Supports for Windows Phone 8 and Surface Pro

[Mamadou]

Hello,

We're proud to announce supports for Microsoft Windows Phone 8 and Surface Pro starting Doubango revision 820.
We loved coding on these operating systems and are happy to share the code source with you.
The Surface Pro version supports all Doubango features while only core functions are included in Windows Phone 8.
Core functions include:
- Audio (G.711, Speex and G.722)
* AEC, Noise suppression, AGC, Adaptive jitter buffer...
* Change routing (Earpiece, Speaker or Bluetooth)
- Video (H.264). Thanks to the OS
* Camera switching (Back/Front)
- Multitasking using Push Notifications (complete documentation coming soon)
- Call Hold/Resume

Project Home Page:http://code.google.com/p/boghe/
Building source code:http://code.google.com/p/boghe/wiki/Building_Boghe_v2_wp8

Regards,

[Tayeb Meftah]

Congratulation

Envoyé de mon iPhone

> --
> You received this message because you are subscribed to the Google Groups "discuss-doubango" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>

[Muhammad Shahzad]

Congrats and many thanks. It was much needed port.

I have successfully compiled it in a virtual machine however i am unable to launch the emulator, perhaps because of CPU features missing in VM. I will try it on a spare (real) machine tomorrow.

Thank you.

--
You received this message because you are subscribed to the Google Groups "discuss-doubango" group.

To unsubscribe from this group and stop receiving emails from it, send an email to doubango+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85
MSN: shari...@hotmail.com
Email: shahe...@googlemail.com

[Mamadou]

To run the simulator you'll need a machine with supports for HyperT

On Feb 19, 1:32 am, Muhammad Shahzad <shaherya...@gmail.com> wrote:
> Congrats and many thanks. It was much needed port.
>
> I have successfully compiled it in a virtual machine however i am unable to
> launch the emulator, perhaps because of CPU features missing in VM. I will
> try it on a spare (real) machine tomorrow.
>
> Thank you.
>
>
>
>
>
>
>
>
>
> On Mon, Feb 18, 2013 at 4:58 AM, Mamadou <diopmama...@doubango.org> wrote:
> > Hello,
>
> > We're proud to announce supports for Microsoft Windows Phone 8 and Surface
> > Pro starting Doubango revision 820.
> > We loved coding on these operating systems and are happy to share the code
> > source with you.
> > The Surface Pro version supports all Doubango features while only core
> > functions are included in Windows Phone 8.
> > Core functions include:
> >  - Audio (G.711, Speex and G.722)
> >      * AEC, Noise suppression, AGC, Adaptive jitter buffer...
> >      * Change routing (Earpiece, Speaker or Bluetooth)
> >  - Video (H.264). Thanks to the OS
> >      * Camera switching (Back/Front)
> >  - Multitasking using Push Notifications (complete documentation coming
> > soon)
> >  - Call Hold/Resume
>

> > Project Home Page:http://code.google.com/p/**boghe/<http://code.google.com/p/boghe/>
> > Building source code:http://code.google.com/p/**
> > boghe/wiki/Building_Boghe_v2_**wp8<http://code.google.com/p/boghe/wiki/Building_Boghe_v2_wp8>

>
> > Regards,
>
> > --
> > You received this message because you are subscribed to the Google Groups
> > "discuss-doubango" group.
> > To unsubscribe from this group and stop receiving emails from it, send an

> > email to doubango+unsubscribe@**googlegroups.com<doubango%2Bunsubscribe@googlegroups .com>
> > .
> > For more options, visithttps://groups.google.com/**groups/opt_out<https://groups.google.com/groups/opt_out>
> > .

>
> --
> Muhammad Shahzad
> -----------------------------------
> CISCO Rich Media Communication Specialist (CRMCS)
> CISCO Certified Network Associate (CCNA)
> Cell: +49 176 99 83 10 85

> MSN: shari_78...@hotmail.com
> Email: shaherya...@googlemail.com

[Ankur]

Hello Sir,

             Please let me know which windows phone device you have used to install application successfully. 
             Thanks in advance
                                                                                    Thanks and Regards
                                                                                     Ankur Singh

On Tuesday, February 19, 2013 2:42:15 PM UTC-8, Jose Maria Gabaldon wrote:

Hi,

I was able to compile and install in my phone, this is a great first approach:

- I was able to log in with my iptel.org sip account
- I was able to make sip calls in the iptel.org network
- I was able to receive sip calls from the iptel.org network while the app is in foreground

The only issue I found is that seems that Windows Push Notifications are not working thus sip calls are not received when the app is not in foreground.

I hope you can help me find the way to use the app in the backgroud,

I hope I can help you troubleshoot the app,

Thanks for your great job!

Regards,

[Jose Maria Gabaldon]

Hi,

I'm using a Nokia Lumia 920.

Regards,

Enviado desde mi Windows Phone

---

De: Ankur
Enviado el: 23/02/2013 01:39 a. m.
Para: doub...@googlegroups.com
Asunto: [Doubango] Re: Supports for Windows Phone 8 and Surface Pro

To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.

[Mamadou]

How did you get your vs_2012?

On 2/25/2013 7:29 AM, rosebenningt...@gmail.com wrote:

Hello Sir,

             I have installed the Microsoft Visual studio 2012 and Windows 8 and also have downloaded the new source code of Windows Phone 8. But when i'm going to open the project by clicking on boghe-wp8.sln file, it is showing me the message that this project is incompatible with the current edition of visual studio. Only BackEnd and BackEndProxyStub projects is loading successfuly. Rest of the projects (Agents, BogheCore, BogheWp8, Boghe Xdm and Doubango)is not loading  What should i do?
Thanks in Advance
                                                                                                                    Thanks and Regards
                                                                                                                    Rose Bennington 

[Jose Maria Gabaldon]

Hi,

 

I was able to compile and use the app on my Lumia 920. However push notifications for incoming calls is not working.

 

Is there something I can do to make it work?

 

Thanks in advance for your comments,

 

Regards,

--
José María Gabaldón

[Mamadou]

as mentioned on the initial post, this part is not documented yet.
If you check your SIP requests, you'll notice there are Push Notifications Uris. Looking into the code, should be easy to figure out how to send PN messages.

