Hi Daisy,
My first thought is for you to run two times, once with starting angle 0 at 256x256, then a second time with starting angle 45 at the larger size.
But if you need other angles, that will be tedious, and I suggest to crop them programmatically using Octave or python.
Greg
From: plast...@googlegroups.com <plast...@googlegroups.com>
On Behalf Of Daisy S
Sent: Tuesday, October 25, 2022 10:08 PM
To: Plastimatch <plast...@googlegroups.com>
Subject: [Plastimatch] Re: DRR generator angle question
External Email - Use Caution
--
You received this message because you are subscribed to the Google Groups "Plastimatch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
plastimatch...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/plastimatch/0765dbc1-2769-49fc-b9fb-72ab78b11984n%40googlegroups.com.
The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Mass General Brigham Compliance HelpLine at https://www.massgeneralbrigham.org/complianceline .
Please note that this e-mail is not secure (encrypted). If you do not wish to continue communication over unencrypted e-mail, please notify the sender of this message immediately. Continuing to send or respond to e-mail after receiving this message means you understand and accept this risk and wish to continue to communicate over unencrypted e-mail.
Thank yo Greg!My question would also be for drr: for different -r option in command line -- resolution of output Xray image, the different resolution settings would only lead to different size of same body part Xray image right?
You received this message because you are subscribed to a topic in the Google Groups "Plastimatch" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/plastimatch/75iO_Nda6Z8/unsubscribe.
To unsubscribe from this group and all its topics, send an email to plastimatch...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/plastimatch/1dd8e2e9-3365-4af2-9d80-6ec6d293105bn%40googlegroups.com.
Hi Daisy,
The drr options are terrible, by the way. I should make them easier to use.
The -r option is incorrectly documented in the help. It is the detector resolution in pixels, not in mm! You'll want to increase this by sqrt(2). But you'll need to round the result to get an integer.
You also need to set the -z option. Your detector size in mm should be scaled up the same way, rounding the result to get the same pixel size.
I think those are the only things you will need to change.
To view this discussion on the web visit https://groups.google.com/d/msgid/plastimatch/50fe1e5c-0b5e-43c0-b246-30b4b69964bfn%40googlegroups.com.