24mm pandafeeder

[Hai nguyen tien]

Hi everyone,

I just bought a pandaplacer and I'm trying to set up a 24mm feeder. There is one problem is that the action of the feeder is not strong enough to peel of the tape, is there any solution for this? 

Thank in advance.

[Tony Huynh]

Try switching to the metal MG90S engine to see if that improves things. Because one engine does two jobs, it puts a lot of stress on it.

AFARCO ELECTRONIC - AUTOMATIC COMPANY LIMITED 

• Address: 279 DX070 Road, Chanh Hiep Ward, Ho Chi Minh City, Vietnam
• Phone: +84 989 941 355
• Taxcode: 3703047293                             

Vào 01:52 CN, 14 Th12, 2025 'Hai nguyen tien' via OpenPnP <ope...@googlegroups.com> đã viết:

Hi everyone,

I just bought a pandaplacer and I'm trying to set up a 24mm feeder. There is one problem is that the action of the feeder is not strong enough to peel of the tape, is there any solution for this? 

Thank in advance.

--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/openpnp/b225fa7d-acb0-4da8-abbc-71e7aafef4fen%40googlegroups.com.

[Artem Stanchak]

I have these autofeeders, and they work well.

24mm autofeeder

неділя, 14 грудня 2025 р. о 04:09:01 UTC+2 Tony Huynh пише:

[Tony Huynh]

I think the 0816 Feeder is better at stripping 24mm tape; it has two separate motors.

AFARCO ELECTRONIC - AUTOMATIC COMPANY LIMITED 

• Address: 279 DX070 Road, Chanh Hiep Ward, Ho Chi Minh City, Vietnam
• Phone: +84 989 941 355
• Taxcode: 3703047293                             

Vào 18:56 CN, 14 Th12, 2025 Artem Stanchak <tyom...@gmail.com> đã viết:

To view this discussion visit https://groups.google.com/d/msgid/openpnp/3fd741be-3456-41bf-94bb-777624fb488en%40googlegroups.com.

[Ergomech Sales]

Just tried the 0816 feeders, works well, I guess I'll use this instead for the 24mm

You received this message because you are subscribed to a topic in the Google Groups "OpenPnP" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/openpnp/UDLqTwvgJkE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to openpnp+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/openpnp/CAOP%2B87%2BiFiYs%2Bzfn-nsKyHRP9T1-yWZqvi4jBEqKWf1Y%2Beebqw%40mail.gmail.com.