Error in SUFI2_post.bat

[Dan Li]

Hi everyone 

When I run SWAT-CUP

It shows me this error massage:

Could Not Find *Sufi2.SwatCup\SUFI2.OUT\beh_*.*

NS=-26.026016

!ERROR simulation number 2 in variable file 1 is missing or has a problem.

How can fix it?

Thanks for any help.

[Abbaspour, Karim]

Probably the timing or the number of observed data points are not correct. Send extract definition files and the extract bat file to have a look...

--
You received this message because you are subscribed to the Google Groups "SWAT-CUP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to swat-cup+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Li Dan]

Thank Abbaspour, I have solved this issue.

--

—————————————————————————————————

Li Dan <li6...@gmail.com>

College of Environment and Natural Resources,
Zhejiang University.
Yuhangtang Road 866, Hangzhou
Zhejiang, China
Postcode:310058

[Micah Felix]

Can you please tell us how you did it? ㅜㅜ

[gebreme...@gmail.com]

Hi Friend would you share you Successes!

E:\ArcSWAT_1973\test1973.Sufi2.SwatCup>SUFI2_goal_fn.exe

Could Not Find E:\ArcSWAT_1973\test1973.Sufi2.SwatCup\SUFI2.OUT\beh_*.*

R²=0.022312

! ERROR Simulation number 2 in variable file 1 is missing or has a problem

 

E:\ArcSWAT_1973\test1973.Sufi2.SwatCup>SUFI2_new_pars.exe

Reading goal file

Simulation no 3 is missing from the goal.txt file

E:\ArcSWAT_1973\test1973.Sufi2.SwatCup>SUFI2_95ppu.exe

Finished reading observation file

Reading FLOW_OUT_1

Error! Simulation 1 has problems

Best, Gebremedhin

[Abbaspour, Karim]

You have some errors in your input files. Check the files in Echo for some leads…

--

[gebreme...@gmail.com]

Dear Dr. Karim

Thank you very much for your help! Here are my Echo files to have a look! Looking forward your valuable response!

Thanking you
Best, Gebremedhin!

[Abbaspour, Karim]

Too many observations! Leave some for validation!

Download SUFI2_extract_rch.exe from my ftp site

 

ftp.eawag.ch/outgoing/abbaspou

sign in as anonymous and give your email address as password

 

 

From: swat...@googlegroups.com [mailto:swat...@googlegroups.com] On Behalf Of gebreme...@gmail.com
Sent: Monday, February 09, 2015 7:57 AM
To: swat...@googlegroups.com
Cc: li6...@gmail.com
Subject: Re: Error in SUFI2_post.bat

 

Dear Dr. Karim

--

[gebreme...@gmail.com]

Dear Dr. Karim,
I thank you very much for your endless support! I have solved the problems running the SUFI2_post.bat with your great help but when I run 16 parameters with 100 simulations I got R2=0.13 and NSE= -0.03. I need your valuable suggestion

Thanking you
Gebremedhin

[Zeiger, Sean J. (MU-Student)]

Dear Gebremedhin,

NSE values less than 0.5 are not satisfactory at a monthly timestep (see Moriasi et al. 2007 for further information). 

Your min and max calibration parameter ranges need to be physically realistic for your watershed. 

I suggest studying the SWAT theoretical documentation. Get to know the equations of interest well. What are the calibration parameters? And, how does a small change in the calibration parameters effect model output?

Experiment with manually changing the calibration parameters in SWAT to find physically realistic min and max bounds for your watershed. Then, once you are very familiar with the model, let SWATcup auto calibration fine tune the sensitivity analysis/calibration/validation processes efficiently. 

Best of luck!
Sean

--

[gebreme...@gmail.com]

Dear Sean,
Thank you very much for your fast response! Yes you are right NSE <0.5 is not satisfactory. I am using a daily time step for the calibration.  Here are the initial parameter ranges

r__CN2.mgt                             -0.2    0.2
v__ALPHA_BF.gw                     0.0    1.0
v__GW_DELAY.gw                    0.0    500
v__REVAPMN.gw                      0.0    500
v__GW_REVAP.gw                    0.02   0.2
v__GWQMN.gw                         0.0    500
v__ESCO.hru                             0.0    1.0
v__EPCO.hru                             0.0    1.0
v__CANMX.hru                           0.0    10.0
r__SLSUBBSN.hru                    -0.1    0.1
v__CH_N2.rte                           -0.01   0.3
v__CH_K2.rte                            0.0    150.0
r__SOL_AWC (1).sol                 0.0    1.0
r__SOL_K (1).sol                      -0.2    0.2
r__SOL_Z (1).sol                       -0.2    0.2
v__SURLAG.bsn                        1       24

Thanking you
Best, Gebremedhin

On Friday, June 27, 2014 at 12:01:02 PM UTC+3, Dan Li wrote:

[Zeiger, Sean J. (MU-Student)]

Dear Gebremedhin,

Ultimately, you only want physically realistic numbers for your watershed.

I try not to change CN more than +\- 3 from the original values (+\- 5 at the most).

The Alpha_BF (baseflow recession coefficient) can be approximated manually using the formula for Alpha_BF in the theoretical documentation if you have a period of 10 or 15 consecutive days of observed streamflow without surface runoff inputs. Then, you can set a min/max boundary around your manually calculated estimation.

ESCO value of 1.0 is unrealistic. And, your SURLAG range it too vast.