[Mamadou]

You probably don't have up2date code: https://code.google.com/p/boghe/source/browse/branches/2.0/boghe/doubango/doubango.csproj
What's the svn revision?
You can also try to remove it from the solution and add it again

On 2/26/2013 7:46 AM, aditya yadav wrote:

Hello Sir,

              All of the projects are opened successfuly but only doubango is not loaded. It is showing the message that doubango.csproj has been moved, renamed or is not on your computer. But it is available on correct place Can anyone tell me why doubango is not loaded?  
             Thanks in Advance
             Aditya Kumar                                        

On Monday, 25 February 2013 11:59:57 UTC+5:30, rosebenningt...@gmail.com wrote:

Hello Sir,

             I have installed the Microsoft Visual studio 2012 and Windows 8 and also have downloaded the new source code of Windows Phone 8. But when i'm going to open the project by clicking on boghe-wp8.sln file, it is showing me the message that this project is incompatible with the current edition of visual studio. Only BackEnd and BackEndProxyStub projects is loading successfuly. Rest of the projects (Agents, BogheCore, BogheWp8, Boghe Xdm and Doubango)is not loading  What should i do?
Thanks in Advance
                                                                                                                    Thanks and Regards
                                                                                                                    Rose Bennington 

On Sunday, February 17, 2013 7:58:19 PM UTC-8, Mamadou wrote:

[aditya yadav]

Hello Sir,

Thanks for the reply!! According to you i have downloaded the complete code again and now project is being loaded successfully  But when i'm going to compile the project it is giving me following errors..

Error 1 error C2039: 'dtls' : is not a member of 'trtp_manager_s' H:\MyBoghe\doubango\branches\2.0\doubango\tinyRTP\src\trtp_manager.c 1542 1 BackEnd

Error 2 error C2039: 'dtls' : is not a member of 'trtp_manager_s' H:\MyBoghe\doubango\branches\2.0\doubango\tinyRTP\src\trtp_manager.c 1543 1 BackEnd

Error 8 error LNK1120: 2 unresolved externals H:\MyBoghe\boghe\branches\2.0\boghe\Release\BackEndProxyStub\doubango_rt.BackEndProxyStub.dll BackEndProxyStub

Error 6 error LNK2001: unresolved external symbol _doubango_rt2EBackEnd_ProxyFileInfo H:\MyBoghe\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

Error 7 error LNK2001: unresolved external symbol _doubango_rt2EBackEnd2EOutOfProcess_ProxyFileInfo H:\MyBoghe\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

Error 9 Metadata file 'H:\MyBoghe\boghe\branches\2.0\boghe\doubango\winrt\Bin\x86\Release\doubango.dll' could not be found H:\MyBoghe\boghe\branches\2.0\boghe\boghe-core\CSC boghe-core-rt

Error 3 Metadata file 'H:\MyBoghe\boghe\branches\2.0\boghe\Release\BackEnd\doubango_rt.BackEnd.winmd' could not be found H:\MyBoghe\boghe\branches\2.0\boghe\winrt\Agents\CSC Agents

Error 5 Metadata file 'H:\MyBoghe\boghe\branches\2.0\boghe\Release\BackEnd\doubango_rt.BackEnd.winmd' could not be found H:\MyBoghe\boghe\branches\2.0\boghe\doubango\winrt\CSC doubango

Error 11 Metadata file 'H:\MyBoghe\boghe\branches\2.0\boghe\Release\BackEnd\doubango_rt.BackEnd.winmd' could not be found H:\MyBoghe\boghe\branches\2.0\boghe\boghe-core\CSC boghe-core-rt

Error 4 Metadata file 'H:\MyBoghe\boghe\branches\2.0\boghe\winrt\Agents\Bin\x86\Release\doubango_rt.Agents.dll' could not be found H:\MyBoghe\boghe\branches\2.0\boghe\doubango\winrt\CSC doubango

Error 10 Metadata file 'H:\MyBoghe\boghe\branches\2.0\boghe\winrt\Agents\Bin\x86\Release\doubango_rt.Agents.dll' could not be found H:\MyBoghe\boghe\branches\2.0\boghe\boghe-core\CSC boghe-core-rt

Error 12 The command "xcopy /Q /Y "H:\MyBoghe\boghe\branches\2.0\boghe\Release\BackEndProxyStub\doubango_rt.BackEndProxyStub.dll" "H:\MyBoghe\boghe\branches\2.0\boghe\Boghe-wp8"" exited with code 4. Boghe-wp8

How can i solve these problems... Please reply as soon as posible...
It would be very kind of you.. Thanks in advance

[aditya yadav]

Hello Sir,

Thanks for the reply!! According to you i have downloaded the complete code again and now project is being loaded successfuly. But when i'm going to compile the project it is giving me following errrors..

[akmal khan]

Can any one please tell me how to install it from zero, i dont know about it much

[Arslan Pervaiz]

Hi Doubango Team,

First of all congratulation and many thanks for porting Doubango for Windows Phone 8 And Windows 8 RT. I have tested SIP calls and video calls as well on my Windows Phone 8 Device Lumia 920. And It Works Fine For Me For Audio Calls And Video Calls. I Really Wana Pay My Gratitude To Doubango Team on This Success. Now I Am Trying To Add Doubango In My Existing Project For Testing. I Added Backend And BackEndStub Project That Is Actually Native C++ Projects And Adding Others Projects Too. But I Am Facing Problem When I Try To Compile The Project After Merging In My Existing Project. It Gives Some Error For WMAppManifest.xml for parsing. When I Saw This File There Are Many References in it. Can You Please Explain Some Steps To Add Into Existing Project Like Which Events And Register We Need To Register. It Will Be Kind Favor From Your Side If You Can Explain Some Steps.

Thanks In Advance.

Regards,
Arslan Pervaiz

[Mamadou]

@aditya yadav
You're right, the latest Doubango revision has unguarded DTLS code.
You can move it to the above block or just update your code to svn
r828[1].

@akmal khan
This is a product for developers. Building and installing the product
is as simple as "pressing Run".

@Arslan Pervaiz
You must not try to edit "WMAppManifest.xml" by yourself. "BackEnd" is
a COM project and building it will generate the idl files and from
these files the ProxyStub DLL.
The generation will also update the manifest file with the BackEnd
agents, COM interfaces... This is how WP8 works if you want to
integrate native code in C# because P/Invoke is not supported.
Instead of trying to change the manifest by yourself you have to edit
the custom Build script[2]

[2] Right click on "BackEnd" -> Properties -> Custom Build Step ->
General -> "Command Line" and "Outputs"
[1] https://code.google.com/p/doubango/source/diff?spec=svn828&r=828&format=side&path=/branches/2.0/doubango/tinyRTP/src/trtp_manager.c

[Ojas Sinha]

Hi,

Has anybody tried messaging system ? Can you tell me if it is present in code sample ?

[aditya yadav]

@Mamadou
Hello Sir, 
             Thanks a lot for your reply and many congratulation for porting doubango for Windows Phone 8. I have updated my code according to you with the help of 

             following links.

             https://code.google.com/p/doubango/source/detail?r=828
             https://code.google.com/p/doubango/source/diff?spec=svn828&r=828&format=side&path=/branches/2.0/doubango/tinyRTP/src/trtp_manager.c

             Now my code is working fine and the emulator is also working successfully. i have also tested sip calling, Voice calling is working fine but video is not. I   

             have the Nokia Lumia 920 Windows 8 phone device. I want to install this application in this device for video calling. Please tell me which application file 

             i have to install in the device. I will be highly obliged for this kind action of yours.
             Thanks in advance
                                                             Regards
                                                             Aditya Yadav

[JOHAN LANTZ]

Awesome. Out of curiosity, is the audio drivers using native api or a .NET
api?

