What changes need to be made for this img to work on Lenovo Miix 2 8 tablet? It is similar to Asus T100, just screen resolution is smaller (800x1280). I've tested this version and only get blank screen after console messages.
Wow, the development is fast when my tablet is already broken :'(
Anybody have broken their digitizer? Where can I get a replacement (except ASUS service center)?
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86...@googlegroups.com.
To post to this group, send email to andro...@googlegroups.com.
Visit this group at http://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Anybody have broken their digitizer? Where can I get a replacement (except ASUS service center)?
Thanks for the link, will check it out if they have a digitizer for my t100 (as my t100ta have different digitizer with t100ca)
--
Is DATA=data.img not supported anymore?
I cant remember, but long time ago android installer asks to make data.img... And also specify DATA=data.img in grub. So I'm confused somehow. Sorry :(
You can execute stop on console terminal. This will kill Surfaceflinger & other processes
Sorry about my post above I did not realize that some else had already responded. Here are the files you requested from my Arch linux boot. I have the touch screen and Xorg working fine. I do not have internal wireless, Bluetooth or camera working.
Here's logs from booting with nomodeset. If you have any ideas, how to debug normal boot mode - I could get logs from there too, if only I could get to console.
I was able to get a dmesg before the final exit was typed and android full started to boot, but I guess it is is not useful. I have included it anyway just in case.
There was no /dev/fb, but there was a /dev/fb0
Here are the file you requested. Taken before the Use Alt-F1/F2/F3 to switch between virtual consoles" message
09-17 07:57:51.107 1773 1776 I GRALLOC-DRM: create intel for driver: i915 09-17 07:57:51.107 1773 1776 W EGL-GALLIUM: failed to create a pipe screen for i965 09-17 07:57:51.107 1773 1776 W EGL-GALLIUM: failed to create DRM screen 09-17 07:57:51.107 1773 1776 W EGL-GALLIUM: will fall back to other EGL drivers if any
Ron
There was an update to the OS about 5 days ago, update 313. I was wondering if that update has something that would give us the 64 bit UEFI?
I asked on many forums but no one really knows what the update did. I thought I would let you know it's out and ask you if it helps us run android more smoothly in any way.
Thanks again!
Klim
The image is built from android-x86 4.4 codebase
What work:
* Graphic (OpenGL ES2/ES3)
* Touch
* Wifi
* Audio
* Battery
* Reboot/shutdown
Not work:
* Bluetooth
* Sensors
* Camera
* MicroSD
* Backlight
* Internal Mic
* Power and volume buttons
* Installer (but you may install it manually)
Known issue:
* Sometimes the system becomes very slow.
How to use:
Thank you Chih-Wei for your hard works.
What changes need to be made for this img to work on Lenovo Miix 2 8 tablet? It is similar to Asus T100, just screen resolution is smaller (800x1280). I've tested this version and only get blank screen after console messages.
The image is built from android-x86 4.4 codebase
What work:
* Graphic (OpenGL ES2/ES3)
* Touch
* Wifi
* Audio
* Battery
* Reboot/shutdown
Not work:
* Bluetooth
* Sensors
* Camera
* MicroSD
* Backlight
* Internal Mic
* Power and volume buttons
* Installer (but you may install it manually)
Known issue:
* Sometimes the system becomes very slow.
How to use:
work: Graphic (OpenGL ES2/ES3) Touch Wifi Audio Battery Reboot/shutdown
Not work: Bluetooth Sensors Camera MicroSD Backlight Internal Mic Power and volume buttons
Thank's
menuentry 'Boot Android from USB' --class android-x86 { set root='hd0,1' linuxefi /android/kernel androidboot.hardware=android_x86 HWACCEL= INSTALL= DEBUG= initrdefi /android/initrd.img}
WIFI Driver RTL8723BS
and a Goodix Touchscreen
Wifi rtl8723BS – https://github.com/hadess/rtl8723as
Touchscreen Goodix GT9113 – https://github.com/hadess/gt9xx
My Device is an ODYS Wintab 10 (same as the previous poster J.Menke) - Branded chinese tablet which is distributed by a lot of german and international "brands".
The image is built from android-x86 4.4 codebase
What work:
* Graphic (OpenGL ES2/ES3)
* Touch
* Wifi
* Audio
* Battery
* Reboot/shutdown
Not work:
* Bluetooth
* Sensors
* Camera
* MicroSD
* Backlight
* Internal Mic
* Power and volume buttons
* Installer (but you may install it manually)
Known issue:
* Sometimes the system becomes very slow.
How to use:
dd the image to a usb disk and boot from it.
Especially thanks to pstglia who worked out
the android kernel 3.16 for us.
Without his great work it's impossible
to make the big progress.
I'm trying build my own copy of this image so I can add some additional hw support. I can build images from the standard android-x86 repo. It's clear I need to be building from a newer kernel version, as the config from the above image shows Linux/x86 3.17.0-rc4. Is there a separate git repo or branch with this kernel plus whatever additional changes were made to build for the T100?