Error code: OLE 80131700

[Gian Luca Grassi]

Hi! Running the software using the license of my university on my pc it comes out this error: OLE 80131700. Do you know why? How can i solve this problem?

[ashutosh singh]

which software!

GMS, Flex, classic, modelmuse. pmwin ....

hpc

On Tue, Jun 14, 2016 at 9:03 AM, Gian Luca Grassi <grassi...@gmail.com> wrote:

Hi! Running the software using the license of my university on my pc it comes out this error: OLE 80131700. Do you know why? How can i solve this problem?

--
You received this message because you are subscribed to the Google Groups "MODFLOW Users Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to modflow+u...@googlegroups.com.
To post to this group, send email to mod...@googlegroups.com.
Visit this group at https://groups.google.com/group/modflow.
For more options, visit https://groups.google.com/d/optout.

[Richard Winston]

That sounds like the software isn't installed correctly. 

[Gian Luca Grassi]

Visual MODFLOW Classic

[Ashutosh]

It can be related to installation. Also try removing alphabets like ä, å, ú etc from paths and folders where the vmf file exists.

Hpc

Sent from my iPhone

[jul...@hidrodinamicaconsult.com.br]

Hi, Gian Luca,

Were you able to solve this problem?

I am having excetly the same issue.

Thank you,

Juliana

[Melissa Bunn]

Hi Juliana,

Have you been able to resolve this issue? I am the first in my organization to install on Windows 10, and running into the same issue.

Thank you

Melissa

[Juliana Baitz]

Hi, Melissa! Yes, I resolved this by downloading  .NET Framework correct for the version of Visual Modflow I was using (check the system requirements and make sure the correct .NET Framework is in your system). I checked and some version was missing in the system for Windows 10.

I hope that works for you too.

Cheers,

Juliana

Juliana Baitz

Hidrodinamica Consultoria

jul...@hidrodinamicaconsult.com.br

Cel.: +55-11-95774-4241

--
You received this message because you are subscribed to a topic in the Google Groups "MODFLOW Users Group" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/modflow/dO9uy0a4p7g/unsubscribe.
To unsubscribe from this group and all its topics, send an email to modflow+unsubscribe@googlegroups.com.

[Melissa Bunn]

Thank you so much for your response Juliana. That resolved my issue as well. I was beginning to panic that I would need to transition to FLEX.

Many Thanks.

Melissa

On Aug 15, 2017 10:50 AM, "Juliana Baitz" <jul...@hidrodinamicaconsult.com.br> wrote:

Hi, Melissa! Yes, I resolved this by downloading  .NET Framework correct for the version of Visual Modflow I was using (check the system requirements and make sure the correct .NET Framework is in your system). I checked and some version was missing in the system for Windows 10.

I hope that works for you too.

Cheers,

Juliana

Juliana Baitz

Hidrodinamica Consultoria

juliana@hidrodinamicaconsult.com.br

Cel.: +55-11-95774-4241

2017-08-15 9:08 GMT-03:00 Melissa Bunn <bunnm...@gmail.com>:

Hi Juliana,

Have you been able to resolve this issue? I am the first in my organization to install on Windows 10, and running into the same issue.

Thank you

Melissa

--
You received this message because you are subscribed to a topic in the Google Groups "MODFLOW Users Group" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/modflow/dO9uy0a4p7g/unsubscribe.
To unsubscribe from this group and all its topics, send an email to modflow+unsubscribe@googlegroups.com.
To post to this group, send email to mod...@googlegroups.com.
Visit this group at https://groups.google.com/group/modflow.
For more options, visit https://groups.google.com/d/optout.

[Juliana Baitz]

You are welcome! I am glad that worked for you too!!

I know I panicked when that happened to me! :)

Cheers,

Juliana

Em ter, 15 de ago de 2017 às 23:09, Melissa Bunn <bunnm...@gmail.com> escreveu:

Thank you so much for your response Juliana. That resolved my issue as well. I was beginning to panic that I would need to transition to FLEX.

Many Thanks.

