On Nov 22, 2021, at 9:27 PM, Jonathan Salter <jonn...@gmail.com> wrote:
More to come, but here is the kit that I’m getting Bill.
Hoping to do most of it by myself. Also looking for hoots of vent locations, and existing duct runs. So if you have any photos of your air duct that would be great too.
--
You received this message because you are subscribed to the Google Groups Catalina355 group. To post to this group, send email to catal...@googlegroups.com. To unsubscribe from this group, send email to catalina355...@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/catalina355?hl=en
If changing the topic, please start a new message and send to catal...@googlegroups.com, rather than clicking "reply" to an existing message.
---
You received this message because you are subscribed to the Google Groups "Catalina355" group.
To unsubscribe from this group and stop receiving emails from it, send an email to catalina355...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/322A64E4-3E23-45D2-85D3-AE7997E2F367%40gmail.com.
<image1.jpeg>
Thanks,
Jon Salter
#9 “Salty Cloud”
Sent from my iPhoneOn Nov 22, 2021, at 1:09 PM, bill pittore <bill.p...@gmail.com> wrote:
I don’t have anything to offer but I am interested which unit you decided to go with. If I went with one of the air units I was thinking of plumbing it into the existing air ducts from the electric A/C-heat unit.
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/EDDD8237-C1D5-4AA6-985A-E3E2176D0AF0%40gmail.com.
--
You received this message because you are subscribed to the Google Groups Catalina355 group. To post to this group, send email to catal...@googlegroups.com. To unsubscribe from this group, send email to catalina355...@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/catalina355?hl=en
If changing the topic, please start a new message and send to catal...@googlegroups.com, rather than clicking "reply" to an existing message.
---
You received this message because you are subscribed to the Google Groups "Catalina355" group.
To unsubscribe from this group and stop receiving emails from it, send an email to catalina355...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/322A64E4-3E23-45D2-85D3-AE7997E2F367%40gmail.com.
On Nov 23, 2021, at 12:36 PM, bill pittore <bill.p...@gmail.com> wrote:
Thank you Jon for the info. Next time I’m at the boat I’ll take some pictures of the existing A/C duct work. I have this one picture from the aft starboard storage area where the fuel fill line and fuel vent line are located. The smaller gray duct feeds the aft cabin. The larger gray duct squeezes between the hull and the starboard side of the aft cabin sleeping area under the shelf just below the starboard porthole. The duct goes through the aft cabin closet then behind the stove and just above those storage cubby-holes in the starboard salon behind the seat back cushions. There is a vent on the shelf on the starboard side above the seat back cushions. The duct continues forward through the bulkhead and into the forward cabin closet and a vent on the forward side of the closet wall.
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/BC0134EC-227F-445C-AABF-A4D4F97A697B%40gmail.com.
On Nov 26, 2021, at 10:30 AM, Jonathan Salter <jonn...@gmail.com> wrote:
On Nov 27, 2021, at 3:43 PM, Jonathan Salter <jonn...@gmail.com> wrote:
On either a heater or AC system, can anyone tel me if they have a return grill, and if so, where’s it’s located?Sent from my iPhoneOn Nov 26, 2021, at 10:30 AM, Jonathan Salter <jonn...@gmail.com> wrote:
Thanks Bill!This was a big help. I was able to get most of my 4” duct ran through that same space. I tried to go down the port side instead but the aft tank sits right in that passageway so there is no room for ducting.So I ran mine down the stbd side similar to the ducting you showed. There’s a nice access in the aft cabin closet for routing, and then in the furthest aft storage compartment (cubby).That’s as far as I’ve gotten so far. Looks like if I run all they way to the fwd berth, I will need to cut some holes through the sides of the middle cubby.Here’s some pictures for reference:
<image0.jpeg>
Stbd passageway as seen from the aft cabin closet access looking aft. Small section of 4” duct shown for reference.Stbd passageway from aft cabin access looking fwd.
<image3.jpeg>
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/32054FA5-7CCC-4D87-AAE3-62DD01C785EB%40gmail.com.
On Nov 27, 2021, at 1:32 PM, bill pittore <bill.p...@gmail.com> wrote:
On the A/C I have and from what I’ve heard is the standard procedure, the A/C unit is mounted in the transom storage area under the propane tank. It is accessed from the aft cabin. If you go into the aft cabin, the return is on the back wall of the cabin on the port side. If you take the grill off then you have access to the whole A/C unit. Here’s a pic from the sales website for my boat. It’s not very high res though but you can see the grill in the far corner on the back wall.
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/DB14F140-2658-4105-94F2-8D9C9D3D9678%40gmail.com.
On Nov 27, 2021, at 2:43 PM, Jonathan Salter <jonn...@gmail.com> wrote:
On either a heater or AC system, can anyone tel me if they have a return grill, and if so, where’s it’s located?
Thanks Bill!This was a big help. I was able to get most of my 4” duct ran through that same space. I tried to go down the port side instead but the aft tank sits right in that passageway so there is no room for ducting.So I ran mine down the stbd side similar to the ducting you showed. There’s a nice access in the aft cabin closet for routing, and then in the furthest aft storage compartment (cubby).That’s as far as I’ve gotten so far. Looks like if I run all they way to the fwd berth, I will need to cut some holes through the sides of the middle cubby.Here’s some pictures for reference:
<image0.jpeg>
Stbd passageway as seen from the aft cabin closet access looking aft. Small section of 4” duct shown for reference.Stbd passageway from aft cabin access looking fwd.
<image3.jpeg>
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/32054FA5-7CCC-4D87-AAE3-62DD01C785EB%40gmail.com.
On Nov 27, 2021, at 2:12 PM, Marvin Isgur <kir...@sbcglobal.net> wrote:
It is located on the back wall of the aft cabin towards the port side
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/DF0755EC-4E7F-4922-B40C-53CCC06D373D%40sbcglobal.net.
On Oct 26, 2022, at 10:10 AM, bill pittore <bill.p...@gmail.com> wrote:
Hi Jon,
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/8919b556-d1bc-4871-af8b-fb62caf89d59n%40googlegroups.com.
On Oct 26, 2022, at 10:10 AM, bill pittore <bill.p...@gmail.com> wrote:
Hi Jon,
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/8919b556-d1bc-4871-af8b-fb62caf89d59n%40googlegroups.com.
On Oct 30, 2022, at 12:57 PM, Jonathan Salter <jonn...@gmail.com> wrote:
Heater install 2.0 is going good. I have a Webasto Air Top 40. I mounted mine, slightly at an angle, on the bulkhead in the aft port locker area. I bought the kit from Sure Marine here in Seattle.At this point, all I have left is to deal and clamp the exhaust line, and prime the fuel. Hoping to have a startup soon.
I have many more pictures, but here is a sample. Let me know if you want any other specific details
<image0.jpeg><image1.jpeg><image2.jpeg><image3.jpeg><image4.jpeg>
To view this discussion on the web visit https://groups.google.com/d/msgid/catalina355/7E8BA915-09DE-46EF-95C9-2D50F2D45E79%40gmail.com.