Ethernet problem on beagleboard-xm

[hari]

I have loaded ubuntu 12.10 in sd card and booted it in beagleboard-xm rev c. After startup I entered ifconfig -a, I have found only lo and usb0 connections. I havent found eth0 there. I have connected lan cable from modem to ethernet port.But when i entered  "sudo dhclient eth0", it shows device cannot found. I need internet on my board for updating my packages.Is there anything to do to start internet connection via lan cable? Please help me to solve this issue.

Regards,

Hari

[Robert Nelson]

Wouldn't it just be easier to flash a new image onto the sd card?

http://elinux.org/BeagleBoardUbuntu

as "12.10" aka "Quantal" is so old, it isn't even in the repo anymore.

http://ports.ubuntu.com/dists/

So you really don't have any "packages" to update..

Regards,

--
Robert Nelson
http://www.rcn-ee.com/

[Robert Nelson]

brain fart, it's there, but it's going end of life this month.

[Harisanker M]

Thank u sir,

Which version of ubuntu i need to load on sd card for getting ethernet connection without any issue? My intention is to connect camera and do face and eye detection on beagleboard-xm.

Please assist me.

Regards,

Hari

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/xlvuzSpyepg/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Robert Nelson]

On Fri, Apr 18, 2014 at 1:57 PM, Harisanker M <hsma...@gmail.com> wrote:
> Thank u sir,
> Which version of ubuntu i need to load on sd card for getting ethernet
> connection without any issue? My intention is to connect camera and do face
> and eye detection on beagleboard-xm.
> Please assist me.

http://elinux.org/BeagleBoardUbuntu#BeagleBoard_xM

[Harisanker M]

wget https://rcn-ee.net/deb/microsd/saucy/bbxm-ubuntu-13.10-2014-02-16-2gb.img.xz

Is ubuntu 13.10 satisfies my needs?

[Robert Nelson]

On Fri, Apr 18, 2014 at 2:05 PM, Harisanker M <hsma...@gmail.com> wrote:
> wget
> https://rcn-ee.net/deb/microsd/saucy/bbxm-ubuntu-13.10-2014-02-16-2gb.img.xz
>
> Is ubuntu 13.10 satisfies my needs?

working ethernet [x]

The rest is "your" application..

[Harisanker M]

Thank you sir....let me try it

Regards,

Hari

[Harisanker M]

Sir. I have installed ubuntu 13.10 and its working now. I got internet on my beagleboard-xm. I have to run face detection using camera and opencv library. For that what all things I have to install/update on the board???? Please help me in this as I am a beginner in Beagleboard-xm.

Awaiting ur valuable reply regarding this

Thanking u for ur help and support.

Thanks & Regards,

Hari

On 19 April 2014 00:37, Robert Nelson <robert...@gmail.com> wrote:

[ozka...@gmail.com]

Have a look at this page: http://elinux.org/ECE597_Opencv_on_the_BeagleBoard

Hope this helps!

Regards,
Ozkan.

[Harisanker M]

Thanku for your reply.....

Now i have installed opencv,libwebcam,etc and compiled a sample c program-hello.c    It works!!!!

When I compiled an opencv program it shows "Gtk-warning: cannot open display".

Can anyone please find a solution for this.

Thank & Regards,

Hari