Problem with setting up layers (Height, lower temp and upper temperature)

[ruben....@gmail.com]

Dear colleagues,

I am working with Pyrosim 2020 and found a problem with setting up layers. In the previous version 2018, suppose I had a room of 2,75 mts height so the layer was set up as zmin=0, zmax=2,75. 

NOw if I do the same the graphics of smoke height and upper temp, are inconsistent and show for instance negative temperatures!!!!

I cannot find the problem. Could any of you advice me about?

Kind regards,

Ruben

[Kevin McGrattan]

I suggest you look at the actual .fds file that PyroSim creates and determine if it is appropriate and consistent with what is in the FDS User's Guide.

[FIASCHI Ruben Claudio]

Kevin

Thank you very much for your swift answer. 
I got the file.fds but cannot open it. Should I have to download any software to open it?

Regards

Ruben

El lun, 25 ene 2021 a las 17:26, Kevin McGrattan (<mcgr...@gmail.com>) escribió:

I suggest you look at the actual .fds file that PyroSim creates and determine if it is appropriate and consistent with what is in the FDS User's Guide.

--
You received this message because you are subscribed to a topic in the Google Groups "FDS and Smokeview Discussions" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/fds-smv/KTrSop3Vc9E/unsubscribe.
To unsubscribe from this group and all its topics, send an email to fds-smv+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/CAAJimDFM_unwdFExhMBL1J5wRTLUkZWLAk98eJdZcuAM5-UQpw%40mail.gmail.com.

[Kevin McGrattan]

It is a text file. Open it with a text editor like Wordpad or Notepad.