Recovering eMMc Data over JTAG?

[AndyS]

Hi there,

I recently connected my beaglebone with reverse polarity 5v on the power jack.

The BBB is now unresponsive - no flashing user leds at startup - no ability to SSH over usb.

I have some work stored on the device - Is it possible to save this data from emmc if I buy a jtag debugger?

Thanks in advance.

Andy

[Gerald Coley]

If the board is blown and will not boot, the JTAG will not do you any good.

If you send it in for repair, assuming we can repair the board which we usually can, there is a good chance the eMMC is good and we can send it back to working. Just note that you want to keep the eMMC in the RMA request.

Gerald

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Gerald

 

ger...@beagleboard.org

http://beagleboard.org/

[andrew stillie]

Hi Gerald,

I requested the RMA,  should I get an email confirmation?

You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/lLvGEUP7BnQ/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.

[Gerald Coley]

Yes as soon as the people get to work and can reply.

Gerald

[andrew stillie]

Ok I  requested the RMA on Wednesday evening.

[Gerald Coley]

Let me check.

Gerald

[andrew stillie]

I still haven't heard any news?

Regards,

Andrew Stillie

[Gerald Coley]

Still working this. Not getting any cooperation.

Gerald