Started up my cyclone for first time in a while, it seems to be moving too fast?

[exxonvaldoogz]

I have not powered up my cyclone in a while. I have a new laptop so I loaded a fresh copy of BCNC and tried to mill a bowl.

It seems to be working ok but the tool path moves REALLY fast now. I didn't change any settings in GRBL. Is there some default settings in the new version of BCNC that I should change?

[Carlos García]

Check that all parameters match these: https://github.com/CarlosGS/grblForCyclone/wiki/1)-Configure-bCNC-for-Cyclone

The default velocities of bCNC are very high indeed!

On Sun, Sep 17, 2017 at 11:42 PM, exxonvaldoogz <exxonv...@gmail.com> wrote:

I have not powered up my cyclone in a while. I have a new laptop so I loaded a fresh copy of BCNC and tried to mill a bowl.

It seems to be working ok but the tool path moves REALLY fast now. I didn't change any settings in GRBL. Is there some default settings in the new version of BCNC that I should change?

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-pcb-factory@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/d4d38199-6877-4d65-ae73-86888e8326bc%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.