/Johan

El 18/02/13 04:58, "Mamadou" <diopm...@doubango.org> escribió:

>--
>You received this message because you are subscribed to the Google Groups
>"discuss-doubango" group.
>To unsubscribe from this group and stop receiving emails from it, send an
>email to doubango+u...@googlegroups.com.
>For more options, visit https://groups.google.com/groups/opt_out.
>
>

________________________________

Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.
This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at:
http://www.tid.es/ES/PAGINAS/disclaimer.aspx

[Mamadou]

@aditya
video will not work on emulator. Installation on device is as simple
setting target CPU to "ARM" and pressing "Run".
Please note that this is for developers with at least basic knowledge
and we cannot always respond to questions like: "how to install", "how
to build"...

@Johan
All is native (C/C++) except the UI.

On Feb 28, 12:25 pm, JOHAN LANTZ <jo...@tid.es> wrote:
> Awesome. Out of curiosity, is the audio drivers using native api or a .NET
> api?
>
> /Johan
>

> El 18/02/13 04:58, "Mamadou" <diopmama...@doubango.org> escribió:

> >For more options, visithttps://groups.google.com/groups/opt_out.

[Arslan Pervaiz]

Hi Mamadou,

I want to set default media codec priority.

I find in boghe-core-rt => Models => Configurations

On line number 123

public static int DEFAULT_MEDIA_CODECS =
      (int)(tdav_codec_id_t.tdav_codec_id_gsm |
      tdav_codec_id_t.tdav_codec_id_pcma |
      tdav_codec_id_t.tdav_codec_id_pcmu |
      tdav_codec_id_t.tdav_codec_id_speex_nb |

    tdav_codec_id_t.tdav_codec_id_mp4ves_es |
    tdav_codec_id_t.tdav_codec_id_theora |
    tdav_codec_id_t.tdav_codec_id_h264_bp |
    tdav_codec_id_t.tdav_codec_id_h263p |
    tdav_codec_id_t.tdav_codec_id_h263);

I found this chunk of code. Can You please tell me in code where you are setting default media codec or its priority as in this you are giving many media codecs.

Regards,

 

On Monday, 18 February 2013 08:58:19 UTC+5, Mamadou wrote:

[jinhong su]

congratulation!!

i have got it in my luma920,

i have a problem,when i sent a sip messge by the function "rtMessagingSession::send(Platform::String^ payload)",

i try get the relpy by the function (int SipService::OnMessagingEvent(rtMessagingEvent^ e))

however i cann't get the reply sip message content ,anybody have expperience to get it.

 

Regards!

 

[Muhammad Shahzad]

See home page of doubango, it lists all clients on all platforms,

http://www.doubango.org

Thank you.

On Tue, Mar 19, 2013 at 7:05 PM, David Du <davi...@gmail.com> wrote:

Hi Mamadou,

Sorry I'm new to Doubango. I'm looking to use IMSDroid in Windows PC. Has it been ported? All I found was in Android platform.

Thanks/David

--
You received this message because you are subscribed to the Google Groups "discuss-doubango" group.
To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--

Mit freundlichen Grüßen

Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +49 176 99 83 10 85

MSN: shari...@hotmail.com
Email: shahe...@googlemail.com

[Muhammad Shahzad]

It would me much better if you open a separate thread for your issue, instead of dumping it here.

Thank you.

On Thu, Mar 21, 2013 at 11:55 AM, aleta Thomas <aletath...@gmail.com> wrote:

Hello Sir,

i am new on Doubango. I have downloaded the code of windows phone 8 but when i am compiling the code for Emulator on x86 platform, It is working successfully and emulator is also working but when i am compiling  the code for device on ARM platform. It is giving the me the following errors. 

error LNK1120: 2 unresolved externals G:\bogheWindowsPhone8\boghe\branches\2.0\boghe\Release\BackEndProxyStub\doubango_rt.BackEndProxyStub.dll BackEndProxyStub

error LNK2001: unresolved external symbol doubango_rt2EBackEnd_ProxyFileInfo G:\bogheWindowsPhone8\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

error LNK2001: unresolved external symbol doubango_rt2EBackEnd2EOutOfProcess_ProxyFileInfo G:\bogheWindowsPhone8\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

The command "xcopy /Q /Y "G:\6AnkurWindowsPhone8\boghe\branches\2.0\boghe\Release\BackEndProxyStub\doubango_rt.BackEndProxyStub.dll" "G:\bogheWindowsPhone8\boghe\branches\2.0\boghe\Boghe-wp8"" exited with code 4. Boghe-wp8

How can i resolve these errors. i have the nokia lumia 920 device. How can i install the application in my device.

                                           Thanks in Advance
                                           Aleta Thomas

On Sunday, February 17, 2013 7:58:19 PM UTC-8, Mamadou wrote:

--
You received this message because you are subscribed to the Google Groups "discuss-doubango" group.
To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[Mamadou]

There is something inconsistent in the paths and this is why xcopy fails.
"G:\6AnkurWindowsPhone8" notice the extra "6Ankur"
"G:\bogheWindowsPhone8"
You have most probably inadvertently changed the post build scripts.
If I was you, I'd start with clean checkout without modifications.

--
Mamadou DIOP - Technology Evangelist
Doubango Telecom - Paris, France
http://www.doubango.org
Click here to call me!

[nanusonu]

Hi Mamadou,

Really thankful to you for a wonderful solution. you did a splendid job.for me application is working very fine. but one problem is the length of the SIP message is becoming more than 1400 bytes. So i want to reduce the size of pocket. I have tried to remove the codecs from the application in the following way in configuration.cs class under boghe-core

 public static int DEFAULT_MEDIA_CODECS =

            (int)(tdav_codec_id_t.tdav_codec_id_pcma |
            tdav_codec_id_t.tdav_codec_id_pcmu |
               tdav_codec_id_t.tdav_codec_id_h263);

but the output is still same. So please tell me that how to set codecs in my application.

