Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
GE Dryer Lint Trap Design Flaw?
2,826 views
Skip to first unread message
dennislougheed
Jan 21, 2014, 1:02:51 PM1/21/14
to
Model GTMP200EM1WW
Since purchasing this unit in August of 2012 we have experienced
significant accumulations of lint at the exterior vent cover which does
open and close freely and in the walls of the dryer unit beyond the
lint trap which is cleaned after every load. We are cleaning the
exterior vent cap at least three times yearly.
Close examination of the area where the dryer lint trap is installed
reveals that there is a large gap on each side of the fitting in to
which the lint trap screen is inserted which allows vented air to
bypass the lint trap mechanism. Lint then enters the vetting system,
builds up in the immediate dryer wall area and accumulates on the
exterior vent cap. We have never experienced this issue with any
previous dryer. It appears to be a design flaw and I am wondering what
we can do to eliminate this lint bypass issue. I have attached a link
to a picture of the area I believe is the problem.
https://dl.dropboxusercontent.com/u/19195515/IMG_0034.jpg
The area allowing lint bypass of the screen system is the dark
triangular area in the upper left corner of the side perforated panel.
It would appear that air is to pass through the peforations and lint is
not but this open triangular area allows lint to bypass the collector.
Since purchasing this unit in August of 2012 we have experienced
significant accumulations of lint at the exterior vent cover which does
open and close freely and in the walls of the dryer unit beyond the
lint trap which is cleaned after every load. We are cleaning the
exterior vent cap at least three times yearly.
Close examination of the area where the dryer lint trap is installed
reveals that there is a large gap on each side of the fitting in to
which the lint trap screen is inserted which allows vented air to
bypass the lint trap mechanism. Lint then enters the vetting system,
builds up in the immediate dryer wall area and accumulates on the
exterior vent cap. We have never experienced this issue with any
previous dryer. It appears to be a design flaw and I am wondering what
we can do to eliminate this lint bypass issue. I have attached a link
to a picture of the area I believe is the problem.
https://dl.dropboxusercontent.com/u/19195515/IMG_0034.jpg
The area allowing lint bypass of the screen system is the dark
triangular area in the upper left corner of the side perforated panel.
It would appear that air is to pass through the peforations and lint is
not but this open triangular area allows lint to bypass the collector.
dpb
Jan 21, 2014, 1:25:55 PM1/21/14
to
On 1/21/2014 12:02 PM, Dennis Lougheed wrote:
...
> appears to be a design flaw and I am wondering what we can do to
> eliminate this lint bypass issue. I have attached a link to a picture of
> the area I believe is the problem.
>
> https://dl.dropboxusercontent.com/u/19195515/IMG_0034.jpg
>
> The area allowing lint bypass of the screen system is the dark
> triangular area in the upper left corner of the side perforated panel.
> It would appear that air is to pass through the peforations and lint is
> not but this open triangular area allows lint to bypass the collector.
Looks like one could take a small piece of screen and make a filter for
the corner...we've a roughly-same-age GE but I don't remember the
specific arrangement otomh. I'll try to take a look and see how
compares and post back any further ideas if that engenders any...
--
...
> appears to be a design flaw and I am wondering what we can do to
> eliminate this lint bypass issue. I have attached a link to a picture of
> the area I believe is the problem.
>
> https://dl.dropboxusercontent.com/u/19195515/IMG_0034.jpg
>
> The area allowing lint bypass of the screen system is the dark
> triangular area in the upper left corner of the side perforated panel.
> It would appear that air is to pass through the peforations and lint is
> not but this open triangular area allows lint to bypass the collector.
the corner...we've a roughly-same-age GE but I don't remember the
specific arrangement otomh. I'll try to take a look and see how
compares and post back any further ideas if that engenders any...
--
Bob F
Jan 21, 2014, 2:16:17 PM1/21/14
to
clean an unremovable "filter" area.
dpb
Jan 21, 2014, 2:39:39 PM1/21/14
to
On looking, the one here is basically the same altho the corner is
smaller than appears in the photo--but that could just be angle, etc.,
from the picture.
Anyway, the problem is they had to cut the corners off the plastic
filter sections to enable it to slide out the opening--if the "missing"
corners were there, then they would hit the upper portion of the opening
and couldn't get it out for cleaning.
