Green Packet DV 250 WiMax Modem Hack

[baby_boy_4u2nv]

I'm wondering if there is any one that could help me with increasing
my bandwidth by altering the settings of my Wimax Broadband Wireless
Modem. After i logged into the wimax modem by inputting the IP address
in the browser i input the usename and pw...and i got a bunch of
settings that i can alter but i'm not too sure jsut what to make of
it.

LAN
MAC address: 00:1F:FB:0C:55:1D

WAN
Type: DHCP
MAC address: 00:1F:FB:0C:55:1D


GreenPacket
Hardware model: WIXM-173
Firmware version: v1.5.9.1-g1.3.1-TSTT
Firmware creation date: Fri Dec 18 13:35:03 2009
Frequency range: 2500000KHz~2700000KH

System Status
Frequency: 2525000
Bandwidth: 10000
BSID: 00:98:24:10:3a:20
Dev State: Connected
Mac State: Normal
Uptime: 25954

Uplink
Modulation: 16-QAM [CTC] 3/4
Data rate: 0B/s
TX bytes: 67720679

Downlink
Modulation: QPSK [CTC] 1/2
Data rate: 0B/s
RX bytes: 1967226092

Service Flow

SFID CID State Direction Scheduling Max Rate ARQ HARQ
513 6291 active uplink BE 512000 0 1
512 6477 active downlink BE 1024000 0 1


Theres tonnes of other settings but i have absolutely no idea what to
make of it. Can some one help me please!!!

[Craig Sparks]

What differnt types of modulation do you have?

--
You received this message because you are subscribed to the Google Groups "wimax hacking" group.
To post to this group, send email to wimax-...@googlegroups.com.
To unsubscribe from this group, send email to wimax-hackin...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/wimax-hacking?hl=en.

[gsmg...@yahoo.com]

Can you share me the admins username and password privately?

thanks in advance

On Jan 8, 11:49 am, Craig Sparks <jackie.craig.spa...@gmail.com>
wrote:

> What differnt types of modulation do you have?
>

> wimax-hackin...@googlegroups.com<wimax-hacking%2Bunsu...@googlegroups.com>
> .

[Craig Sparks]

I never said I had that

On Jan 8, 2011 10:32 PM, "gsmg...@yahoo.com" <gsmg...@yahoo.com> wrote:

Can you share me the admins username and password privately?

thanks in advance

On Jan 8, 11:49 am, Craig Sparks <jackie.craig.spa...@gmail.com>
wrote:

> What differnt types of modulation do you have?
>

> On Jan 8, 2011 1:21 PM, "baby_boy_4u2nv" <baby_boy_4u...@hotmail.com> wrote:
>

> I'm wondering if ...

> wimax-hackin...@googlegroups.com<wimax-hacking%2Bunsu...@googlegroups.com>
> .
> For more options, visit this group athttp://groups.google.com/group/wimax-hacking?hl=en.

--

You received this message because you are subscribed to the Google Groups "wimax hacking" group.

To ...

[rakesh mukundan]

Hi..

Your downlink modulation is QPSK1/2 only, can you please share the received signal strength too?? As a quick remedy, you can increase you bandwidth by moving you modem to a place with better signal and or connect and externl antenna with reflector.
-----
Rakesh Mukundan
http://simplified-security.blogspot.com/

To unsubscribe from this group, send email to wimax-hackin...@googlegroups.com.

[Craig Sparks]

16qam is alright for uplink qpsk is crappy for downlink, idealy you want a 32qam for byour downlink and 16-32 for your uplink. Now you can have the best signal in the world and still have the modulation too low. Unless it autonegs dependant on the signal stregnth. So what rake said about doing a site survey with your modem in differnt spots will reveal that. And if it don't you might need to gain root on the modem to adjust those settings.

On Jan 9, 2011 5:14 AM, "rakesh mukundan" <rakes...@gmail.com> wrote:

Hi..

Your downlink modulation is QPSK1/2 only, can you please share the received signal strength too?? As a quick remedy, you can increase you bandwidth by moving you modem to a place with better signal and or connect and externl antenna with reflector.
-----
Rakesh Mukundan
http://simplified-security.blogspot.com/

On Sun, Jan 9, 2011 at 10:02 AM, gsmg...@yahoo.com <gsmg...@yahoo.com> wrote:
>

> Can you sha...

[Craig Sparks]

I just speaking off the top of my head but qpsk or bpsk is a protocol that is used while pathing in a antenna before 16-32qam can be negotiated. I'm wring all this from my phone. I cant get to the room where the router is to reset it.