[Pham Hoang Le]

Hi Mamadou,

I have the same problem. I can run successfully on the emulator, but when i compile for device (i have set everything to ARM), i got these errors :

1. unresolved external symbol doubango_rt2EBackEnd_ProxyFileInfo C:\Users\namanh\Desktop\myboghe\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

2. unresolved external symbol doubango_rt2EBackEnd2EOutOfProcess_ProxyFileInfo C:\Users\namanh\Desktop\myboghe\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

3. The command "xcopy /Q /Y "C:\Users\namanh\Desktop\myboghe\boghe\branches\2.0\boghe\Debug\BackEndProxyStub\doubango_rt.BackEndProxyStub.dll" "C:\Users\namanh\Desktop\myboghe\boghe\branches\2.0\boghe\Boghe-wp8"" exited with code 4. Boghe-wp8

[Mamadou DIOP]

No, this is not the same issue. Your paths seems to be valid which was not the case for the ones from the previous mail.

Do you have any changes in the projects settings?

I'll try with the latest code to see what's the problem.

[Mamadou DIOP]

there is no problem in switching from one to another. Just make sure all binaries use sale target: clean is your friend if there is a link error.

On Mar 22, 2013, at 2:01 PM, nanusonu <nanu...@gmail.com> wrote:

Hi Pham Haong Le,

I have faced this issue in the earlier and fixed.

What you have to do is take another new source code and change the platform to ARM and then build the application. This time you wont get any error.

Note: If you want to work for both emulator and device make two solutions for each. Dont try to change the platform to test in the both device and emulator.( I am doing the same).
:)

[Mamadou DIOP]

https://groups.google.com/groups/profile?enc_user=OIOVaBMAAACW4E0SpPxnxf4Rk2dGtBbeWMj6vob75xS36mXc24h6ww

This is your profile. 

In 4 hours, you asked the same question 7 times.

On Mar 22, 2013, at 2:19 PM, nanusonu <nanu...@gmail.com> wrote:

Hi Mamadou,

I want to call setcodecs from boghe-wp8 application.

I want to access the functions which are in myboghe\doubango\branches\2.0\

doubango\tinyMEDIA from boghe-wp8 application. Is there any way to do that. Please help me on this...

[Mamadou DIOP]

and …8. Ok Let's say 7 and half because this is not really a question.

Is "aryan t <anilatvoxvalley@…>" your brother? I'm asking because you have the same way to ask same questions again and again ;)

On Mar 22, 2013, at 2:34 PM, nanusonu <nanu...@gmail.com> wrote:

I am really for that i am trying to understand the code and how to access them from the application. But i couldn't find any. That is why i have posted many times.

[Ojas Sinha]

Is this also working in Windows RT applications . I am using this in my windows phone 8 applications . But do not have idea for windows RT .

Thankyou for help .

--
You received this message because you are subscribed to a topic in the Google Groups "discuss-doubango" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/doubango/OgvizOVm-4I/unsubscribe?hl=en.
To unsubscribe from this group and all its topics, send an email to doubango+u...@googlegroups.com.

[Mamadou]

@Ojas
No

On 3/22/2013 3:52 PM, Ojas Sinha wrote:

Is this also working in Windows RT applications . I am using this in my windows phone 8 applications . But do not have idea for windows RT .

Thankyou for help .

On Fri, Mar 22, 2013 at 6:41 AM, Mamadou DIOP <diopm...@doubango.org> wrote:

and �8. Ok Let's say 7 and half because this is not really a question.

Is "aryan t <anilatvoxvalley@�>" your brother? I'm asking because you have the same way to ask same questions again and again ;)

On Mar 22, 2013, at 2:34 PM, nanusonu <nanu...@gmail.com> wrote:

I am really for that i am trying to understand the code and how to access them from the application. But i couldn't find any. That is why i have posted many times.


On Friday, March 22, 2013 6:59:44 PM UTC+5:30, Mamadou wrote:

https://groups.google.com/groups/profile?enc_user=OIOVaBMAAACW4E0SpPxnxf4Rk2dGtBbeWMj6vob75xS36mXc24h6ww

This is your profile.�

In 4 hours, you asked the same question 7 times.

On Mar 22, 2013, at 2:19 PM, nanusonu <nanu...@gmail.com> wrote:

Hi Mamadou,

I want to call setcodecs from boghe-wp8 application.

I want to access the functions which are in myboghe\doubango\branches\2.0\

doubango\tinyMEDIA from boghe-wp8 application. Is there any way to do that. Please help me on this...

On Friday, March 22, 2013 6:34:55 PM UTC+5:30, Mamadou wrote:

there is no problem in switching from one to another. Just make sure all binaries use sale target: clean is your friend if there is a link error.

On Mar 22, 2013, at 2:01 PM, nanusonu <nanu...@gmail.com> wrote:

Hi Pham Haong Le,

I have faced this issue in the earlier and fixed.

What you have to do is take another new source code and change the platform to ARM and then build the application. This time you wont get any error.

Note: If you want to work for both emulator and device make two solutions for each. Dont try to change the platform to test in the both device and emulator.( I am doing the same).
:)

On Monday, February 18, 2013 9:28:19 AM UTC+5:30, Mamadou wrote:

Hello,

We're proud to announce supports for Microsoft Windows Phone 8 and Surface Pro starting Doubango revision 820.
We loved coding on these operating systems and are happy to share the code source with you.
The Surface Pro version supports all Doubango features while only core functions are included in Windows Phone 8.
Core functions include:

� - Audio (G.711, Speex and G.722)
� � � * AEC, Noise suppression, AGC, Adaptive jitter buffer...
� � � * Change routing (Earpiece, Speaker or Bluetooth)
� - Video (H.264). Thanks to the OS
� � � * Camera switching (Back/Front)
� - Multitasking using Push Notifications (complete documentation coming soon)
� - Call Hold/Resume

Project Home Page:http://code.google.com/p/boghe/
Building source code:http://code.google.com/p/boghe/wiki/Building_Boghe_v2_wp8

Regards,

--
You received this message because you are subscribed to the Google Groups "discuss-doubango" group.
To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

�
�

--
You received this message because you are subscribed to the Google Groups "discuss-doubango" group.
To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

�
�

--
You received this message because you are subscribed to the Google Groups "discuss-doubango" group.

To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

�
�

--
You received this message because you are subscribed to a topic in the Google Groups "discuss-doubango" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/doubango/OgvizOVm-4I/unsubscribe?hl=en.
To unsubscribe from this group and all its topics, send an email to doubango+u...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

�
�

--
You received this message because you are subscribed to the Google Groups "discuss-doubango" group.
To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

�
�

[Pham Hoang Le]

Thanks nanusonu ! After re-downloading everything, i can now deploy to my Lumia 920.

On Friday, 22 March 2013 06:01:33 UTC-7, nanusonu wrote:

Hi Pham Haong Le,

I have faced this issue in the earlier and fixed.

What you have to do is take another new source code and change the platform to ARM and then build the application. This time you wont get any error.