After looking here, I'd try metal duct tape for the purpose and make it
to cover the opening.
--
davec...@gmail.com
Nov 30, 2014, 5:08:54 PM11/30/14
to
Please repost or send me the picure as I have the same problem with a new ge gas dryer I bought from Lowes. GE told me it is normal an blew me off. I did have the exhaust professionally cleaned.
micky
Nov 30, 2014, 7:49:04 PM11/30/14
to
On Sun, 30 Nov 2014 14:08:50 -0800 (PST), davec...@gmail.com wrote:
>Please repost or send me the picure as I have the same problem with a new ge gas dryer I bought from Lowes. GE told me it is normal an blew me off. I did have the exhaust professionally cleaned.
I'm guessin' you'll have to send this again to say who you are replying
>Please repost or send me the picure as I have the same problem with a new ge gas dryer I bought from Lowes. GE told me it is normal an blew me off. I did have the exhaust professionally cleaned.
to, or writing to, or what thread you are referring to. Why not just
quote the whole thing? How many years old is the post.
(Doggone google.groups posters don't know how to do anything right.)
Col. Edmund Burke
Dec 1, 2014, 9:32:31 AM12/1/14
to
<davec...@gmail.com> wrote in message
news:a46284fd-5f2e-4b4e...@googlegroups.com...
news:a46284fd-5f2e-4b4e...@googlegroups.com...
> Please repost or send me the picure as I have the same problem with a new
> ge gas dryer I bought from Lowes. GE told me it is normal an blew me off.
> I did have the exhaust professionally cleaned.
By what, a trained monkey?
> ge gas dryer I bought from Lowes. GE told me it is normal an blew me off.
> I did have the exhaust professionally cleaned.
pathwa...@gmail.com
Oct 10, 2016, 3:44:14 PM10/10/16
to
I was having the same issue. Lots of lint clogging up the exterior vent cover and lint all over my back porch. Called for a repairman who was no help at all. At one point I even found a dryer sheet had made it through to the porch.
I found a fix! I took a piece of 1/2inch foam that had adhesive (peal and stick) and I stuck it around the lint trap in the dryer. It closed the gaps and works like a charm. No more lint getting to the exterior.
I wonder why the GE engineers couldn't fix this?
JMS
hun...@gmail.com
Jan 21, 2017, 9:25:44 AM1/21/17
to
JMS:
Would you be willing to take a picture and show what you did with the foam? I have the same problem with lint all over my deck and inside of dryer vent line.
Thanks in advance. hun...@gmail.com
Tekkie®
Jan 21, 2017, 2:40:47 PM1/21/17
to
hun...@gmail.com posted for all of us...
I have problem with lint in my navel; why doesn't my dryer work?
--
Tekkie
--
Tekkie
Ed Pawlowski
Jan 21, 2017, 4:22:16 PM1/21/17
to
On 1/21/2017 2:41 PM, Tekkie® wrote:
>
> I have problem with lint in my navel; why doesn't my dryer work?
>
Direct a hair dryer to your navel to dry the lint. Best to use only
>
> I have problem with lint in my navel; why doesn't my dryer work?
>
medium heat.
Tekkie®
Jan 24, 2017, 3:10:53 PM1/24/17
to
Ed Pawlowski posted for all of us...
But then the lint goes to my swetty balls...
--
Tekkie
--
Tekkie
Gary
Nov 7, 2017, 12:44:07 PM11/7/17
to
replying to pathwaystojoy, Gary wrote:
Mine is doing this as well
--
for full context, visit https://www.homeownershub.com/maintenance/ge-dryer-lint-trap-design-flaw-781559-.htm
Mine is doing this as well
--
for full context, visit https://www.homeownershub.com/maintenance/ge-dryer-lint-trap-design-flaw-781559-.htm
Tekkie®
Nov 7, 2017, 2:39:58 PM11/7/17
to
Gary posted for all of us...
Datz nize
--
Tekkie
--
Tekkie
Oren
Nov 7, 2017, 3:15:58 PM11/7/17
to
Tekkie®
Nov 7, 2017, 3:53:43 PM11/7/17
to
Oren posted for all of us...