Melissa

On Aug 15, 2017 10:50 AM, "Juliana Baitz" <jul...@hidrodinamicaconsult.com.br> wrote:

Hi, Melissa! Yes, I resolved this by downloading  .NET Framework correct for the version of Visual Modflow I was using (check the system requirements and make sure the correct .NET Framework is in your system). I checked and some version was missing in the system for Windows 10.

I hope that works for you too.

Cheers,

Juliana

Juliana Baitz

Hidrodinamica Consultoria

jul...@hidrodinamicaconsult.com.br

Cel.: +55-11-95774-4241

2017-08-15 9:08 GMT-03:00 Melissa Bunn <bunnm...@gmail.com>:

Hi Juliana,

Have you been able to resolve this issue? I am the first in my organization to install on Windows 10, and running into the same issue.

Thank you

Melissa

--
You received this message because you are subscribed to a topic in the Google Groups "MODFLOW Users Group" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/modflow/dO9uy0a4p7g/unsubscribe.

To unsubscribe from this group and all its topics, send an email to modflow+u...@googlegroups.com.

To post to this group, send email to mod...@googlegroups.com.
Visit this group at https://groups.google.com/group/modflow.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to a topic in the Google Groups "MODFLOW Users Group" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/modflow/dO9uy0a4p7g/unsubscribe.

To unsubscribe from this group and all its topics, send an email to modflow+u...@googlegroups.com.

To post to this group, send email to mod...@googlegroups.com.
Visit this group at https://groups.google.com/group/modflow.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to a topic in the Google Groups "MODFLOW Users Group" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/modflow/dO9uy0a4p7g/unsubscribe.

To unsubscribe from this group and all its topics, send an email to modflow+u...@googlegroups.com.

To post to this group, send email to mod...@googlegroups.com.
Visit this group at https://groups.google.com/group/modflow.
For more options, visit https://groups.google.com/d/optout.

--

Dra. Juliana Baitz
Hidrogeológa
NOVO/ NEW Cel. +55-11-95774-4241

[Siva Sankar]

Tell me the version of .NET Framework because I am also facing the same problem while opening Classic

On Tuesday, August 15, 2017 at 8:20:24 PM UTC+5:30, Juliana Baitz wrote:

Hi, Melissa! Yes, I resolved this by downloading  .NET Framework correct for the version of Visual Modflow I was using (check the system requirements and make sure the correct .NET Framework is in your system). I checked and some version was missing in the system for Windows 10.

I hope that works for you too.

Cheers,

Juliana

Juliana Baitz

Hidrodinamica Consultoria

jul...@hidrodinamicaconsult.com.br

Cel.: +55-11-95774-4241

2017-08-15 9:08 GMT-03:00 Melissa Bunn <bunnm...@gmail.com>:

Hi Juliana,

Have you been able to resolve this issue? I am the first in my organization to install on Windows 10, and running into the same issue.

Thank you

Melissa

--
You received this message because you are subscribed to a topic in the Google Groups "MODFLOW Users Group" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/modflow/dO9uy0a4p7g/unsubscribe.

To unsubscribe from this group and all its topics, send an email to modflow+u...@googlegroups.com.

[Juliana Baitz]

Hi, Siva,
You have to check what are the requirements for the version of Modflow Classic you are using. Depends on your version.
It should be listed in System Requirements. And then make sure the correct version is installed in your computer.
Hope this helps.
Cheers,

[Pawan Kumar Neupane]

After installing the software, it will ask for the required .net framework which you can install from Microsoft site. Then it will start working.

Thank you

You received this message because you are subscribed to the Google Groups "MODFLOW Users Group" group.

To unsubscribe from this group and stop receiving emails from it, send an email to modflow+u...@googlegroups.com.

To post to this group, send email to mod...@googlegroups.com.
Visit this group at https://groups.google.com/group/modflow.
For more options, visit https://groups.google.com/d/optout.

--

Regards 

Pawan K Neupane

Scientific Officer

NAST-NCCKMC

Cell no: 9841309168