Clusterctrl Alert led ON and ERROR no devices Found

[LAB's VMLAB]

hi,

Recently ordered 2 ClusterHat's v2.5  and I have an issue with 1 ClusterHat

When starting up with this ClustreHat it is not recognized and does not work. the blue alert led is on .

When performing a reboot it Fails to start cluster-init as alos rc.local fails to start

Went through all treads for issue solutions but no can do

when connecting my other clusterHat all work fine on the same raspberry to exclude the raspberry pi.

any ideas of fixing this or is this device defect? 

 

her output from all commands and log files from the clusterHat:

FAULTY HAT

--------------------

  `.::///+:/-.        --///+//-:``    pi@piCLUSTER 

 `+oooooooooooo:   `+oooooooooooo:    ------------ 

  /oooo++//ooooo:  ooooo+//+ooooo.    OS: Raspbian GNU/Linux 10 (buster) armv7l 

  `+ooooooo:-:oo-  +o+::/ooooooo:     Host: Raspberry Pi 3 Model B Plus Rev 1.3 

   `:oooooooo+``    `.oooooooo+-      Kernel: 5.10.17-v7+ 

     `:++ooo/.        :+ooo+/.`       Uptime: 32 mins 

        ...`  `.----.` ``..           CPU: BCM2835 (4) @ 1.400GHz 

     .::::-``:::::::::.`-:::-`        Memory: 79MiB / 924MiB 

    -:::-`   .:::::::-`  `-:::-       Disk (/): 7.3G / 29G (27%) 

pi@piCLUSTER:~ $ lsusb -t

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M

    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M

        |__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/3p, 480M

            |__ Port 1: Dev 5, If 0, Class=Vendor Specific Class, Driver=lan78xx, 480M

            |__ Port 2: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M

                |__ Port 2: Dev 6, If 0, Class=Hub, Driver=hub/4p, 480M

                    |__ Port 1: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M

                    |__ Port 1: Dev 7, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M

                    |__ Port 4: Dev 8, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M

pi@piCLUSTER:~ $ clusterhat status

ERROR: No ClusterHAT/CTRL devices found

pi@piCLUSTER:~ $ systemctl status clusterctrl-init.service

● clusterctrl-init.service - ClusterCTRL init

   Loaded: loaded (/lib/systemd/system/clusterctrl-init.service; enabled; vendor preset: enabled)

   Active: failed (Result: exit-code) since Tue 2021-04-20 15:17:06 CEST; 13min ago

  Process: 331 ExecStart=/sbin/clusterctrl init (code=exited, status=1/FAILURE)

 Main PID: 331 (code=exited, status=1/FAILURE)

Apr 20 15:17:05 piCLUSTER systemd[1]: Starting ClusterCTRL init...

Apr 20 15:17:06 piCLUSTER clusterctrl[331]: ERROR: No ClusterHAT/CTRL devices found

Apr 20 15:17:06 piCLUSTER systemd[1]: clusterctrl-init.service: Main process exited, code=exited, status=1/FAILURE

Apr 20 15:17:06 piCLUSTER systemd[1]: clusterctrl-init.service: Failed with result 'exit-code'.

Apr 20 15:17:06 piCLUSTER systemd[1]: Failed to start ClusterCTRL init.

[Chris Burton]

Hi, 

When starting up with this ClustreHat it is not recognized and does not work. the blue alert led is on .

When performing a reboot it Fails to start cluster-init as alos rc.local fails to start

I'd advise checking it's pushed onto the GPIO pins all the way, it should be flush with the 12mm spacers on the Pi.

Chris. 

[LAB's VMLAB]

Hi Chris,

sorry for the late response

Yes I checked that, like I said if I connect my other clusterhat board and this works fine.

also did the test on one of my other Pi's with the same result.

this board always give blue"alert" led and previous message and my other one works fine.

 

Is there a way to initialize the board to some factory reset mode?

thanks4ur time,

VMLAB

--
You received this message because you are subscribed to a topic in the Google Groups "ClusterHAT" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/clusterhat/orrrrDsydMU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to clusterhat+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/clusterhat/c68e6f0e-9fa0-43dd-8789-9e470659fdc9n%40googlegroups.com.

[Chris Burton]

Hi, 

sorry for the late response

Yes I checked that, like I said if I connect my other clusterhat board and this works fine.

also did the test on one of my other Pi's with the same result.

this board always give blue"alert" led and previous message and my other one works fine.

 

Is there a way to initialize the board to some factory reset mode?

Can you send the serial number on the board and if possible a picture of the GPIO pin area of the board (top/bottom) to sup...@8086.net.uk please.

Chris.

[Marco Picard]

i get i have the same issue with a clusterhat v2.5, alert blue led does not shut down at operating system start and when controller finish booting, 
ERROR: No ClusterHAT/CTRL devices found at terminal command "clusterhat on"

[Chris Burton]

As the intro blurb says "Please no thread hijacking, even if you have a similar problem please start a new thread to make it easier to follow.".

Thanks,

 Chris.