Woman InMoov

[Alberto Tudela Roldán]

Hi, I wondered if it is possible to modify InMoov to look like a femenine version.

Thanks

[Christophe Carrano]

Moi aussi je pense que ca ferais encore plus de suces.

[Scott Peal]

Me too! If no one has modified parts by the time I start face and chest parts, I will attempt to design and post back to community.

[ChuckW]

Hi Scott,

I'm working on a Female version of InMoov, it takes a lot of work to scale everything down, and then find servos that fit and work right without loosing strength. As soon as I get far enough alone to show real progress, I'll post some of the Modifications with Pictures.  I only have the head completed at this time.

On Thursday, September 25, 2014 6:45:06 PM UTC-5, Scott Peal wrote:

[mechw...@gmail.com]

Hi ChuckW

We are designing a Female InMoov and we have already started facing lots of problems in the STL file, due to restrictions in modifications. Were you successful to build an entire female InMoov? It would be very helpful if you could share some designs or modifications. We require the female InMoov for our exhibition and it is very important to have a female InMoov.
Hoping to hear from you soon.

[Sam]

Mon robot est féminin, j'ai retravaillé pas mal de pièces, machoire, visage, buste, caches épaules...
Je ne sais pas mettre des photos ici donc je met les liens.

http://inmoov.fr/wp-content/uploads/2018/04/SPhotoEditor-20180419_203506-769x1025.jpg


http://inmoov.fr/wp-content/uploads/2018/04/SPhotoEditor-20180419_203506-769x1025.jpg

[Dominiek Leliaert]

Sam, Are you willing to share your files?

I would consider to make a couple (male/female).

[snake00jap]

Hi Sam, 

I have just open a qustion related to that here : 

https://groups.google.com/forum/#!topic/inmoov/M0LE-pV50bw

So please can you help, I just want to know how did you to skin the head ? Silicone ? You maked a mold ? How did you do to mount it in the head structure ? It it possible to do that for other part like torso, arms... ? Did you notice exessive heat ?

Thank you for your help !

[Paul Hines]

Hello Sam this Paul again. Just wanted to check in with you to make sure you got my message about your female inmoov. I was hoping you mind sharing the stl files for her. This is perfect for what. I'm doing in our home. We have a smart home which has a females voice but I want to give her a body and to really a automusous humnoid for our home. My email is reddrag...@gmail.com and again very awesome by the way yours truly paul

[Pierluigi Barbieri]

Females create always a lot of problem ! :)

--
You received this message because you are subscribed to the Google Groups "InMoov" group.
To unsubscribe from this group and stop receiving emails from it, send an email to inmoov+un...@googlegroups.com.
To post to this group, send email to inm...@googlegroups.com.
Visit this group at https://groups.google.com/group/inmoov.
For more options, visit https://groups.google.com/d/optout.

[Egil Bernt]

Wanna share the stl`s ?

[Thomas Messerschmidt]

Of course it is. I have done a scaling of the hands. Not hard, but will take a very  long time.

[Aaron Campbell]

Is anyone able to share .stl files? 

[Aaron Campbell]

would you be able to send me the .stl files or the location of where these are.

thanks

[Marcos Barraza]

feminism in inmoov, please don't

--

You received this message because you are subscribed to the Google Groups "InMoov" group.
To unsubscribe from this group and stop receiving emails from it, send an email to inmoov+un...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/inmoov/564a997b-8477-4fdf-bf62-96e7777b890a%40googlegroups.com.

--

Saludos

Marcos Barraza Urquidi

[The Forever Homestead]

Hello, I have been looking to do something like this as well.  Has anyone created a female bust plate for the InMoov yet.  Willing to share files?

[Gmail]

I use a silicone rubber chest plate, easily purchased from Amazon.com. Then again, my “fembot” is meant to look very human. 

By the way you should check out Alan Timm’s “Grey” robot. He has significantly upgraded the pushrods that control the head. 

Thomas

-

Want to learn more about ROBOTS?

https://www.youtube.com/user/thomasfromriverside

On Mar 29, 2021, at 3:37 PM, The Forever Homestead <ki...@theforeverhomestead.com> wrote:

Hello, I have been looking to do something like this as well.  Has anyone created a female bust plate for the InMoov yet.  Willing to share files?

You received this message because you are subscribed to a topic in the Google Groups "InMoov" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/inmoov/b82E1fd1gR8/unsubscribe.
To unsubscribe from this group and all its topics, send an email to inmoov+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/inmoov/d0e70222-9f74-4756-b6d0-61f82fe017dcn%40googlegroups.com.