Note: If you want to work for both emulator and device make two solutions for each. Dont try to change the platform to test in the both device and emulator.( I am doing the same).
:)

On Monday, February 18, 2013 9:28:19 AM UTC+5:30, Mamadou wrote:

Hello,

We're proud to announce supports for Microsoft Windows Phone 8 and Surface Pro starting Doubango revision 820.
We loved coding on these operating systems and are happy to share the code source with you.
The Surface Pro version supports all Doubango features while only core functions are included in Windows Phone 8.
Core functions include:

  - Audio (G.711, Speex and G.722)

      * AEC, Noise suppression, AGC, Adaptive jitter buffer...

      * Change routing (Earpiece, Speaker or Bluetooth)

  - Video (H.264). Thanks to the OS

      * Camera switching (Back/Front)

  - Multitasking using Push Notifications (complete documentation coming soon)

[nanu sonu]

Pham Hoang Le,

welcome always. :)

[Muhammad Shahzad]

Hehehe. This is unfortunately a very commen problem with many people from my region. They somehow use to think that asking same questions again and again to same person would result in more information that person "may be hidding". They don't realize that true professional software developers like mamadou and many many others in opensource community were if wanted to hide or lie about their software then this industry would have died long ago.

So many people including myself are in great debt of these developers, since we earn our living on their software technologies, so they deserve our respect and trust.

Thank you.

[nanu sonu]

Hi Mamadou,

I have seen in boghe-core-rt project. in there some of cxx classes are using directly from the c# classes. But you said we are not using boghe-core-rt in windows phone 8.

So, if you don't mind can you please tell me that is it possible to access the cxx classes from the application. If yes please tell me the way to do. I am feeling shame on myself to ask you these many times. Please excuse me and help me on this.

[Mamadou DIOP]

@nanusonut

As I already  said to your colleague (anilatvoxvalley), the code in boghe-core-rt project is not used for SIP stuffs on WP8. Confirming or not is as simple as putting a breakpoint but I guess like him "you don't have time to waste to understand the code".

All c++ classes with "rt" are COM interfaces and accessible from c# (do not confuse with P/Invoke which is not available on WP8). I also confirm.

[nanu sonu]

hi Farukh,

I think you are new to windows phone application development. This is really a basic question. Anyways i am giving the solution here.

->Just connect the device to you system( check in windows explorer if the device connected  to your system successfully you can find the device name in the explorer).

-> set target to device and run the application. You do not need to worry it will automatically installs the application on your device.

good luck

On Thu, Mar 28, 2013 at 3:07 PM, Farukh sheikh <farukh7...@gmail.com> wrote:

I was also facing of these errors. Now according to you i also have re-download everything. Now the previous errors have been resolved. I have also the Nokia Lumia 920. Please can you tell me the process how can i install the application in my device. i have setting the target ARM. Should i have to connect the device at the time of debugging and application will be install automatically or after the debugging i have to install it explicitly. When i connect the device and debug it, It is giving me only one error that your device is not connected. What should i do? Please help.

                                                                              Thanks in Advance

                                                                               Farukh Sheikh

[Ankur]

On Monday, April 8, 2013 2:23:53 AM UTC-7, Ankur wrote:

Hello nanusonu ,

                          I'm new in windows phone 8 development. I have the Nokia Lumia 920. My device is not registered on Dev Center. Can you tell me is it mandatory that 

i have to register the device through Dev Center to install the application or we can install the application without it. Actually when i connect the device to my system and 

compile the code on setting target  ARM, It gives me a single error that your device is not registered. 

                          How should i resolve it. Thanks in Advance.
                                                                                                             Regards
                                                                                                             Ankur Singh 

[Arslan Pervaiz]

Hi Ankur,

First of all don't post same thing again and again. You posted same thing twice in this thread. Anyway Yes its mandatory to register on Dev Center. As you are going to develop for windows phone and you need developer unlock phone and it can only be done by registering on dev center. Once you are done with registration on Dev center and then you can unlock 5 devices for development on one Dev center account. And you can deploy boghe on your Lumia 920 and can develop for windows phone.

Regards,
Arslan Pervaiz

[Ankur]

Hello Arslan Pervaiz,

          Thanks 2 your reply...  Actually i was not sure that i have posted successfully its or not thats why i have posted the same thing twice. Next time this will be remembered in my mind. Once again thanking you in anticipation.
                                                                              Regards,
                                                                              Ankur Singh

[Mamadou DIOP]

In the announcement, there is the list of supported codecs and iLBC is not in this list. Using setCodecs(iLBC) is useless as this function is "EnableIfSupported".

Supported audio codecs: G.711, Speex, G722 and GSM.

Supported video codecs: H.264

On Apr 24, 2013, at 7:34 AM, Ambuj Pandey <pandey...@gmail.com> wrote:

Hi Mamadou,

First of all thanks for your wonderful effort. 

I have a small query about iLBC codec support on Boghe. I have to use iLBC codec for my application on WP8. I tried your previous suggestion (rtSipStack::setCodecs) and it is working for some other codec but not for iLBC. 

Please help me to use iLBC codec.

Regards

Ambuj Pandey 

On Monday, 18 February 2013 09:28:19 UTC+5:30, Mamadou wrote:

Hello,

We're proud to announce supports for Microsoft Windows Phone 8 and Surface Pro starting Doubango revision 820.
We loved coding on these operating systems and are happy to share the code source with you.
The Surface Pro version supports all Doubango features while only core functions are included in Windows Phone 8.
Core functions include:
  - Audio (G.711, Speex and G.722)
      * AEC, Noise suppression, AGC, Adaptive jitter buffer...
      * Change routing (Earpiece, Speaker or Bluetooth)
  - Video (H.264). Thanks to the OS
      * Camera switching (Back/Front)
  - Multitasking using Push Notifications (complete documentation coming soon)
  - Call Hold/Resume

Project Home Page:http://code.google.com/p/boghe/
Building source code:http://code.google.com/p/boghe/wiki/Building_Boghe_v2_wp8

Regards,

[Ankur]

Hello Arslan Pervaiz Sir,

 I need your help. when i am taking the fresh code and compiling it of setting target Emulator, it is working fine on emulator but when i'm changing the target for device it is giving me the following errors. 

1. unresolved externals D:\myboghe\boghe\branches\2.0\boghe\Debug\BackEndProxyStub\doubango_rt.BackEndProxyStub.dll BackEndProxyStub

2. unresolved external symbol doubango_rt2EBackEnd_ProxyFileInfo D:\myboghe\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

3. unresolved external symbol doubango_rt2EBackEnd2EOutOfProcess_ProxyFileInfo D:\myboghe\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

4. The command "xcopy /Q /Y "D:\myboghe\boghe\branches\2.0\boghe\Debug\BackEndProxyStub\doubango_rt.BackEndProxyStub.dll" "D:\myboghe\boghe\branches\2.0\boghe\Boghe-wp8"" exited with code 4. Boghe-wp8

Vice Versa when i am taking the fresh code and compiling it of setting target device, it is working fine on device but when i'm changing the target emulator it is again giving me the same errors. Is it not possible that i can use the single code for both device as well as Emulator.

