Webrtc and register sip

[Tomasz Sidło]

Hello, 

I have two questions 

1) Does the dsiprouter also work via websocket (webrtc)? I tried to connect to SSS to port 4443 but I can't see the initial request to kamailio. 

2) can I register to another sip server without any problems? example dsiprouter sends registrations to freepbx to account 100 and registers there and I can easily dial in to this account.

[Mack Hendricks]

My answers are below

Sent from my iPhone

On Feb 7, 2021, at 7:08 AM, Tomasz Sidło <t...@softvi.pl> wrote:

Hello, 

I have two questions 

1) Does the dsiprouter also work via websocket (webrtc)? I tried to connect to SSS to port 4443 but I can't see the initial request to kamailio. 

You should be able to, but I haven’t tried in a while

2) can I register to another sip server without any problems? example dsiprouter sends registrations to freepbx to account 100 and registers there and I can easily dial in to this account.

Yes, you can use Domain routing to route SIP request to a backend media server such as FreePBX

--
You received this message because you are subscribed to the Google Groups "dSIPRouter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dSIPRouter+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dSIPRouter/9c82d791-1fe5-4b15-b4d6-10965cc28186n%40googlegroups.com.

[Tomasz Sidło]

Can anyone unequivocally answer my questions? 

From my point of view it does not work, but the question is has anyone tried and succeeded, possibly the creator?

[Accounting]

It should work.  What version of dSIP?  Which WebRTC library are you using?  What errors  do you see in the Kamailio log or on the browser?

[Tomasz Sidło]

dSIP: Version 0.64 

library doubango

use ssl lets wildcard

kamailio does not show any information. The only thing I have found if tls.cfg turns off server certificate verification, then you can connect via webrtc to another PBX.

[Mack Hendricks]

Yes, that’s the correct address.  I will it a try to today and record a video about it.

On Feb 7, 2021, at 7:18 AM, Tomasz Sidło <t...@softvi.pl> wrote:

I don't know what the correct wss address should be wss: //domain.com: 4443? onhttps://www.doubango.org/sipml5/expert.htm

niedziela, 7 lutego 2021 o 13:12:52 UTC+1 Mack Hendricks napisał(a):

To view this discussion on the web visit https://groups.google.com/d/msgid/dSIPRouter/03801812-5c04-44f6-9fb2-2ff35f23b3e1n%40googlegroups.com.

[Mack Hendricks]

Here’s a video on how to configure this: https://youtu.be/nOHwrmuLLL0

Sent from my iPhone

On Feb 9, 2021, at 8:12 AM, Mack Hendricks <ma...@dopensource.com> wrote:

Yes, that’s the correct address.  I will it a try to today and record a video about it.

[Accounting]

I do install -all

I will check out the other post.  But, I haven’t tried FreePBX with pjsip in a while 

On Sat, Feb 13, 2021 at 8:26 AM Tomasz Sidło <t...@softvi.pl> wrote:

Thanks for the video, I haven't tried fusionpbx, but I will check.

for sure on freepbx after pjsip works, but there are problems, I described it in the second post.

which option do you choose when you install dsiprourer? 

[Tomasz Sidło]

Thanks for the video, I haven't tried fusionpbx, but I will check.

for sure on freepbx after pjsip works, but there are problems, I described it in the second post.

which option do you choose when you install dsiprourer? 

sob., 13 lut 2021 o 08:02 Mack Hendricks <a...@goflyball.com> napisał(a):

[Phú Nguyễn Thành]

Dear Tomasz Sidto,

I use FreePBX + Dsipreouter, when my webrtc connect to dsiprouter via wss://IP_ADD_Dsip:4443/ failed.

Thanks you.

Vào lúc 15:15:38 UTC+7 ngày Thứ Sáu, 19 tháng 2, 2021, Tomasz Sidło đã viết:

[Tomasz Sidło]

Hi,

have you read my whole thread?

Set SSL 

Wysłane z iPhone'a

Wiadomość napisana przez Phú Nguyễn Thành <ph...@basebs.com> w dniu 28.04.2022, o godz. 04:18:

Dear Tomasz Sidto,

You received this message because you are subscribed to a topic in the Google Groups "dSIPRouter" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/dSIPRouter/rTgus43fIbw/unsubscribe.
To unsubscribe from this group and all its topics, send an email to dSIPRouter+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dSIPRouter/045cb5fb-6c97-4f28-92c8-2baf1b2798d1n%40googlegroups.com.

[Hootan Ghiasi]

Hi,

i have same problem, i installed dsiprouter, set ssl on it via gui,

how can i set my ssl on port 4443?