On Jan 9, 2011 5:24 AM, "Craig Sparks" <jackie.cr...@gmail.com> wrote:

16qam is alright for uplink qpsk is crappy for downlink, idealy you want a 32qam for byour downlink and 16-32 for your uplink. Now you can have the best signal in the world and still have the modulation too low. Unless it autonegs dependant on the signal stregnth. So what rake said about doing a site survey with your modem in differnt spots will reveal that. And if it don't you might need to gain root on the modem to adjust those settings.

>
> On Jan 9, 2011 5:14 AM, "rakesh mukundan" <rakes...@gmail.com> wrote:
>
> Hi..
>

> Your downl...

[Anthony Rock]

I have one of those Green packet modems and I would like to hook it up
to an external antenna but there are no external connectors and the
unit seems to be sealed. How do I go about connecting it up to an
external antenna?

>> <wimax-hacking%2Bunsu...@googlegroups.com<wimax-hacking%252Buns...@googlegroups.com>

[Daniel Hückmann]

You should start by busting it open. Look for solder points marked tx/rx. Take some good pictures of the board and send them to the group.

Daniel Hückmann - Sophsec Intrusion Labs - Silicon Forest (PDX)
--------------------------------------------------------------------------
@sanitybit - https://www.google.com/profiles/sanitybit

[Romel Emperado]

you post a picture of your modem so that the group will have an idea..

---->thanks -- Mel  :) :) <-----
                                                   

[Tim Bach]

Can anyone help me with some of the newer firmware mifi units .

The ones that use nvtlconfig.bin.

I noticed it seems to have a ftp server and the config file is gibberish so i cant change it.

I would like to get shell access somehow.

I have a in particular a 4082 model that i want to gain access to.

 

 

[JovanSenpai]

So has anyone come up with anything yet? 

[Good Muyis]

i don't think you can alter anything unless you bypass the ISP cap ny
changing your MAC
By the which network are you using MTN or ......

--

Abubakar

[Ahwas Nasir]

Hey I can help u if it's too late

[Big Boss]

how would u do that exactly

On Thu, Oct 17, 2013 at 4:27 PM, Ahwas Nasir <ahw...@gmail.com> wrote:

Hey I can help u if it's too late

--
You received this message because you are subscribed to a topic in the Google Groups "wimax hacking" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/wimax-hacking/T1T6ZzjC564/unsubscribe.
To unsubscribe from this group and all its topics, send an email to wimax-hackin...@googlegroups.com.

To post to this group, send email to wimax-...@googlegroups.com.

Visit this group at http://groups.google.com/group/wimax-hacking.
For more options, visit https://groups.google.com/groups/opt_out.

--

Respect is the ultimate currency

Money = Control = Power & Knowledge = Power! Choose Your Route

[Warlock Horton]

On Friday, October 18, 2013 4:27:00 AM UTC+8, Ahwas Nasir wrote:

Hey I can help u if it's too late

sir im from the philippines and I have this modem can you email me the tut on how to crack this open. tnx in advance 

[Ahwas Nasir]

I was talking about boosting atenna ! Not hacking

[jerome pelayo]

pls send me details how to boost the antena.... pleaseeeee

On Sun, Nov 24, 2013 at 6:58 AM, Ahwas Nasir <ahw...@gmail.com> wrote:

I was talking about boosting atenna ! Not hacking

--
You received this message because you are subscribed to the Google Groups "wimax hacking" group.
To unsubscribe from this group and stop receiving emails from it, send an email to wimax-hackin...@googlegroups.com.

[Huawei Zte]

did you have email or yahoo id sir sanity?.. pls pm me.. thanks

Noong Biyernes, Pebrero 04 2011 07:08:25 UTC+8, si sanitybit ay sumulat:

>> > wimax-hackin...@googlegroups.com<wimax-hacking%2Bunsubscribe@googlegroups.com>

>> <wimax-hacking...@googlegroups.com<wimax-hacking%252Bunsubscribe@googlegroups.com>

>> >
>> > .
>> > For more options, visit this group athttp://
>> groups.google.com/group/wimax-hacking?hl=en.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "wimax hacking" group.
>> To post to this group, send email to wimax-...@googlegroups.com.
>> To unsubscribe from this group, send email to

>> wimax-hackin...@googlegroups.com<wimax-hacking%2Bunsubscribe@googlegroups.com>
>> .