                                                                                      Thanks and Regards,

                                                                                       Ankur Singh

                                                               

On Monday, April 8, 2013 3:04:47 AM UTC-7, Arslan Pervaiz wrote:

[Arslan Pervaiz]

Hi Ankur,

As per my knowledge and as per my understanding, in your Boghe-WP8 in compiler directive your are not adding WINRT or once you change target framework, it might be skipped. So try to add this compiler directive "WINRT". I hope it will be done. And my one question are you using the same Boghe-WP8 project or you are reffering this project in your own project.?

[Mamadou DIOP]

easiest workaround: "rebuild" solution or "clean" then "build".

On May 1, 2013, at 2:35 AM, Robert Altland <mymin...@gmail.com> wrote:

I had this same problem building when switching between x86 and ARM and Ankur's solution worked for me. To be clear for anyone else that runs into this specific problem: the directory you want to delete before building for a different architecture is: ~\boghe\branches\2.0\boghe\Debug. I was deleting all the typical debug directories inside every project and that didn't fix this error. 

On Monday, April 29, 2013 3:41:38 AM UTC-7, Ankur wrote:

Hello Arslan Pervaiz Sir,
                                     First of all thanks a lot for your help because you have given me the idea to resolve it. WINRT is added in my Boghe-WP8 in compiler directive. It is not the problem. When i was changing the target framework from one to another and was cleaning my solution, In the debug folder the two folder name called  BackEnd and BackEndProxyStub was not deleting. I am deleting the both folder from my side every time  and again compiled it. Now it is working fine on both device as well as Emulator also. Yes i am using the same Boghe-WP8 project. but i am doing some changes in this project related to codec in my way.

[Ankur]

"Clean" and "rebuild" the solution  was not solving the errors thats why i have tried it in this way and now it is working fine.

On Tuesday, April 30, 2013 5:35:38 PM UTC-7, Robert Altland wrote:

I had this same problem building when switching between x86 and ARM and Ankur's solution worked for me. To be clear for anyone else that runs into this specific problem: the directory you want to delete before building for a different architecture is: ~\boghe\branches\2.0\boghe\Debug. I was deleting all the typical debug directories inside every project and that didn't fix this error. 

On Monday, April 29, 2013 3:41:38 AM UTC-7, Ankur wrote:

Hello Arslan Pervaiz Sir,
                                     First of all thanks a lot for your help because you have given me the idea to resolve it. WINRT is added in my Boghe-WP8 in compiler directive. It is not the problem. When i was changing the target framework from one to another and was cleaning my solution, In the debug folder the two folder name called  BackEnd and BackEndProxyStub was not deleting. I am deleting the both folder from my side every time  and again compiled it. Now it is working fine on both device as well as Emulator also. Yes i am using the same Boghe-WP8 project. but i am doing some changes in this project related to codec in my way.

On Sunday, April 28, 2013 11:59:58 PM UTC-7, Arslan Pervaiz wrote:

[Mamadou DIOP]

strange because I'm switching between x86 and arm several times a day and doing a rebuild works for me. I've never been required to delete any folder.

[Robert Altland]

Clean and rebuild didn't work for me either. That deletes stuff in the bin directories, and the problem directory is outside of any bin directory. Perhaps I didn't set up the physical directory structure correctly? I can see how that would cause any post build events that are supposed to copy files to other projects' bin directories to incorrectly copy files to a directory outside of any project. I didn't dig into it to try to verify this, just a thought. 

At any rate, I'm not the only one, so even if I've done something incorrectly, it could be a common mistake and may be worth looking into further.

[Arslan Pervaiz]

Robert And Ankur,

I doubt that you didnot configured the project successfully otherwise no such issue. As I am doing work on Boghe-WP8 from Feb when its released. And I have never faced so far. Please read Doubano-boghe documentation and follow the same way of directory setup. Then there will be no issue as I strongly believe.

[vijendra kumar]

Hi Arsan 

I am working over a Windows 8 phone app in which SIP calling has been required.While browsing over internet for the solutions for the SIP calling I have found Doubango SIP video client for Windows Phone 8 and Surface Pro and i have downloaded the sources file to execute and i have already DSK for Windows 8 SDK with Visual Studio 2012 Professional Edition and all project associated with Solution are opening perfectly and when i tried to Build below mentioned projects it's throwing error:

- BackEnd

- BackEndProxyStub

- boghe-xdm-rt

I have a 64-bit Operating System, and x64 based processor with and i had tried to change the Configuration as per my CPU type but still it's throwing error while building the solution, please suggest a correct Configuration type as per my Platform i have attached a screenshot for the same.

Look forward to hear from you.

Thanks & Regards

Vijendra

[Ankur]

@Vijendra Kumar
   You have not loaded the project successfully, Thats why it is giving you the error. Download the fresh project again with latest revision and then re-compile it.

[vijendra kumar]

@Ankur I tried so many times after taking fresh project but still facing the same issue, please let me know any turnaround solution for the same.

Error 1 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_ActionConfig.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 2 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_DDebug.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 3 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_Enums.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 4 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_MediaContent.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 5 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_Msrp.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 6 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_MediaSessionMgr.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 7 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_SipCallback.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 8 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_SipEvent.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 9 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_SipMessage.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 10 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_SipUri.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 11 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_SipStack.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 12 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_SipSession.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 13 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_String.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 14 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_Xcap.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 15 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\winrt\doubango_rt\src\rt_SMSEncoder.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 16 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\ActionConfig.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 17 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\DDebug.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 18 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\AudioResampler.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 19 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\MediaSessionMgr.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 20 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\MediaContent.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 21 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\Msrp.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 22 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\ProxyConsumer.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 23 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\ProxyProducer.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 24 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\ProxyPluginMgr.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 25 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\SafeObject.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 26 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\SipCallback.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 27 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\SipStack.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 28 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\SipSession.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 29 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\SipEvent.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 30 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\SipMessage.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 31 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\SMSEncoder.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 32 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\Xcap.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 33 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\bindings\_common\SipUri.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 34 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\tinyDAV\src\video\winm\tdav_consumer_winm.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 35 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\tinyDAV\src\audio\wasapi\tdav_producer_wasapi.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 36 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\tinyDAV\src\audio\wasapi\tdav_consumer_wasapi.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 37 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\tinyDAV\src\video\winm\tdav_producer_winm.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 38 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\tinyNET\src\tnet_utils.c': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 39 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\tinySAK\src\tsk_string.c': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 40 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\tinySAK\src\tsk_thread.c': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 41 error C1083: Cannot open source file: '..\..\..\..\..\..\doubango\branches\2.0\doubango\tinySAK\winrt\ThreadEmulation.cxx': No such file or directory D:\SVN-Repo\boghe\branches\2.0\boghe\winrt\BackEnd\c1xx BackEnd

