb-factory@googlegroups.com.

Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/e0ff47fb-de95-4e7d-9522-8632f9e5bb83%40googlegroups.com.

[Simone Petrino]

8x8

[Iceflow]

8x8 in that part of the pcb you milled or in the whole pcb? if its in the whole pcb i think its maybe a little low number of points, maybe you need to make more probe points...

Anyway, it seems the bit have gone too deep into the copper... what milling deep do you have configured? and what kind of bit did you use?

2017-09-13 9:42 GMT+02:00 Simone Petrino <federi...@gmail.com>:

8x8

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.

To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsubscribe...@googlegroups.com.

To post to this group, send an email to cyclone-pcb-factory@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/cbf4e14c-9bdf-4c42-b3b0-d6879fb0055f%40googlegroups.com.

[Nando]

I'd say too deep and too slow.

To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-pcb-factory@googlegroups.com.

Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/CAHN3uBihwz1jMsHKQTY1DF8FStw6hPSPu6wQvJPGyHfH0Fk2Bg%40mail.gmail.com.

[Simone Petrino]

milling deep 0.2. I use 0.2 V bit

[Simone Petrino]

how do I change speed?