FS: Smith medium duty brazing O/A regulators + flashback arrestors
Ethan Labowitz
Hi FBs-
These are "brazing" regs because the oxygen reg's low-pressure gauge only reads up to 30 PSI, rather than 60+ PSI on a typical general-purpose oxy reg gauge. Makes fine oxy adjustments a lot easier.
Includes regulator-mounted flashback arrestors. Used but not a ton, mostly been sitting in boxes since I bought them probably 6 or 7 years ago.
https://www.dropbox.com/s/kx8516r1dcn4jat/2016-04-08%2000.11.14.jpg?dl=0
https://www.dropbox.com/s/bkr7oelxg2538rx/2016-04-08%2000.11.16.jpg?dl=0
https://www.dropbox.com/s/nc2pqwqo2vgr5fe/2016-04-08%2000.11.22.jpg?dl=0
https://www.dropbox.com/s/i246anjghhx8b9q/2016-04-08%2000.11.24.jpg?dl=0
https://www.dropbox.com/s/vmpaokujzkcaa7i/2016-04-08%2000.11.39.jpg?dl=0
https://www.dropbox.com/s/ipiyni4b9mb4lug/2016-04-08%2000.11.43.jpg?dl=0
Guy Washburn
Ethan Labowitz
These are sold anyway, sorry
--
--
You received this message because you are subscribed to the Google
Groups "Framebuilders" group.
Searchable archives for this group can be found at http://groups.google.com/group/framebuilders (recent content) and http://search.bikelist.org (older content).
To post to this group, send email to frameb...@googlegroups.com
To unsubscribe from this group, send email to
framebuilder...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/framebuilders?hl=en
---
You received this message because you are subscribed to the Google Groups "Framebuilders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to framebuilder...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.