Error 42 error C1083: Cannot open include file: 'rt_SipCallback.h': No such file or directory (SipService.cxx) d:\svn-repo\boghe\branches\2.0\boghe\winrt\backend\SipService.h 30 1 BackEnd

Error 43 error C1083: Cannot open include file: 'rt_SipCallback.h': No such file or directory (Server.cxx) d:\svn-repo\boghe\branches\2.0\boghe\winrt\backend\SipService.h 30 1 BackEnd

Error 44 error C1083: Cannot open include file: 'rt_SipCallback.h': No such file or directory (Globals.cxx) d:\svn-repo\boghe\branches\2.0\boghe\winrt\backend\SipService.h 30 1 BackEnd

[vijendra kumar]

@Ankur 

Sorry i was doing something stupid that's why it was not working now it's working fine and i can be able to build the project and trying to make SIP calls from servers

Regards

Vijendra

[Attila-JS]

Hi Mamadou,
 
I went through "building on WP8" website but confused whether building Boghe client for WP8 needs WP8 SDK installed Or it just needs latest visual studio 2012 (I presume it needs 64 bit window8 but not sure it works on 64 bit windows 7 also). I tried installing WP8 SDK on windows server 2008 but did not help. Basically i dont have Windows 8 64 bit machine but have windows 7
can you pls help ?

regds
JS

[Ankur Singh]

@Attila-J S        
No it will work only on Windows Phone 8. You have required the Windows 8 on 64 Bit System, Visual Studio 2012 only because Visual Studio works only on Windows 8 and download the Microsoft SDK 8.0. Read the Doubango guide or documentation for other details.

--
You received this message because you are subscribed to a topic in the Google Groups "discuss-doubango" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/doubango/OgvizOVm-4I/unsubscribe.
To unsubscribe from this group and all its topics, send an email to doubango+u...@googlegroups.com.

[Attila-JS]

Hi All,

I did build boghe-wp8 app on win 8 phone SDK but deployment to lumia 620 phone is not happening. I tried deploy from VS 2012 but it complains with error that there is mismatch in winmd file etc. Then i manually tried putting the XAP file into SD card but is not recognized. I tried XAP deployment tool also but the tool crashes on my system always. NOTE: My phone is registered and unlocked for windows app development. Any idea what is the issue here ?

regds,

[Attila-JS]

Hi,

now I am building on windows 8 SDK. I see lot of warning like these when I build. Are they part of expected warnings ?

 

Warning 3 warning LNK4099: PDB 'vc110.pdb' was not found with 'libspeex.lib(exc_10_16_table.obj)' or at 'C:\myboghe\boghe\branches\2.0\boghe\Release\BackEnd\vc110.pdb'; linking object as if no debug info C:\myboghe\boghe\branches\2.0\boghe\winrt\BackEnd\libspeex.lib(exc_10_16_table.obj) BackEnd

regds

[wyxian...@gmail.com]

Hi,sir
I was able to compile and used the app on my phone,however there is the noise in use process.Is it right?the decoding problem.I try to change the codes,but problems still exist.
My test phone is Nokia 620.

[Mamadou]

Looks like there is a regression. Browser the archive and you'll find a thread about it with a reference to the latest revision know to work without this issue.

--
Mamadou DIOP - Technology Evangelist
Doubango Telecom - Paris, France
http://www.doubango.org
Click here to call me!

[Uzma Mir]

Hi vijendra kumar,

i am new to Windows Phone development.Can you tell me what mistake were you making..because i am getting the same errors as you were.

I would be very thankful for your help.

thanks.

[Pathibha Pandey]

Hello Mamadou,
             I have downloaded the boghe wp8 and deployed in my phone and it is working fine on my Nokia Lumia 920. Really you have done a great job but there is a confusion in my mind that in the Winrt->BackEnd folder there are .CXX extension files. Why you have used the .CXX extension in place of .cpp. Actually i am watching first time .CXX extension. I searched on internet but didn't find the actual results. Waiting for your reply.

[Nishant Chandwani]

Hello @Vijendra kumar ...

i am facing same problem  . Please Give me solution . how you solved this error i want to build this project 

[hitaishi...@gmail.com]

Hello sir

 

I have a same error like ur error in this Project 

is there any solution  for solve this error
  

[Nishant Chandwani]

I have the same problem. I can run successfully on the emulator, but when i compile for device (i have set everything to ARM), i got these errors :

1. unresolved external symbol doubango_rt2EBackEnd_ProxyFileInfo C:\Users\namanh\Desktop\myboghe\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

2. unresolved external symbol doubango_rt2EBackEnd2EOutOfProcess_ProxyFileInfo C:\Users\namanh\Desktop\myboghe\boghe\branches\2.0\boghe\winrt\BackEndProxyStub\dlldata.obj BackEndProxyStub

3. The command "xcopy /Q /Y "C:\Users\namanh\Desktop\myboghe\boghe\branches\2.0\boghe\Debug\BackEndProxyStub\doubango_rt.BackEndProxyStub.dll" "C:\Users\namanh\Desktop\myboghe\boghe\branches\2.0\boghe\Boghe-wp8"" exited with code 4. Boghe-wp8

[Ankur]

Hello Nishant Chandwani,
                                      Set the target device (ARM). Just go to the location C:\MyBoghe\boghe\branches\2.0\boghe\Release.
 And delete the both folder name called BackEnd and BackEndProxyStub at this location. Now clean it and recompile it and run on your device. your problem will be solved.               
                                        Regards,
                                        Ankur Singh

[Nishant Chandwani]

Hello Ankur sir 

First i try Delete Release folder and then run in deveice that return a Error  
Second time  i have Download a project in D drive  and i will remove Release and Debug Both folder and Go to solution and click to property and change   Plateform  select ARM and run a project now i have only one Error Please Help me 

The Error is 

Error 1 Could not find file 'D:\myboghe\boghe\branches\2.0\boghe\Boghe-wp8\obj\ARM\Debug\XapCacheFile.xml'. Please rebuild the solution and try again. 0 0

Befor this error  one popup and message is 
" The application could not be launched for debugging . Ensure that the target Device screen is unclocked and that the application is installed . 

This is My Output

1>------ Deploy started: Project: Boghe-wp8, Configuration: Debug ARM ------

1>Deployment of application to device failed.

1>Error: Cancelled

========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========   

--

You received this message because you are subscribed to a topic in the Google Groups "discuss-doubango" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/doubango/OgvizOVm-4I/unsubscribe.
To unsubscribe from this group and all its topics, send an email to doubango+u...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

[Ankur]

Hello Nishant,
                     This is a very basic question. First of all make sure that your device is registered on Windows Dev center or not. If it is registered then unlock your device before deploy the application in your device. Which windows phone 8 device you are using for testing?

