Fpetool

[Salah Benkorichi]

Hi,

I would appreciate if I can get a feedback on this. A colleague of mine trying to use the Fpetool, that helps to determine the activation of sprinklers timing. However, for some reason it's not able to be installed on Windows 10. Might be due to the architecture of the software format.

Is there any way around to get it working? Thanks !

The software can be found on on NIST web below:

https://www.nist.gov/file/67031

[Richard Peacock]

FPETool is very old at this point in time. It’s a 32 bit MS-DOS program that just doesn’t run on the latest windows computers. The US NRC has most of the calculations in FPETool in spreadsheet form, including sprinkler activation (see Chapter 10). It’s available at

https://www.nrc.gov/reading-rm/doc-collections/nuregs/staff/sr1805/

Rick Peacock

[Salah Benkorichi]

Many thanks Rick.

Regards,

Salah

--
You received this message because you are subscribed to a topic in the Google Groups "CFAST" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/cfast/smrcqsdy0lM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to cfast+unsubscribe@googlegroups.com.
To post to this group, send email to cf...@googlegroups.com.
Visit this group at https://groups.google.com/group/cfast.
For more options, visit https://groups.google.com/d/optout.