Cyclone 2 finally alive :)

[Marc Muntada]

Hi all, 

Just wanted to share that my Cyclone is already alive. It comes from a Cyclone 1 which I could never use due to a lack of time and because the Spindle holder printed in PLA broke twice.

I redesigned the Z_Carriage, based on the piece from Herb D-Punkt, but tried to put the Spindle as near to the axis as possible.

I attach a picture of the final machine (the workbed is still the Cyclone 1)

And this is the Spindle Holder attachment to reuse the Spindle I bought for the Cylclone 1 (and the power control board)

I could mill the open source logo in wood by using th JSCUT link successfully, thanks Carlos for this "hello world" :)

And my first PCB with SMD and through hole!:) I used the eagle PCB-2-Gcode plugin and tweaked the wrong G-Code.

Then leveled the bed using CNC-G-CODE-Controller and zeroing the Z on the copper. I used a 60º bit and a 1mm router bit.

This is the result: (just a female USB connector expander for the Cyclone)

By the way, I have a tachometer and measured the spindle speed. It goes from 0 to 10600rpm (at 48V). 

Well, thanks everybody for all the help in the past!!

Happy milling!:)

Marc

[Samuel Kranz]

looks really good :D

Congratulations

[Carlos García]

Awesome build indeed Marc!
Thanks a lot for sharing the part through git. It looks very compact and robust!

On Wed, Feb 18, 2015 at 7:57 AM, Samuel Kranz <secu...@gmail.com> wrote:

looks really good :D

Congratulations

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-fac...@googlegroups.com.
To post to this group, send email to cyclone-p...@googlegroups.com.
Visit this group at http://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/b11eb902-596f-4fe0-b2a4-49aec6d57d7d%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.