Nope, I wonder if they have an app for that?
--
Tekkie
--
Tekkie
HomeOwnersHub Advisor
Feb 10, 2023, 12:02:01 AM2/10/23
to
It sounds like you may have a lint buildup problem with your GE dryer, which can be a fire hazard. To address the issue, you can try a few things:
1. Clean the lint trap thoroughly after every load: Make sure to remove any lint buildup from the lint trap screen and surrounding areas, and check the exhaust vent for any blockages.
2. Seal the gap around the lint trap: You can use high-temperature silicone caulk to seal the gap around the lint trap, which will help prevent air from bypassing the trap.
3. Check the exhaust vent: Make sure the exhaust vent is properly connected and free of any blockages. If the vent is clogged, it can cause the dryer to overheat and increase the risk of fire.
4. Have a professional inspect and clean the dryer: If the problem persists, you may want to have a professional inspect and clean your dryer to ensure that it is functioning safely and efficiently.
If you are still having issues with lint buildup, you may want to consider contacting GE for further assistance. They may be able to provide a solution or offer a warranty repair.
--
For full context, visit https://www.homeownershub.com/maintenance/ge-dryer-lint-trap-design-flaw-781559-.htm
1. Clean the lint trap thoroughly after every load: Make sure to remove any lint buildup from the lint trap screen and surrounding areas, and check the exhaust vent for any blockages.
2. Seal the gap around the lint trap: You can use high-temperature silicone caulk to seal the gap around the lint trap, which will help prevent air from bypassing the trap.
3. Check the exhaust vent: Make sure the exhaust vent is properly connected and free of any blockages. If the vent is clogged, it can cause the dryer to overheat and increase the risk of fire.
4. Have a professional inspect and clean the dryer: If the problem persists, you may want to have a professional inspect and clean your dryer to ensure that it is functioning safely and efficiently.
If you are still having issues with lint buildup, you may want to consider contacting GE for further assistance. They may be able to provide a solution or offer a warranty repair.
--
For full context, visit https://www.homeownershub.com/maintenance/ge-dryer-lint-trap-design-flaw-781559-.htm
micky
Feb 10, 2023, 1:40:18 AM2/10/23
to
In alt.home.repair, on Fri, 10 Feb 2023 05:01:55 +0000, HomeOwnersHub
We here on the parent ship don't know what his complaint was, so we
can't fairly comment.
can't fairly comment.
Cindy Hamilton
Feb 10, 2023, 4:58:41 AM2/10/23
to
last active in 2017:
https://groups.google.com/g/alt.home.repair/c/-JXe6XcrLqs
--
Cindy Hamilton
Oscar
Feb 10, 2023, 7:53:57 AM2/10/23
to
If the washing machine does a poor job rinsing and a soap residue remains on the fabric, that 'soap-enhanced' lint will build up on the inside of the vent pipe.
But the 'lint from Hell' is that gooey waxy lint caused by fabric softener that clogs the dryer vent pipe. You might have to use a putty knife to remove that stuff. Fabric softener is the devil.
DJ
Dec 14, 2023, 10:32:40 AM12/14/23
to
I have the same problem. A 800 dollar dryer and the link trap doesn’t trap lint. This thing is a fire hazard!
Bob F
Dec 14, 2023, 4:21:08 PM12/14/23
to
On 12/14/2023 7:32 AM, DJ wrote:
> I have the same problem. A 800 dollar dryer and the link trap doesn’t
> trap lint. This thing is a fire hazard!
>
Blow it out, outside, with a leaf blower or air compressor. I have
> I have the same problem. A 800 dollar dryer and the link trap doesn’t
> trap lint. This thing is a fire hazard!
>
revived a couple driers that "did not dry well" this way.
hub...@ccanoemail.com
Dec 14, 2023, 4:59:01 PM12/14/23
to
the lint trap collects about 1/4 of the lint - the rest collects
outside in the rodent grill - which I have to clean every month
so it doesn't clog completely. I've taken the dryer apart twice
to look for a reason and to check the fit of the lint trap
internally - to no avail.
With our previous dryer - with the same style lint trap -
we would clean much more from the lint trap, every load,
and only clear the outside grill about once per year.
John T.
0 new messages