--
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bun...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/1faff1d8-a50b-406b-9398-d29af132187cn%40googlegroups.com.
On Dec 3, 2022, at 2:41 PM, Doug H. <dhansf...@gmail.com> wrote:
I want to tap into the collective knowledge here. I need to adjust my Shimano Deore front derailer on my Clem. It looks to be aligned properly. Is it proper to tighten the cable when the chain is on the small ring and largest rear cog? Should the H and L screws be all the way screwed in when I start the adjustment? I was able to get it to shift but the low screw is pretty much all the way out so it just seems to be off in some way. And, after a couple of rides it seems to come back out of adjustment. Any advice would be most appreciated.Doug--
On Dec 3, 2022, at 5:00 PM, Joe Bernard <joer...@gmail.com> wrote:
Of course I forget something. The cable gets tightened down (after the L setting is done) with the shifter in its most forward position, the cable is let out as much as it will go.
--
You received this message because you are subscribed to a topic in the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/rbw-owners-bunch/CW1OytbGUr0/unsubscribe.
To unsubscribe from this group and all its topics, send an email to rbw-owners-bun...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/590c4b7e-2c14-4608-a5dc-b74abaea8b3bn%40googlegroups.com.
On Dec 3, 2022, at 6:11 PM, Joe Bernard <joer...@gmail.com> wrote:
Apologies to anyone who thinks I'm explaining the obvious, I've learned over the years to start at "explain everything, assume nothing" and it's served me well. And as I said in my first post, I'm probably doing it all wrong! 😬
To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/12777b60-0c9e-4951-8c3f-b8f3694fac2cn%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bun...@googlegroups.com.
To view this discussion on the web visit
On Dec 3, 2022, at 20:22, Joe Bernard <joer...@gmail.com> wrote:
I do what I can, Scott! Just don't ask me how to bleed hydraulic brakes or set sag on a suspension fork. I barely know what those words even mean 😬
To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/3c7229fd-2078-4ce1-8064-776050ee74b9n%40googlegroups.com.