> Was there any change to the camera setup?
It depends what the last version was. 😅 There is a relatively new solution that tries to calibrate manual exposure. Maybe there is a bug.
First, make sure to enable Trace logging in the Log
tab.
Then go to Machine Setup, find the camera in question, go to the Device Settings tab, and enable the Auto checkbox on Exposure:
https://github.com/openpnp/openpnp/wiki/OpenPnpCaptureCamera#camera-properties
Does that fix the camera exposure?
If yes:
Go to Issues & Solution, press Find Issues & Solutions.
Find the "The exposure of camera Bottom should not be set to Auto" solution.
Follow the instructions and press Accept.
Report what happens. Does it set the camera to all white?
If no:
The you need to disable Auto again.
On the camera view, right-click and select Show Image Info?
Make sure the camera is aimed at a representative subject (with bright elements).
Try to manually set the Exposure right.
Report back here.
_Mark
--
You received this message because you are subscribed to a topic in the Google Groups "OpenPnP" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/openpnp/9yd8rf2Rmsk/unsubscribe.
To unsubscribe from this group and all its topics, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/7b4680e5-2dcf-41b5-9548-3d20961095a0n%40googlegroups.com.