Please look up the definition for each calibration parameter you plan to use for your calibration in the theoretical documentation to to improve understanding of the parameters enough to set realistic bounds.

Something else to simplify calibration, you may be able to calibrate using only 6-8 of the most sensitive parameters.

Hope that helps!
Sean

> On Feb 16, 2015, at 7:27 AM, "gebreme...@gmail.com" <gebreme...@gmail.com> wrote:
>
> Gebremedhin

[gebreme...@gmail.com]

Dear SEAN and SWAT CUP users
I have run the SWAT-CUP with 500 simulations with the parameters listed below (after first iteration). But still the R2 and NSE <0.5 as you can see below. Please help me to fix my problems.

r__CN2.mgt                0.245786     0.399240
v__ALPHA_BF.gw      -0.005631     0.195599
v__GW_DELAY.gw      349.815155   524.267395
v__REVAPMN.gw        200.659470   254.622787
v__GW_REVAP.gw      0.035327     0.072417
v__GWQMN.gw          1966.364624  2694.270264
v__ESCO.hru              0.648635     0.739781
r__SLSUBBSN.hru      0.642318     0.773152
v__CH_N2.rte              0.118820     0.183924
v__CH_K2.rte             109.668709   133.195999
r__SOL_AWC().sol    -0.247897     0.032307
r__SOL_K().sol           0.371455     0.774718
v__SURLAG.bsn        7.801311    14.019550

Goal_type= R2    No_sims= 30     Best_sim_no= 16    Best_goal = 2.206211e-001

Variable        p-factor  r-factor    R2      NS       bR2       MSE      SSQR    PBIAS     KGE      RSR    VOL_FR  ---  Mean_sim(Mean_obs)      StdDev_sim(StdDev_obs)
FLOW_OUT_1         0.78     0.46     0.22     0.19     0.0604   1.8e+003  4.5e+002 34.5     0.24     0.90   1.53        13.24(20.21)               27.12(46.50)

Best, Gebremedhin

[刘伟]

Dear Abbaspour,

I got the same error with Dan LI when I run SUFI2_post.bat.However,I couldnot find the problems in my input files.Could you help me to check with the attachments?Great thanks for help.

Best regards,

Wei Liu
在 2014年6月28日星期六 UTC+8下午1:34:43，Abbaspour写道：

[刘伟]

Dear Abbaspour,

  I found the mistake I made and solved the problem. Thank you very much!

Best regards,

Wei Liu

[Garee Khan]

Dear Abbaspour,

I got the error in SUFI2_post.bat when i run it. However,I could not find any problem in my input files. So could you help me to check the files. please attached herewith my files. I would be great full to you.

for error detail check the below screen short of my SUFI_post.bat file.

Kind regards,

Garee Khan

[Garee Khan]

Hi everyone 

When I run SWAT-CUP_post.bat

Its give an error :

Could Not Find *Sufi2.SwatCup\SUFI2.OUT\beh_*.*

NS=-00.463961

!ERROR simulation number 2 in variable file 1 is missing or has a problem.

How i can fix this error?

Please any one can help me.

I would be thanks to any one help me..

best regards,

On Friday, June 27, 2014 at 5:01:02 PM UTC+8, Dan Li wrote:

[vivian]

Dear Garee Khan, Did you already found the answer? I have the same problem

[Garee Khan]

Dear You can properly check your input files (flow data). most of the time this type of error occur due to problem in input data. other wise you can send me output folder of SWAT-Cup  i will check for you.

regards,

--
You received this message because you are subscribed to a topic in the Google Groups "SWAT-CUP" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/swat-cup/MWW-KVDRuvs/unsubscribe.
To unsubscribe from this group and all its topics, send an email to swat-cup+u...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

---

Garee Khan
PhD Scholar,
XIEG, Xinjiang, Urumqi, China
Phone: 0086 151-99037460
Email: gare...@gmail.com / gare...@yahoo.com

[vivian]

Thank you so much! I send it  you

[Garee Khan]

sorry, Yes Input files of SWAT-CUP

[kanishka Ganvir]

can u share how ?

[Avay Risal]

[Avay Risal]

I am having the same problem. I cannot find any error in my observed data. Can you please help how to get rid of this problem?

On Friday, June 27, 2014 at 4:01:02 AM UTC-5, Dan Li wrote:

[Karim Abbaspour]

timing and the number of data points are usually the problems. upload the input files so we can check, plus file.cio so we can check.

--

You received this message because you are subscribed to the Google Groups "SWAT-CUP" group.

To unsubscribe from this group and stop receiving emails from it, send an email to swat-cup+unsubscribe@googlegroups.com.

[Kingsley Nnaemeka Ogbu]

Dear Dr Abbaspour,
I got error when i run SUFI_Post.bat. Kindly help me fix it

[Kingsley Nnaemeka Ogbu]

I have SUFI_Post.bat error. I have atached my echo files for your help and advice

On Thursday, December 10, 2015 at 9:14:35 AM UTC+1, Wei Liu wrote:

[Karim Abbaspour]

In the extract reach file:

346

   347   348   349   350   351   352   353   354   355   356   357   358   359   360   361   362   363   364   365     0     0

     0     0     0     0     0     0     0     0

The zeros tell me there is something wrong with your observation file. Echo files echo what they read.

Karim

<echo_95ppu.txt>

<echo_95ppu_beh.txt>

<echo_extract_rch.txt>

<echo_goal_fn.txt>

<echo_LH_sample.txt>

<Echo_make_par.txt>

<echo_new_pars.txt>