Shutdown button

[Danno]

Does MotioneyeOS support  dtoverlay=gpio-shutdown,gpio_pin=3 for a shutdown/power up button?

[StarbaseSSD]

Dunno, never tried it. Does it go to ground or +3.3v or +5v

[StarbaseSSD]

Just tried on a PiZeroW, added the line

dtoverlay-gpio-shutdown

to config.txt (and tried it with gpio pin 3 and the other options, too)

BTW, GPIO pin 3 is really physical pin 5, but could not get it to work on a PiZeroW with motionEyeOS dev20201026

When I free up a Pi3B_ later today, I'll try it there, too.

[StarbaseSSD]

Unfortunately, even tho the dtb files are in the /boot/overlays files, it doesn't work with the default settings. I may try it later with a different GPIO pin, but it doesn't work with the defaults. There are a lot of python scripts out there that may work with a different GPIO pin, but I don't know if/when I'll be able to test.

[Olaf Schultchen]

StarbaseSSD, did you (or someone else) sucessfully tested some other GPIO pins? I am also looking for a possibility to install a physical shutdown/power up button for my RPi 3 with motioneyeOS.

Thanks for your effort

Regards 

Olaf 

[Dan Roman]

Hi Olaf,

I used the instructions from this post and it works fine.

https://groups.google.com/g/motioneye/c/T1_ma8jFEeM

Dan

--
You received this message because you are subscribed to a topic in the Google Groups "motioneye" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/motioneye/QpSeLhQe0AY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to motioneye+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/motioneye/ad74b908-e2f4-4f56-8bac-50ca6934c307n%40googlegroups.com.

--

Dan Roman

gdan...@gmail.com