error: Alarm lock

[Štěpán Rydval]

I configured and uploaded GRBL firmware into my machine. I connected it to computer. For control I am using grbl controller 3.6.1 but every time when I try to send any g code int the machine it says: "error: Alarm lock" What I should do? How to fix it?

[David Kahler]

Are you homing first?

[Štěpán Rydval]

I have already fixed it.

[Carlos García]

Sorry for not answering earlier, I'm glad you fixed it!

On Sun, Apr 16, 2017 at 11:36 PM, Štěpán Rydval <mcp...@gmail.com> wrote:

I have already fixed it.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send an email to cyclone-pcb-factory@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/caa0b075-d7d2-4f20-90f2-d15932e79796%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

[Iceflow]

How? it would help others in the future to know it :D

2017-04-16 23:36 GMT+02:00 Štěpán Rydval <mcp...@gmail.com>:

I have already fixed it.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.

[Štěpán Rydval]

It is okay. I know you font have free time every time. The fix Is very simple. Just send $X command. This will unlock it. But now I have another problem. When I uploader gcode and started milling it does not recognize endstop. But this is not a really big project because I Always set the zero manualy. Thanks for awesome support. I love open source projects.

[Štěpán Rydval]

Sorry for my bad words. My mobile phone tries to translate everything to Czech language and on my mobile phone I am not capable of editing older message.

[Nando]

Oh yes. When first plugged you always have to unlock it. 

About the end stops that's a option in the firmware you can enable. 

On Apr 16, 2017 23:31, "Štěpán Rydval" <mcp...@gmail.com> wrote:

It is okay. I know you font have free time every time. The fix Is very simple. Just send $X command. This will unlock it. But now I have another problem. When I uploader gcode and started milling it does not recognize endstop. But this is not a really big project because I Always set the zero manualy. Thanks for awesome support. I love open source projects.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send an email to cyclone-pcb-factory@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/e1bc552b-030f-4647-a02f-fbb902cbaa86%40googlegroups.com.

[junlp]

i encountered the same error clock issue. How did you fixed it?

On Friday, April 14, 2017 at 10:10:03 AM UTC-7, Štěpán Rydval wrote:

[junlp]

I encountered the same issue. How did you fixed the error alarm clock issue. thanks

[Arnošt Galuska]

I am sorry, I can't remember. It was a long time ahoj. Due to lack of usable software I dissassembled my cyclone and build another 3D printer instead. 

Dne ne 3. 3. 2019 4:19 uživatel junlp <spurgeon...@gmail.com> napsal:

I encountered the same issue. How did you fixed the error alarm clock issue. thanks

On Sunday, April 16, 2017 at 2:36:00 PM UTC-7, Štěpán Rydval wrote:

I have already fixed it.

--
You received this message because you are subscribed to a topic in the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/cyclone-pcb-factory/Twzc-nU4X1w/unsubscribe.
To unsubscribe from this group and all its topics, send an email to cyclone-pcb-fac...@googlegroups.com.
To post to this group, send email to cyclone-p...@googlegroups.com.

Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/4e50b9e3-bda9-45c8-acc4-4c46663b4ab8%40googlegroups.com.

[Paweł Fabiszewski]

Thanks

You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.

To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-fac...@googlegroups.com.

To post to this group, send email to cyclone-p...@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/CAHi5d0D6zQ5RnUp4-of1%2BBGZs-cTcGQRwZPM-kZwvgYh2q8EHg%40mail.gmail.com.