[Nishant Chandwani]

Thankyou for Help .. My problem is solve 

[Jose Antonio Rivas Fernandez]

Hello, I am trying to create a sip client for a cordova W8 app where you can use Win RT components,
and I am trying to use your app to create the SIP RT component, but I don't have idea how to compile to Surface Pro (win rt)
could you help me please? thanks :)

[Arun Mench]

Hi Jose,

My name is Arun and I am want to trye SIP calls. You mentioned that you are able to make calls using http://www.iptel.org can you please let me know whats the process to use it and make it work the SIP call on my WP8 phone please.

Thanks,
Arun

On Saturday, February 23, 2013 7:42:52 PM UTC+5:30, Jose Maria Gabaldon wrote:

Hi,

I'm using a Nokia Lumia 920.

Regards,

Enviado desde mi Windows Phone

---

De: Ankur
Enviado el: 23/02/2013 01:39 a. m.
Para: doub...@googlegroups.com
Asunto: [Doubango] Re: Supports for Windows Phone 8 and Surface Pro

Hello Sir,

             Please let me know which windows phone device you have used to install application successfully. 
             Thanks in advance
                                                                                    Thanks and Regards
                                                                                     Ankur Singh

On Tuesday, February 19, 2013 2:42:15 PM UTC-8, Jose Maria Gabaldon wrote:

Hi,

I was able to compile and install in my phone, this is a great first approach:

- I was able to log in with my iptel.org sip account
- I was able to make sip calls in the iptel.org network
- I was able to receive sip calls from the iptel.org network while the app is in foreground

The only issue I found is that seems that Windows Push Notifications are not working thus sip calls are not received when the app is not in foreground.

I hope you can help me find the way to use the app in the backgroud,

I hope I can help you troubleshoot the app,

Thanks for your great job!

Regards,

On Tuesday, February 19, 2013 8:18:59 AM UTC-6, Mamadou wrote:

To run the simulator you'll need a machine with supports for HyperT

On Feb 19, 1:32 am, Muhammad Shahzad <shaherya...@gmail.com> wrote:
> Congrats and many thanks. It was much needed port.
>
> I have successfully compiled it in a virtual machine however i am unable to
> launch the emulator, perhaps because of CPU features missing in VM. I will
> try it on a spare (real) machine tomorrow.
>
> Thank you.

>
>
>
>
>
>
>
>
>
> On Mon, Feb 18, 2013 at 4:58 AM, Mamadou <diopmama...@doubango.org> wrote:
> > Hello,
>
> > We're proud to announce supports for Microsoft Windows Phone 8 and Surface
> > Pro starting Doubango revision 820.
> > We loved coding on these operating systems and are happy to share the code
> > source with you.
> > The Surface Pro version supports all Doubango features while only core
> > functions are included in Windows Phone 8.
> > Core functions include:
> >  - Audio (G.711, Speex and G.722)
> >      * AEC, Noise suppression, AGC, Adaptive jitter buffer...
> >      * Change routing (Earpiece, Speaker or Bluetooth)
> >  - Video (H.264). Thanks to the OS
> >      * Camera switching (Back/Front)
> >  - Multitasking using Push Notifications (complete documentation coming
> > soon)
> >  - Call Hold/Resume
>

> > Project Home Page:http://code.google.com/p/**boghe/<http://code.google.com/p/boghe/>
> > Building source code:http://code.google.com/p/**
> > boghe/wiki/Building_Boghe_v2_**wp8<http://code.google.com/p/boghe/wiki/Building_Boghe_v2_wp8>
>
> > Regards,
>
> > --
> > You received this message because you are subscribed to the Google Groups
> > "discuss-doubango" group.

> > To unsubscribe from this group and stop receiving emails from it, send an

> > email to doubango+unsubscribe@**googlegroups.com<doubango%2Bunsubscribe@googlegroups .com>
> > .
> > For more options, visithttps://groups.google.com/**groups/opt_out<https://groups.google.com/groups/opt_out>
> > .
>
> --
> Muhammad Shahzad
> -----------------------------------
> CISCO Rich Media Communication Specialist (CRMCS)
> CISCO Certified Network Associate (CCNA)
> Cell: +49 176 99 83 10 85
> MSN: shari_78...@hotmail.com
> Email: shaherya...@googlemail.com

--

You received this message because you are subscribed to the Google Groups "discuss-doubango" group.

To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[Arun Mench]

Hi Jose,

My name is Arun and need help form you.

I am able to compile and install in my phone.
Want to know how can I use iptel.org for SIP call test.Can you please help me if there is with any details procedure if you have.

Thanks,
Arun

On Wednesday, February 20, 2013 4:12:15 AM UTC+5:30, Jose Maria Gabaldon wrote:

Hi,

[sarvendra anand]

How to integrate PJSIP with VOIP chatterbox sample app Windows Phone 8

I am trying to integrate PJSIP with Voip chatterbox sample app Windows Phone 8. I can make a call but i cannot hear receivers voice nor he can hear mine. I am still not able to figure out how to safely remove audio loopback from sample app. Before doing this I made a simple app with UI and WinRT and made call using pjsip, i was able to send and receive audio. 

PS- I used my app to call and receiver used linphone windows phone app. 

Can any one tell me how to remove loopback and send and receive audio? 

[Mamadou DIOP]

The right place to ask questions about pjsip: http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org

--
You received this message because you are subscribed to the Google Groups "discuss-doubango" group.

To unsubscribe from this group and stop receiving emails from it, send an email to doubango+u...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

[RAMESH KUMAR]

Hi Sir, 

We are using the Solution for Windows Phone 8, 
we are Not able to connect 

INFO [BogheApp.NativeEventsListner]: ***ERROR: function: "tnet_transport_mainthread()"

file: "............\Comm\branches\2.0\doubango\tinyNET\src\tnet_transport_win32.c" 
line: "680" 
MSG: READ FAILED.

INFO [BogheApp.NativeEventsListner]: ***ERROR: function: "tnet_transport_mainthread()"

file: "............\Comm\branches\2.0\doubango\tinyNET\src\tnet_transport_win32.c" 
line: "680" 
MSG: (SYSTEM)NETWORK ERROR ==>The operation completed successfully. 

1)ch...@sip2sip.info username:chatr password:abcd123 Domain/Realm:sip2sip.info 
But i am able to login using jsti aplliction using same Cerditnals. 
Can Any one Help me out what could be the problem.. 

Please note i have just built the doubangowinrt-35719\UI\branc 

Can You Please let me know how can we use the appliction for iptel.org can You Please share the SIP Ips Which you are using

Thanks and Regards 
Ramesh kumar