I'm trying to run Android-x86 on my Dell Venue 11 Pro. It's very similar to the Asus T100.
It runs reasonably well with this image that Chih-Wei posted for the Asus T100 https://groups.google.com/d/msg/android-x86/FUiFCtrgc6I/Fqt8Rg-fpQkJ
What work:
* Graphic
* Touch
* Audio (sometimes)
* Battery
* Reboot/shutdown
* Backlight
Not work:
* Wifi
* Bluetooth
* Sensors
* Camera
* MicroSD
* Internal Mic
* Power and volume buttons
I have a couple module I want to add but I haven't been able to make an image that works as well as the one above.
Lately I've tried pstglia's android kernel branches, both 3.16 and 3.18 from this post https://groups.google.com/d/msg/android-x86/WF3lSiLVFgs/mQ8A_oaHt9sJ
When I run my own image the graphics are very sluggish and I get a lot of messages like this:
<5>[ 4.329687] sd 2:0:0:0: [sda] Attached SCSI removable disk
<6>[ 4.644296] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock
<3>[ 4.646743] mmc0: Got data interrupt 0x00600000 even though no data operation was in progress.
<3>[ 4.651534] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
<6>[ 4.655844] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x400900
<3>[ 4.658086] mmcblk0: error -84 transferring data, sector 2, nr 2, cmd response 0x900, card status 0x0
<4>[ 4.660331] mmcblk0: retrying using single block read
<3>[ 4.664936] mmcblk0: error -84 transferring data, sector 2, nr 2, cmd response 0x900, card status 0x0
<3>[ 4.667248] blk_update_request: I/O error, dev mmcblk0, sector 2
<3>[ 4.671932] mmcblk0: error -84 transferring data, sector 3, nr 1, cmd response 0x900, card status 0x0
<3>[ 4.674331] blk_update_request: I/O error, dev mmcblk0, sector 3
<3>[ 4.676808] EXT3-fs (mmcblk0): error: unable to read superblock
Attached is the cpuinfo, lsmod and dmesg proc/modules, etc. from my build based on pstglia/v3.18-rc6_android branch
Any help on how I can build an image that's equivalent to Chih-Wei's android-x86-t100.img is greatly appreciated.
Eric
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86...@googlegroups.com.
To post to this group, send email to andro...@googlegroups.com.
Visit this group at http://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.